AlwaysCreationsTutsToo

New Tutorial

2012-02-26T23:41:00.003-05:00

Love Hugs

This tutorial was written on February 26th 2012.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a

working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome work of Jennifer Janesko.
You can view and purchase her work HERE
Please do not use her work without a license to do so.

Scrapkit of Choice: I am using Hungry Hills PTU Scrap kit called I Do Love Hugs
You can Purchase it HERE....Thank you Ali

Mask of choice:I am using Twinky's Design Mask 13(2)

You can download it HERE...Thank you Twinky

Template of Choice: I am using Melissa Creationz Template #1
You can download it HERE....Thank you Melissa

Filters used:Screen works-Dot Screen,Penta.com-Jeans
Eye Candy 4000 gradient glow on copy write..you can get it HERE

Font for word art & name is Shelter Me and copy write is
always done in Pixelette ... Get them HERE

Drop shadow used through out H-2/V-2/O-65/B-6.00
Blends used screen and soft light

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.

LET'S BEGIN

Open up Template and ShiftD and close original...delete copyright layer
resize template 800x800 for space to work...we will resize later
close all layers/choose paper of choice/copy/paste and put underneath
circle layer/go to mask of choice with these setting and click ok

Activate the rectangles frame layer/copy/paste paper of choice/on rectangle layer
selections/float/defloat/invert/now on paper layer delete/merge down/add
drop shadow

Activate the rectangles layers/magic wand/choose a color from one of
papers/flood fill rectangles with that color/add drop shadow

Activate small circle frame layer/copy/paste paper of choice/on circle layer
selections/float/defloat/invert/now on paper layer delete/merge down/add
drop shadow

Activate the small circle layers/magic wand/choose a color from one of
papers/flood fill rectangles with that color/add drop shadow

Activate large circle frame layer/copy/paste paper of choice/on circle layer
selections/float/defloat/invert/now on paper layer delete/merge down/add
drop shadow

Activate the large circle layers/magic wand/choose a color from one of
papers/flood fill rectangles with that color/add drop shadow

Activate the large circle layers/magic wand/click inside large circle/copy
paste tube close up/place where you want tube/selection/invert on circle
layer/delete on tube layer/blend screen/add drop shadow

Activate large square frame layer/copy/paste paper of choice/on square layer
selections/float/defloat/invert/now on paper layer delete/merge down/add
drop shadow

Activate the large square layers/magic wand/choose a color from one of
papers/flood fill square with that color/add drop shadow

Activate large square/copy/paste main tube and place what part you want showing
selection/on square layer invert/on tube layer delete/blend/soft light/add drop
shadow

Activate medium square frame layer/copy/paste paper of choice/on med square layer
selections/float/defloat/invert/now on paper layer delete/merge down/add
drop shadow

Activate the medium square layers/magic wand/choose a color from one of
papers/flood fill square with that color/add drop shadow

Activate medium square/copy/paste main tube and place what part you want showing
selection/on square layer invert/on tube layer delete/go to penta.com/jeans with
these setting/click ok/add drop shadow

repeat same process with small frame layer and small layer (as above)

now add the rest of your elements where you want them/make the tag your own
Have fun with it/make sure you add a drop shadow to each element

copy/paste your main tube/resize if needed/duplicate/close that layer/now on
main layer/go to screen works/dot screen/add drop shadow
on duplicate layer/blend/screen/add drop shadow

now write out I do Love Hugs and place at the top/add drop shadow

add your watermark and copyright credits...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
riggsbee53@gmail.com

Here is another version of this tutorial

New tutorial featuring BLT Designz

2012-02-24T19:48:00.000-05:00

Cosmic Love

This tutorial was written on February 24th 2012.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a

working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I'm using the awesome work of KennyK, please do not use without
permission. You can purchase his tubes HERE

Scrapkit of Choice: I am using BLT Designs Scrap kit called Cosmic Love
You can Download it HERE....Thank you Brandy

Mask of choice:I am using Weescotlass Creations WSL181 You can download it HERE...
Thank you Chelle

Filters used: Xero- Porcelain - get it HERE
Eye Candy 4000 gradient glow.. get it HERE

Font for name is Dream Scar and copy write is always done in Pixelette ...
Get them HERE

Animation Used: Scrappy Bit of Fun- Animation#6..You can get it HERE
thank you Simone

Drop shadow use through out H-2/V-2/O-65/B-6.00
Use gradient glow on name and copyright

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.

LET'S BEGIN

Open up paper of choice/copy/paste and put on top of background layer/
go to mask of choice with these setting and click ok

copy/paste frame2/place on top of mask layer/resize by 55%/
add drop shadow/place on top of mask layer

copy/doodle1/place on top of frame layer/resize by 40%/
add drop shadow/place on top of frame

copy/flower3/place on top of doodle layer/resize by 13%/
place in the middle of the doodle/duplicate and move on top of first
flower/duplicate again and place at the top of the doodle/duplicate one
last time and place at the bottom of the doodle/merge down each flower
until there is one layer/add drop shadow

copy/doodle2/place on top of frame layer/resize by 20%/mirror and place
near the top of the first flower/duplicate and bring the second one down
duplicate a last time and bring it down a little more(see my tag for reference)
merge down each doodle until you have one layer/add drop shadow

now close out the mask layer and take your magic wand and click inside
of the frame layer/selections modify by 10/copy and paste paper of choice/
resize paper/go to selections/invert on frame layer/delete on paper layer
make sure paper layer is underneath frame layer

copy/paste your tube or closeup of choice/place inside frame the part you want
to show/resize if needed/go to Xero- Porcelain/with these setting/click ok/

add drop shadow

now it's time to have some fun/add any element you want to make the tag your
own creation/resize to your liking/add drop shadow on each element

Finally add your main tube/add drop shadow

add your watermark and copyright credits...now copy merge and go to animation shop

Animation

copy/merge and take tag to animation shop/open up the animation/edit/duplicate 36x
copy/animation/paste into selection as many times as you like (I did 4x)
view animation/if you're happy with it /save as gif

now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
riggsbee53@gmail.com

Love In The Air

2012-01-28T19:53:00.002-05:00

This tutorial was written on January 28th 2012.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a working

knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other

Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Ismael Rac.I used one with a close up

Please do not use unless you have a license to do so. You can get his tubes HERE

Scrapkit of Choice: I am using Mythical Designs PTU Scrap kit called Love In The Air

You can purchase it HERE....Thank you Mythical

Mask of choice:I am using Yez mask #052

You can download it HERE...

Thank you Yez

Template of Choice: I am using Kittz Kreationz-Template

You can download it HERE....Thank you Kittz

Animation Used: Scappy Bit Of Fun Sparkle Hearts- Ani 21
You can download HERE...Thanks Simone

Filters used: Eye Candy 4000 gradient glow- Xero- Radiance..

Font for word art & name is Organic Elements

and copy write is always done in Pixelette ...

Get them HERE

Drop shadow use through out H-2/V-2/O-65/B-6.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own

you do not have to use any of the supplies I used.

LET'S BEGIN

Open up Template and ShiftD and close original...delete copyright layer

resize template 691x652 for space to work/we will resize again at the end/

close all layers/choose paper of choice/copy/paste and put underneath

brush layer/go to mask of choice with these setting and click ok

Copy/paste element #23/resize and place on top of mask layer/add drop shadow

On the following raster layers follow these directions...

activate lg rectangle layer/copy/paste paper of choice/go to lg rectangle layer

invert/go to paper layer and delete/merge down/add drop shadow

copy/paste element#3 on top of lg rectangle layer/resize/add drop shadow/

duplicate 2x/space them beside one another/merge down to one layer

activate thin rectangle layer/copy/paste paper of choice/go to thin rectangle layer

invert/go to paper layer and delete/merge down/add drop shadow

activate rectangle 1 layer/copy/paste paper of choice/I used the same paper as the

lg rectangle/go to rectangle 1 layer/invert/go to paper layer and

delete/merge down/add drop shadow

activate rectangle 2 layer/copy/paste paper of choice/I used the same paper as the

lg rectangle/activate diamond line 1/select/float/defloat/choose color from kit/flood fill

diamond line/add drop shadow

activate diamond line 1/select/float/defloat/choose color from kit/flood fill

diamond line/add drop shadow

activate diamond line 2/select/float/defloat/choose color from kit/flood fill

diamond line/add drop shadow

activate square 1/with magic wand click inside square/copy/paste paper of choice

go to square 1 layer/invert/go to paper layer and delete/merge down/add drop shadow

copy/paste close up of your tube into the square 1/resize to fit/duplicate/close copy

layer/now go to blend/click screen/open copy layer and lower opacity to 42/put

screen layer on top of copy layer

activate square 2/with magic wand click inside square/copy/paste paper of choice

go to square 2 layer/invert/go to paper layer and delete/merge down/add drop shadow

copy/paste close up of your tube into the square 2/resize to fit/duplicate/close copy

layer/xero/radiance with these setting

now go to blend/click soft light/open copy

layer and lower opacity to 42/put soft light layer on top of copy layer

activate lg heart 1 layer/copy/paste paper of choice/go to lg heart 1 layer

invert/go to paper layer and delete/merge down/add drop shadow

activate lg heart 2 layer/copy/paste paper of choice/go to lg heart 2 layer

invert/go to paper layer and delete/merge down/add drop shadow

take magic wand and activate hearts1 layer/flood fill with color from kit/do

the same with hearts2 layer/deactivate and give drop shadow

now add the rest of your elements where you want them/make the tag your own

Have fun with it/make sure you add a drop shadow to each element.

choose your font and type Love In The Air and place on the top lg heart #2

see my tag for example/ add drop shadow

add your watermark and copyright credits/give it a slight gradient glow

...now give your tag to a friend.

Animation

Copy merge your tag and take to animation shop
open up Simone's animation
go to your tags and add the number of layers you need
from the animation-you should have 53 layers
once that's done go to edit/select all/on your tag
now go to Simone's animation/edit /select all/copy
go to your tag and paste into selection
where you want the animation/Do this again
save as gif

You're done...thank you for trying my tutorial

please send me a copy so that I can show case it on my blog

riggsbee53@gmail.com

Show Off Tag

2012-01-26T22:20:00.000-05:00

Here's a tag I did using Mythical Designs PTU Autumn Becomes Winter

Scrap kit. You can purchase this awesome scrap kit HERE

EMOtastic

2012-01-19T15:39:00.000-05:00

This tutorial was written on January 17th 2012.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a working

knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other

Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the amazing artwork of Eugene Rzhevskii

Please do not use unless you have a license to do so. You can

purchase his tubes HERE

Scrapkit of Choice: I am using Mythical Designs PTU Scrap kit called

Emotastic...You can purchase it HERE....Thank you Mythical

Mask of choice: I am using Chichi Designz2 #3 You can download it

HERE...Thank you Chichi

Filters used: No filters

Font is Stereofidelic and copy write is always

done in Pixelette ... Get them HERE

Drop shadow use through out H-2/V-2/O-65/B-6.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own

you do not have to use any of the supplies I used.

LET'S BEGIN

open up the cluster frame/layer new raster layer/copy/paste paper of choice

go to layers/load/save mask/save mask from disc/with this setting/click ok

layers/merge group

go to frame layer and click inside of frame/selection modify/expand by 8

copy paste paper of choice/resize to fit/now go to frame layer/invent

now go to paper layer and delete/place paper underneath frame/add drop

shadow to frame

click inside frame/selections modify by 8/copy/paste close up tube on top

of frame/resize/now go to frame layer/selection/invert/go to tube layer

and delete/add drop shadow/duplicate tube/on original tube layer/left click

blend/screen/on duplicate layer lower opacity to 76

add any element you wish to use from the kit/resize if needed/add drop shadow

add your main tube/mirror/resize/adjust sharpen/add drop shadow

add your watermark and copyright credits...now give your tag to a friend.

You're done...thank you for trying my tutorial

please send me a copy so that I can show case it on my blog

riggsbee53@gmail.com

Winter Elegance

2012-01-19T14:30:00.002-05:00

This tutorial was written on January 17th 2011.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a working

knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome work of Elias Chatzoudis

please do not use his work without a license to do so

you can purchase his tubes HERE

Scrapkit of Choice: I am using Mythical Designs PTU Scrap kit called

Winter Elegance...You can purchase it HERE....Thank you Mythical

Mask of choice:I am using moon beans and spiderwebs mask 16

You can download it HERE...Thank you Staci

Template of Choice: I am using Additive Pleasures xmas Template #8

You can download it HERE....Thank you Tammy

Filters used:..Xero -radiance, Eye Candy5/ nature - icicles and smoke

Eye Candy 4000/gradient glow on text and name

Blends-Screen-overlay and soft light

Font for is Santa's Sleigh-Full and copy write is

always done in Pixelette ... Get them HERE

Drop shadow use through out H-+2/V-2/O-65/B-6.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own

you do not have to use any of the supplies I used.

LET'S BEGIN

Open up Template and ShiftD and close original...delete copyright layer

resize template 700x700 for space to work/we will resize later

close all layers/choose paper of choice/copy/paste and put underneath

raster layer1/go to mask of choice with these setting and click ok

resize each layer 90%/On the each layers except dotted and

word art layers follow these directions...

selection/float/defloat/copy-paste paper of choice/go to raster layer

and invert/then go to paper layer and delete/merge down and add drop

shadow

now where there was a glitter layer /once you merge down go to adjust

add/remove noise/add noise with these setting below/then add your drop shadow

Now you can choose to create your tag the way you want or follow my lead

close all layer except your mask layer and glitter rectangle layer

on your glitter rectangle layer/copy/paste element 6/duplicated and move it

next to the one you just paste/duplicate again and image/mirror/duplicate

that and move over just a bit/you should have 4 trees/merge each layer down

until you have one layer with all four trees on it/adjust/sharpen/

add drop shadow

open your rectangle layer/copy paste your close up tube 3x/resize by 70%/

80% and 90%/on the 70% layer go to blend and choose screen/80% layer go to

blend and choose overlay/ and on the 90% go to blend and choose soft light/

add drop shadow.

Open your text layer and recolor the teal words to match your colors on your tag

leave your dotted rectangle layer as is

on your glitter circle layer/copy/paste element 31/resize by 65%/add drop

shadow

on the circle layer/copy/paste your close up again/resize by 90%/mirror/

take magic wand and click on circle/now go to selections/invert/go to tube

layer and delete/add drop shadow/now go to xero/radiance with this setting

click ok/leave dotted circle as is

open sm glitter circle and small circle/copy/paste element 8/resize by 30%

place on top of small circle/add drop shadow/go to Eye Candy5/icicles with

this setting/click ok

add your main tube and mirror/resize by 95%/add drop shadow/go to eye candy5

smoke with this setting/click ok/

merge down the three word art layers/place

them on top of tube leg/now go to eye candy 4000/gradient glow with this

setting/add drop shadow/also add to name,but click 2x

add your watermark and copyright credits...

now give your tag to a friend.

You're done...thank you for trying my tutorial

if you try it, please send me a copy so that

I can show case it on my blog

riggsbee53@gmail.com

New Tutorial- Freeze

2012-01-12T02:27:00.002-05:00

This tutorial was written on January 11th 2011.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a working

knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other

Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the art work of Martin Able

You can purchase it HERE

Please do not use without a license to do so

Scrapkit of Choice: I am using Honor Scraps PTU Scrap

kit called Gentle Freeze You can purchase it HERE....Thank you Honor

Mask of choice:I am using moon beans and spiderwebs #20

You can download it HERE..Thank you Staci

         Template of Choice: I am using Chica winter Template #1
   You can download it HERE....Thank you Chica

     Filters used:..Xero -radiance,penta.com-jeans,

eye candy5/nature-snow drift and icicles.

Font for word art & name is and copy write is always

       done in Pixelette ...Get them HERE

    Drop shadow use through out H-2/V-2/O-65/B-6.00

   Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination

and make the tag your own you do not have

to use any of the supplies I used.

LET'S BEGIN

            Open up Template and ShiftD and close original...delete copyright layer
         resize template 600x600 for space to work/we will resize later
             close all layers/choose paper of choice/copy/paste and put underneath
             raster layer1/go to mask of choice with these setting and click ok

On the each raster layers follow these directions

selection/float/defloat/copy-paste paper of choice/go to raster layer
and invert/then go to paper layer and delete/merge down and add drop shadow

copy/paste snowflake 4/resize/duplicate 19 times/x out all layers but

snowflakes/merge visable/add drop shadow and put underneath circle layer

add the igloo/white tree/sign and snowman/resize and add drop shadow

add your main tube/resize and add drop shadow

on the three circle/selection/float/defloat/copy-paste paper of choice

go to circle layer and invert/then go to paper layer and delete/effect
     3D effect/inner bevel/with these setting/click ok/do this on all 3 circles

       activate circle2/selections/float defloat/take you tube and place the part
         you want to show/go to circle layer and invert/then go to tube layer and     delete/now go to xero/radiance with these setting/click ok

                                  activate circle4/selections/float defloat/take you tube and place the part
                                  you want to show/go to circle layer and invert/then go to tube layer and
                                         delete/now go to penta.com/jeans with these setting/click ok

                                on circle 3 place whatever element you wish to use/add drop shadow
                                       add any other elements you wish to use/add drop shadow

                               on the candle layer I added Eye Candy 5/snow drift with these setting/

on the snowman and candle I added Eye Candy5/icicles with these setting

                              add your watermark and copyright credits...now give your tag to a friend.

                                                    You're done...thank you for trying my tutorial
                               if you try it,please send me a copy so that I can show case it on my blog
                                                                  riggsbee53@gmail.com

Ice Angel

2012-01-09T23:49:00.002-05:00

This tutorial was written on January 9th 2012.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a working

knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,but can be

adapted to use in other Paint Shop Pro versions.

SUPPLIES NEEDED

Scrapkit of Choice: I am using Hungry Hills PTU Scrap kit called Ice Angel
You can purchase it HERE....Thank you

Mask of choice:I am using Enchanted By Darkness 64 You can download it HERE...
Thank you

Filters used: Penta.com-color dot/ gradient glow..you can get it

Font for wordart & name is Aladdin and copy write is always done in Pixelette ...
Get them HERE

Drop shadow use through out H-2/V-2/O-65/B-6.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.

LET'S BEGIN

Open up new raster layer 600x600 (will resize later)
choose a paper of choice/copy/paste onto canvas
go to mask of choice with these setting and click ok

usng ellipse too/background white-foreground null/draw out a large ellipse
go to adjust/noise with these setting and click ok

pick a color from one of the papers/put in both foreground and background
now go to gradient and chose duotone light blue with these setting/click ok

recolor to match the color of the kit/go to effect/penta.com/color dot with
these setting/click ok

copy/paste open doorway to canvas/add drop shadow
copy/paste ice/resize and add to top doorway/add drop shadow
now add ice to each window top after resizing/add drop shadow
copy/paste wreath/resize and add to top of the window/add drop shadow

copy/paste doodle-1/resize and paste underneath door/duplicate and
mirror/merge down/add drop shadow

copy/paste glitter/resize and paste underneath doodle/duplicate and
mirror/merge down add light drop shadow/1/1/10/3

copy and paste tube of choice/I used the one within the kit/resize and place
where you want it/add drop shadow

now add the rest of your elements where you want them.make the tag your own.Have
fun with it/make sure you add a drop shadow to each element.

add your watermark and copyright credits...now give your tag to a friend.

You're done...thank you for trying my tutorial
if you use please send me a copy so that I can show case it on my blog
riggsbee53@gmail.com

Joyous Holiday

2011-12-27T13:09:00.001-05:00

This tutorial was written on December 27th 2011.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a
working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I'm using Cuddly Rigor Mortis. Please do not use without

a license to used. You Can get it Here

Christmas Card is from Tina Raparanta/Misstina get it Here

Word art of Choice: I'm using Christmas Word art from Doodles From My Noodle

Lori is no longer with us,May she rest in Peace, but her gorgeous work will

live on.Thanks Lori

Font for name is Kingthings2 and copy write is always done in Pixelette ...

Get them HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own

you do not have to use any of the supplies I used.Just have fun creating.

This will be quick and easy

LET'S BEGIN

Open up the back card and ShiftD and close original

Decorate your card with your tube of choice and whatever word art you chose

You can also use a Christmas Scrapkit and use the elements from the kit

Add drop shadow on everything

Open up the front card and ShiftD and close original

On the front card add your tube and any message you like to say in font of

choice. Add drop shadow on every thing.

add your watermark and copyright credits...now give your tag to a friend.

To animate

Copy/paste back card into animation shop/go back and copy/paste front

card before back card.

Edit select all/Animation/frame properties and set at 100

View animation to see if it's to your liking and save as gif

You're done...thank you for trying my tutorial..if you try this

please send me a copy so that I can show case it on my blog

www.riggsbee53@gmail.com

Two New Cluster Frames

2011-11-18T23:12:00.002-05:00

Two new cluster frames from Brokensky Dezine
new scrap kit Falling For Autumn

You can purchase the kit HERE and
download the frames HERE or HERE

Download

Go visit Tonya blog and check out all her PTU Scrap kits..
Leave some love it you download the frames

Witching Magic

2011-11-10T16:08:00.002-05:00

/This tutorial was written on November 7th 2011.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a working

knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Scrapkit of Choice: I am using Diva Designz PTU Scrap kit called Witching Dreams
You can purchase it HERE....Thank you

Mask of choice:I am using Weescotlass Creations WSL14 You can download it HERE...
Thank you Chelle

Template of Choice: I am using Toxic Desirez Scraps-Template #96
You can download it HERE....Thank you Kristin

Filters used:Eye Candy 4000 gradient glow..you can get it HERE

Font for name is Creepy and copy write is always done in Pixelette ...
Get them HERE

Drop shadow use through out H-2/V-2/O-65/B-6.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.

LET'S BEGIN

Open up Template and ShiftD and close original...delete copyright layer
resize template 698x529 for space to work
close all layers/choose paper of choice/copy/paste and put underneath
brush layer/go to mask of choice with these setting and click ok

On the following raster layers follow these directions...

activate rectangle layer/copy/paste paper of choice/go to rectangle layer
invert/go to paper layer and delete/merge down/add drop shadow

activate word backlayer/add drop shadow

activate word layer/copy/paste paper of choice/or use color of choice
if you use paper/go to word layer invert/go to paper layer and delete/
if you use color- use magic wand to click on the word/go to color
pallet and choose a color close to the kit/flood fill with that color
add drop shadow

activate starslayer/copy/paste paper of choice/or color of choice
if you use paper/go to word layer invert/go to paper layer and delete/
if you use color- use magic wand to click on the word/go to color
pallet and choose a color close to the kit/flood fill with that color
add drop shadow

on your star layer add gradient glow with these setting below

copy/paste your main tube /position it where you want it/add drop shadow

now add the rest of your elements where you want them.make the tag your own.Have fun
with it/make sure you add a drop shadow to each element.

add your watermark and copyright credits...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
riggsbee53@gmail.com

Gothic Touch

2011-10-27T18:53:00.002-04:00

This tutorial was written on November 24th 2011.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a

working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Gothique Starr..You can purchase
her tubes HERE...Please do not use without a license to do so

Mask of choice:I am using Weescotslass Creations WSL89 You can download it HERE...
Thank you Chelle

Template of Choice: I am using Saras Sinful creations-Template #20

Sara blog has been removed..If you know where she is please email me

please use another template....Thank you Sara

Scrapkit of Choice: I am using Mythical Designs PTU Scrap kit called Gothic Touch
You can purchase it HERE....Thank you Mythical

Filters used: flaming pear-glare ...HERE and Eye Candy 4000 gradient glow..you can get it HERE

Font for word art & name is Piaguedeath and copy write is always done in Pixelette ...
Get them HERE

Drop shadow use through out H-2/V-2/O-65/B-6.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.

LET'S BEGIN

Open up Template and Shift D and close original...delete copyright layer
resize template 698x529 for space to work
close all layers/choose paper of choice/copy/paste and put underneath
rectangle layer/go to mask of choice with these setting and click ok

On the following raster layers follow these directions...

activate rectangle layer/copy/paste paper of choice/go to rectangle layer
invert/go to paper layer and delete/merge down/add drop shadow

activate circle layer/copy/paste paper of choice/go to circle layer invert/
go to paper layer and delete/merge down/add drop shadow

activate rectangle1 layer/copy/paste paper of choice/go to rectangle1 layer
invert/go to paper layer and delete/merge down/add drop shadow

activate rectangle2 layer/copy/paste paper of choice/go to rectangle2 layer
invert/go to paper layer and delete/merge down/add drop shadow

activate ribbon1 layer/copy/paste paper of choice/go to ribbon1 layer
invert/go to paper layer and delete/merge down/add drop shadow

activate ribbon2 layer/copy/paste paper of choice/go to ribbon2 layer
invert/go to paper layer and delete/merge down/add drop shadow

on rectangle layer/copy/paste the tree/resize to fit/blend/screen/duplicate2x
so that the tree stands out

on the circle layer/copy/paste element3/resize to fit/lower opacity to 60%

on rectangle1 layer/copy/paste element 24/resize to fit/blend mode/over layer

on rectangle2 layer/copy/paste your closeup tube/resize to fit the way you want
lower opacity to 70%/apply flaming pear filter with these setting below

riggsbee53@gmail.com

I'll Be Your Treat

2011-10-12T01:19:00.003-04:00

This tutorial was written on October 11th 2011.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a

working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Ismael Rac..You can purchase
his tubes HERE...Please do not use without a license to do so

Template of Choice: I am using Scrappity Scrap and More Halloween Template #9
You can download it HERE....Thank you Mirella

Scrapkit of Choice: I am using Broken Sky De sine PTU Scrap kit called Trick or Treat
You can purchase it HERE....Thank you Tonya

Filters used:Penta.com - Jeans - Xero- Fritillary and Porcelaid-

Eye Candy 4000- Gradient Glow

Get them HERE

Font for word art and name is Parseltongue and copy write is always done in Pixelette ...
Get them HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.

LET'S BEGIN

Open up Template and Shift D and close original...delete copyright layer
close all layers except the background layer...the one we'll be working on
Choose paper of choice/paste underneath all layers.

On the following raster layers follow these directions...

activate large rectangle layer/copy/paste paper of choice/go to large rectangle layer
invert/go to paper layer and delete/merge down/add drop shadow

activate square layer/copy/paste paper of choice/go to square layer invert/
go to paper layer and delete/merge down/add drop shadow

activate half circle layer/copy/paste paper of choice/go to half circle layer invert/
go to paper layer and delete/merge down/add drop shadow

activate circle layer/copy/paste paper of choice/go to circle layer invert/
go to paper layer and delete/merge down/add drop shadow

activate small rectangle layer/copy/paste paper of choice/go to small rectangle layer
invert/go to paper layer and delete/merge down/add drop shadow

leave the following layers as is

Copy of vector1,2 and 3 and raster 9 and 10 and delete raster layer4

On square layer/copy/paste your close up tube on top/once placed take your freehand
selection tool and trace any part you do not want to show/on your tube layer go to
penta.com-jeans with these setting/click ok/add drop shadow

On circle layer/selection/float/defloat/invert layer/copy paste your smaller tube
position it where you want the part to show and then delete/remove any excess tube
go to xero- fritillary with these setting/click ok/now go to xero/porcelaid with
these setting/click ok/add drop shadow

copy/paste your main tube /position it where you want it/go to gradient glow with
these setting/click ok/ add drop shadow

now add the rest of your elements where you want them.make the tag your own.Have fun
with it/make sure you add a drop shadow to each element.

add your watermark and copyright credits...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
riggsbee53@gmail.com

New Award

2011-10-11T19:38:00.001-04:00

BEAUTI♥LICIOUS AWARD!

This award is for the Beautiful Women (and Men)

who grace us with their talents

in the Tagger Community.

The intent of this award is to pass it on

to the Designer, Tagger, or Artist

who has inspired you with their endless talent

and who has touched your heart.
There are many out there.

I received this award from Royal Designs by Coolfunlife

Check out her blog HERE

Let's see how far we can pass this on

♥HERE'S TO ALL YOU BEAUTIFUL PEOPLE!♥

I choose to pass this to:

Mythical Designs

Devious Desires

Broken Sky Desine

Gothic Inspirations

Crystals Creations

Once you have received this award

Please pass it on to five blogs

to show some love

for those who truly are BEAUTIFUL.

Let's see how far we can pass this on!!!

Hallow EMO

2011-09-25T19:14:00.003-04:00

This tutorial was written on September 24th 2011.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a

working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Eugene Rzhevskii ..You can purchase
his tubes HERE...Please do not use without a license to do so

Scrapkit of Choice: I am using Designz by Stina Coll-ab PTU Happy Hallow EMO
You can purchase it HERE....Thank you Stina

Mask of Choice: I'm using one of Insatiable Dreams #38...You can find it HERE
Put mask in mask folder..Thanks so much for the use of your Cat

Template of Choice: I'm using Dezigns by Ali #69. Ali is no longer in the Scrap
business. Please choose another template. We wish her much success in whatever
she does.She will be missed amongst the tagging world.Thanks Ali

Filters used:Mura's Meister -Copies/ Xero- Porcelain/Eye Candy 4000-Gradient Glow

Font for name is Creep-ville, font for word art is Awakening

and copy write is always done in Pixelette ...
Get them HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used,but by all means have fun
making your tag.

LET'S BEGIN

Open Template/shift/D/ Close the original Template/delete credit layer
Image/ resize 700x700 /we will resize again at the end

go to last layer/copy/paste paper of choice/place below black circle layer
resize paper to fit canvas/now go to layers/load/save mask/load mask from
disk/ and find your mask of choice...with these setting see photo below....

go to layers/merge group

open black circle layer/copy/paste paper of choice/resize paper/on circle
layer/selection/float/unfloat/invert/go to paper layer and delete/layers
new raster layer on top of black circle layer/Text tool/background/foreground
white/size 10/font-awakening/Type out Happy Hallow EMO/Convert to raster/Object
center/selection/float/defloat on black circle/effect/mura's meister/copies
with these setting

delete extra layer/selections/none/add drop shadow

On circles 4-3 and 2/one at a time/selections/float/defloat/invert/copy/paste
paper of choice/resize to fit/delete paper layer/selection/none/merge down/
place spider frame of choice on each of the small circles

open your tube and place a different part on each of the small circles/one at
a time/you may need to resize the tube to get it to fit the way you want.
Do the same with circle one/add xero porcelain with these setting

add your remaining elements to finish up your tag
add your main tube

add copy right and your watermark

now give to a friend

thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it...riggsbee53@gmail.com

Things That Go Bump In The Night

2011-09-21T22:25:00.005-04:00

This tutorial was written on September 17th 2011.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a

working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Scrapkit of Choice: Always Creations-Halloween for You. you can get it HERE
please follow my TOU

Tube of Choice: I am using the awesome artwork of Pinup toons..You can purchase
his tubes HERE...Please do not use without a license to do so

Mask of Choice: I'm using one of Vix Halloween 2010 #1...You can find it HERE
Put mask in mask folder..Thanks so much for the use of your Vix

Template of Choice:I'm using Denz Designz #160.You can get it HERE
Thank you Denny

ghost of choice or you can used mine.

HERE please follow my TOU

Filter of Choice:Eye Candy 4000-Gradient Glow-HERE

Font for name is Ash and copy write is always done in Pixelette ...
Get them HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.
my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.

LET'S BEGIN

Open Template/ShiftD/delete original template/delete copyright layer
close all layers except background layer/copy/paste paper of choice/resize
go to layersload/save mask/find your mask/setup with these setting below

click ok/merge group.

activate shape2 layer/copy/paste paper of choice/go to effects/gradient glow with
these setting below(do this for each template layer)

activate shape1 layer/copy/paste paper of choice/go to effects/gradient glow with
these setting below/add the glow

activate rectangle layer/copy/paste paper of choice/go to effects/gradient glow with
these setting below/add the glow

activate circle1 layer/copy/paste paper of choice/go to effects/gradient glow with
these setting below/add the glow

activate circle2 layer/copy/paste paper of choice/go to effects/gradient glow with
these setting below/add the glow

place the web on top of circle2/resize web to fit/now copy/paste spider/resize
duplicate 4x moving the spider up a little each time until you get to the top
close copies until later

place the bats where you want them/add the ghost where you want it/add drop
shadow to them/ add the orange eyes/place the lids on top of the eyes/close the
lid layer until time to animate

activate all word art and change the colors to orange/add the glow
place your tube where you want it to be/resize/add drop shadow

resize tag if needed/Add your water mark and copyright/on the name add the same
gradient glow 2 times/duplicate and move over just a little/duplicate and move over
just a little again/merge down after each duplication so that the name is triple
(see my tag)

to animate
your first spider layer and the eyes should be open
all other spiders and lids closed
Copy merge/paste to animation shop as a new layer

back to paint shop pro/close first spider layer and eyes
open up the next spider layer and lids copy merge/paste after current tag

back to paint shop pro/close second spider layer and lids
open up the next spider layer and eyes copy merge/paste after current tag

back to paint shop pro/close third spider layer and eyes
open up the next spider layer and lids copy merge/paste after current tag

back to paint shop pro/close fourth spider layer and eyes
open up the next spider layer and eyes copy merge/paste after current tag

you should have 5 layers/three with eyes and two with lids
edit select all/animation/frame property 100
save as gif

now give to a friend

thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it...riggsbee53@gmail.com

Creepy Hollow

2011-09-16T18:01:00.003-04:00

This tutorial was written on September 15th 2011.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a

working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Michael Calandra..You can purchase
his tubes HERE...Please do not use without a license to do so

Scrapkit of Choice: I am using Aussie Scrap Designs PTU Scrap kit called Creepy Hollow
You can purchase it HERE....Thank you Gail

Mask of Choice: I'm using one of Vix Halloween 2010 #10...You can find it HERE
Put mask in mask folder..Thanks so much for the use of your Vix

Filters used:Screen work - Fabric Weave...get it HERE

Font for name is Blue Highway D Type and copy write is always done in Pixelette ...
Get them HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.

LET'S BEGIN

Open Up a new raster layer 700x630.floodfill white/Overtop of background layer/copy
paste paper of choice from kit/resize to fit layer...now go to layers/load/
save mask/load mask from disk/ and find your mask of choice...with these setting
see photo below....go to layers/merge group

go to preset shape/with setting below/make a rectangle about the size as mine(see tag)
convert to raster/choose paper of choice from kit/resize to fit the rectangle layer/
with magic wand click on rectangle/on rectangle layer/selection/invert/go to paper
layer and delete.

copy/paste spider web from kit/place on left side of rectangle near the edge/place
spider near the edge at the top/duplicate 8x and move a spider down a little each
time so that you have a trail of the spider going down the page/close all the
spiders except the first spider

open/copy/paste/resize the scare cross/place on the left side on top of the trail
of spiders/add drop shadow
add the bat and duplicate 2x/place in the upper right corner and spread the bats
out/place the cloud over two of them.
copy/place/resize and place the dying tree2 on the right hand size/add drop shadow
copy/place/resize and place the head stone over top the tree/add drop shadow

copy/paste the spider/place on right side of tomb stone/placespider near the edge
at the bottom/duplicate 8x and move a spider up a little each time so that you
have a trail of the spider going up the tomb stone/close all the spiders except
the first spider
copy/paste/resize your tube and place behind tombstone/duplicate and close this layer
noe go to screenwork/fabic weave/change the blend mode to screen/open the duplicate
and lower the opacity to 60%.now open your tube and select the top part and paste
on the other side on top of the cross/add drop shadow and change blend mode to hard light.

Add the wordart Creepy hollow /add drop shadow/resize your tag
Add your water mark and copyright

to animate

Copy merge/paste to animation shop as a new layer
back to paint shop pro/close two spider layers and
open up the next two spider layers
copymerge/paste after current tag
continute until all spider layers are copy into animation shop
you should have 8 layers
edit select all/animation/frame property 100
save as gif

now give to a friend

thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it...riggsbee53@gmail.com

Haunted by Memories

2011-09-13T21:19:00.003-04:00

This tutorial was written on September 12th 2011.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a

working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9

,but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Michael Calandra.
You can purchase his tubes HERE...you will need a tube that's laying or crawling
Please do not use without a license to do so

Scrapkit of Choice: I am using a Broken Dreams Designs PTU Scrapkit- Haunted By Memories .
You can purchase it HERE....Thank you Tonya

Mask of choice:I'm using a mask by Chichi #1. You can find it HERE..thank you Cindy

Font for name is Inked God and copy write is always done in Pixelette ...
Get them HERE

Filter: Eye Candy 4000/Gradient Glow..Get it Here
Drop shadow use throughout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.this will be a quick tag.

LET'S BEGIN

open new raster layer 700x700/copy/paste paper of choice from kit/go to layers/load/
save mask/load mask from disk/find your mask and load with these setting then merge group

open frame1/move down a little/with magic wand click inside frame/selection/modify by 10
copy/paste paper of choice/resize/go to frame layer and invert/then paper layer and delete

take you tube/copy/paste and place on top the frame on the left/duplicate/place this copy
underneath the frame/now take your ereaser tool and erase any area that needs to be take
off the top of the frame.

add any more elements you wish to use/make sure you add a drop shadow to each element.
place your main tube where you want it/add drop shadow.(see my tag if needed)

resize your tag/Add your copyright and watermark-(I put a slight gradient glow on mine)
now it's ready to give to a friend

thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it...riggsbee53@gmail.com

Freddy's Curse

2011-09-13T17:40:00.002-04:00

This tutorial was written on September 12th 2011.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a
working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Duncan Long.
You can purchase his tubes HERE...you will need a tube that's laying or crawling
Please do not use without a license to do so

Scrapkit of Choice: I am using a Broken Dreams Designs PTU Scrapkit- Haunted House .
You can purchase it HERE....Thank you Tonya

Font for name is Creep ville and copy write is always done in Pixelette ...
Get them HERE

Drop shadow use throughout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.

LET'S BEGIN

first open up frame1/take your magic wand and click inside/copy/paste paper 8/
resize to fit the frame/close off/selection/modify by 6/go to frame layer and
invert/now go to paper layer and delete/select none/minimize this for now.

open up the haunted house/shift D and close original layer/resize 700x688/move
house a little lower on canvas/close off for now/copy/paste bllodsplatter1/duplicate
mirror/duplicate/flip/duplicate mirror/merge visible all four layers.This is your mask.

open up your house layer and copy/paste the bloody chain/resize to fit the wood slates
on the house. If you place on top of the railings then use your eraser tool to erase the
prts on top so it looks like it's underneath. once that is done merge visible all chain layers
then merge down on top of the house

now open up the paper layer you previous did.you're going to used just the paper/copy/paste
above house layer and place toward the top (see my tag for directions)resize and go to
adjust/sharpen so the words stand out.open the hand and resize until you get the size you want.
place the hand under the house on the right hand side/duplicate the hand four more time/each time
bringing it out from underneath the house more and more/once you paste the fifth one/close all of
them except the first one.

add any more elements you wish to use/make sure you add a drop shadow to each element.
place your main tube where you want it/add drop shadow.(see my tag if needed)

resize your tag/Add your copyright and watermark-(I put a slight gradient glow on mine)

To animate

copy/merge all layers except the 4 duplicates of the hand/go to animation shop and paste as
new layer/go back and close the first hand and open the second hand and paste in animations
shop after current frame/repeat until you do the fourth copy of the hand/now go back and
close the fourth layer and reopen the third layer/copy merge and paste in animation shop
behind current layer/ do this until you get to the original hand layer/you should have 9
frames/go to edit/select all/animation/frame properties and change to 100

view animated/if happy save as gif/now it's ready to give to a friend

thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it...riggsbee53@gmail.com

Autumn Leaves

2011-09-12T02:21:00.003-04:00

This tutorial was written on September 10th 2011.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a

working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Pinuptoons..
You can purchase his tubes HERE...you will need a closeup and regular tube
Please do not use without a license to do so

Scrapkit of Choice: I am using a Sarah Hungry Hills PTU Scrapkit- Subtle Autumn .
You can purchase it HERE....Thank you Sarah

Template of Choice: I'm using a template by Blissfully Beth #9. You can get it HERE.
Thank you for the Share Beth

Mask of Choice: I'm using Creative Misfit Autumn Collection. Place in your mask folder.
You can get it HERE. Thanks Aqua

Filter Used:Eye Candy 4000-Grandient Glow...You can get it HERE
Gradient: Autumn Gradient from Elevn Sword...You can get it HERE

Font for name is HT Trattona and copy write is always done in Pixelette ...
Get them HERE

animation fallen leaves...Here

Dropshadow use througout H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.

LET'S BEGIN
Open template/Image resize all layer to 600x600/shiftD/close original template.
Remove background and credits.Close out every layer. Choose paper of choice/
paste underneath all layers.Go to layers/load/save mask/load mask from disk/
find your mask of choice and paste with these setting.merge group

Do the following task to layers 1-7/merge down after each task and add a drop shadow

copy/paste paper of choice/go to the layer/invert/go to paper layer and delete

put the tree behind layer 6/add a drop shadow.

add any other elements you wish to use/make sure you add a drop shadow to each element.
place your main tube where you want it/add drop shadow.(see my tag if needed)

Resize if needed/Add your copyright and watermark-(I put a slight gradient glow on mine)

now it's time to animate

copy merge/paste your tag into animation shop/open up your animation leaves into
animation shop/duplicate your tag with the same number of layers as the animation
you should have 27 layers/edit/select all/animation/frame properties/30
save as gif

thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it...riggsbee53@gmail.com

Any Day Now

2011-09-10T16:55:00.003-04:00

This tutorial was written on September 10th 2011.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a

working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Suzanne Woolcott.
You can purchase her tubes HERE...you will need a 2 images and regular tube
Please do not use without a license to do so

Scrap kit of Choice: I am using a Sunshine Daze PTU Scrap kit- Any Day Now.
You can purchase it HERE....Thank you Dawn

Template of Choice: I'm using a template by Denz Designs # 14. You can get it HERE.
Thank you for the Share Denny

Mask of Choice: I'm using Designs by Vaybs #131. Place in your mask folder.
You can get it HERE. Thanks Vaybs

Filter Used:No Filter was used

Font for name is Ms UI Gothic and copy write is always done in Pixelette ...
Get them HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.

LET'S BEGIN

Open template/Image resize all layer to 650x650/We will resize later/shift D/
close original template/Remove background and credits.Close out every layer.
Choose paper of choice/paste underneath all layers.Go to layers/load/
save mask/load mask from disk/find your mask of choice and paste
with these setting.merge group

activate circle2 back layer/copy/paste image of choice on the part that you
want to show/go to circle2 back layer/invert/go to paper layer and delete/merge down
change blend mode to soft light
do the same thing with circle1 back layer/change blend mode to screen

activate square layer/copy/paste paper of choice/go to square layer/invert/
go to paper layer and delete/merge down/place you main tube on top of the
white frame/add drop shadow

activate small square layer/copy/paste paper of choice/go to small square layer/
invert/go to paper layer and delete/merge down

leave all the frames white and remove the three flower layers
on the circle2 layer/go to present/ellipse/create on vector/width 1/foreground black
background null and draw a circle/new raster layer/type words of choice/convert to raster
delete present layer and blank layer.

add any elements you wish to use/make sure you add a drop shadow to each element.
place your main tube where you want it/add drop shadow.(see my tag if needed)
resize you tag if still to big.

Add your copyright and watermark/now it's ready to give to a friend

thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it... riggsbee53@gmail.com

Autumn Glory

2011-09-09T20:20:00.004-04:00

This tutorial was written on September 9th 2011.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a

working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Jennifer Janesko..
You can purchase her tubes HERE...you will need a closeup and regular tube
Please do not use without a license to do so

Scrapkit of Choice: I am using a Mythical Designs PTU Scrapkit- Autumn Glory.
You can purchase it HERE....Thank you Sally

Template of Choice: I'm using a template by Essence of Creativity #38. You can get it HERE.
Thank you for the share Yvette

Mask of Choice: I'm using Creative Misfit Autumn Collection. Place in your mask folder.
You can get it HERE. Thanks TinaNZ

Filter Used:Eye Candy 4000-Grandient Glow...You can get it HERE

Font for name is Monika and copy write is always done in Pixelette ...
Get them HERE

Dropshadow use througout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.

LET'S BEGIN

Open template/Image resize all layer to 615x615/shiftD/close original template.
Remove background and credits.Close out every layer. Choose paper of choice/
paste underneath all layers.Go to layers/load/save mask/load mask from disk/
find your mask of choice and paste with these setting.merge group

activate circle layer/copy/paste paper of choice/go to circle layer/invert/
go to paper layer and delete/merge down

activate square2 layer/copy/paste paper of choice/go to square2 layer/invert/
go to paper layer and delete/merge down

activate square1 layer/copy/paste paper of choice/go to square1 layer/invert/
go to paper layer and delete/merge down/keep activated/copy paste your close up
tube on top of square1 layer/add drop shadow and change blend mode to hard light.

activate rectangles layer/copy/paste paper of choice/go to rectangles layer/invert/
go to paper layer and delete/merge down

add any elements you wish to use/make sure you add a drop shadow to each element.
place your main tube where you want it/add drop shadow.(see my tag if needed)

Add your copyright and watermark-(I put a slight gradient glow on mine)
for the finish touch I took the sparkles and copy/paste on top of the tag
now it's ready to give to a friend

thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it.. riggsbee53@gmail.com

Fukitol - FTU Tut

2011-09-07T02:03:00.001-04:00

This tutorial was written on August 6th 2011.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a

working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Barbara Jenson..It was a bonus tube
If it's not available,use anther tube from her. You can purchase her tubes HERE...
Please do not use without a license to do so

Scrapkit of Choice: I am using a Beas Creations FTU Scrapkit-Spring.
You can download it HERE....Thank you Bea

Template of Choice: I'm using a template by Just Fi called Fukitol. You can get it HERE.
Thank you Fi for the Share

Mask of Choice: I'm using Insatiable Dreams Mask #2. Place in your mask folder.
You can get it HERE...Thanks Cat

Font for name is Chopin Script and copy write is always done in Pixelette ...
Get them HERE

Dropshadow use througout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.

LET'S BEGIN

Open template/shiftD/close original template.Remove background and credits.Close
out every layer. Choose paper of choice/paste underneath all layers. Go to layers/
load/save mask/load mask from disk/find your mask of choice and paste with these
setting.merge group.

starting with blur mask layer.Change the color to reflect your tube.I also changed
the mask layer too to the same color.

activate small black circle.Copy/paste paper of choice.go to selection/ invert circle
layer and then go to paper layer and delete/ merge down.leave small striped layer as is.

leave pink circles/pink glitter circles as is.On large black circle/activate.
Copy/paste paper of choice.go to selection/ invert circle layer and then
go to paper layer and delete/ merge down.

leave blur circle and blue glitter circle as is.I change the color on the word art to
purple/left the rectangle black and merge visible the whole thing to place it lower.
(see my tag for ference)

place your main tube on top of large circle/place it where you want it activate
large circle/I used the top part of the tube/go to selection/ invert circle layer and then
go to tube layer and delete/add drop shadow.

add any elements you wish to use/make sure you add a drop shadow to each element.
place your main tube where you want it/add drop shadow.(see my tag if needed)

Add your copyright and watermark-(I put a slight gradient glow on mine)
and give your tag to a friend
thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it...riggsbee53@gmail.com

Punk Princess With Attitude

2011-09-05T03:09:00.002-04:00

This tutorial was written on September 3st 2011.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a

working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Very Many..

You can purchase her tubes HERE...
Please do not use without a license to do so

Scrapkit of Choice: I am using Crystals Creations PTU Scrapkit- Gothic Punk
You can purchase it HERE and visit her blog HERE....Thank you Crystal

Template of Choice: I'm using a template by Toxic Desirez #36. You can get it HERE.
Thank you for the share Kristin

Mask of Choice: I'm using Insatiable Dreams #155. Place in your mask folder.
You can get it HERE. ..Thanks Cat

Filter Used:Eye Candy 4000-Grandient Glow...You can get it HERE

Font for name is Haunted Mouse and copy write is always done in Pixelette ...
Get them HERE

Dropshadow use througout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.

LET'S BEGIN

Open template/shiftD/close original template.Remove background and credits.Close
out every layer. Choose paper of choice/paste underneath all layers. Go to layers/
load/save mask/load mask from disk/find your mask of choice and paste with these
setting.merge group

activate rectangle fill layer/copy/paste paper of choice/go to rectangle fill layer/invert/
go to paper layer and delete/merge down

leave the first wordart layer the way it is

activate rectangle frame layer/copy/paste paper of choice/go to rectangle frame layer/invert/
go to paper layer and delete/merge down

copy/paste the closeup of your tube underneath the first wordart layer/duplicate and mirror
on the copy layer change blend to hard light/add drop shadow to both layers

remove the star layer if you wish.I replaced it with the star from the kit

on the second wordart/activate/copy/paste paper of choice/go to wordart layer/invert/
go to paper layer and delete/merge down

add any elements you wish to use/make sure you add a drop shadow to each element.
place your main tube where you want it/add drop shadow.(see my tag if needed)

Add your copyright and watermark-(I put a slight gradient glow on mine)
and give your tag to a friend
thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it... riggsbee53@gmail.com

PTU - Vintage Love

2011-09-02T01:00:00.001-04:00

This tutorial was written on September 1st 2011.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a

working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Jennifer Janesko..

You can purchase her tubes HERE...
Please do not use without a license to do so

Scrapkit of Choice: I am using a Queen Brat Designs

PTU Scrapkit- Vintage Love,You can purchase it HERE

and visit her blog HERE....Thank you Renee

Template of Choice: I'm using a template by Denz Designz #6.
You can get it HERE. Thank you for the Share Denny

Mask of Choice: I'm using Insatiable Dreams #37.
Place in your mask folder.
You can get it HERE. Thanks Cat

Filter Used:Mura's Meister-Copies / Filters Unlimited-Photo Aging Kit/
Eye Candy 4000-Grandient Glow.

Font for name is Arial,Renaissance and copy write is always done in Pixelette ...
Get them HERE

Dropshadow use througout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own you do not have to use any of the supplies I used.

LET'S BEGIN

pick two colors from your kit/on the blur layer/go to target brush and change
the color of the blur layer/selection/float/defloat/new raster layer/using
arial font type out my vintage love/object/centered/Mura's Meister-copy
with these setting

activate circle layer/copy/paste paper of choice/go to circle layer/invert/
go to paper layer and delete/merge down

on circle edging layer/selection/float/defloat/color of choice/selection none

bottom and top strip layer/copy/paste paper of choice/go to bottom and top layer/invert/
go to paper layer and delete/merge down

activate back1/copy/paste paper of choice/go to back1 layer/invert/
go to paper layer and delete/merge down/keep activated/copy/paste closeup of choice
place where you want it/delete tube/now go to filter unlimited 2.0-Photo aging kit
with these setting

activate back2/copy/paste paper of choice/go to back2 layer/invert/
go to paper layer and delete/merge down/keep activated/copy/paste closeup of choice
place where you want it/delete tube/now go to filter unlimited 2.0-Photo aging kit
with these setting

remove the two frame and copy/paste the lace frames of choice/resize if
needed/add drop shadow

add any elements you wish to use/make sure you add a drop shadow to each element.
place your main tube where you want it/add drop shadow.(see my tag if needed)
on the envelope/write my vintage love with the font renaissance

PTU Tutorial Cherry Pie

2011-09-01T01:31:00.002-04:00

This tutorial was written on August 31th 2011.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a

working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Keith Garvey..

You can purchase his tubes HERE...
Please do not use without a license to do so

Scrapkit of Choice: I am using a Sarah Hungry Hills PTU Scrapkit-Cherry Pie.
You can download it HERE....Thank you Sarah

Template of Choice: I'm using a template by Addicitive Pleasure #57.

You can get it HERE.
Thank you for the Share Tammy

Mask of Choice: I'm using WSL #258. Place in your mask folder.
You can get it HERE. Thanks Chelle

Filter Used:penta.com -jeans- HERE and-xero-radiance...You can get it HERE

Font for name is Organic Elements and copy write is always done in Pixelette ...
Get them HERE

Dropshadow use througout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.

LET'S BEGIN

activate circle layer/Copy/paste paper of choice.go to selection/ invert circle
layer and then go to paper layer and delete/ merge down.

keep circle activated/copy/paste closeup tube/hit delete/go to penta.com-jeans
with these setting/no go to xero-radiance with these setting

deactivate and add a drop shadow

activate rectangle3/Copy/paste paper of choice/go to selection/invert rectangle3
layer and then go to paper layer and delete/merge down/sharpen/add drop shadow

activate rectangle/Copy/paste paper of choice/go to selection/invert rectangle
layer and then go to paper layer and delete/merge down/sharpen/add drop shadow

activate raster5 layer/Copy/paste paper of choice/go to selection/invert raster5
layer and then go to paper layer and delete/merge down/sharpen/add drop shadow

activate circle2 layer/Copy/paste paper of choice/go to selection/invert circle2
layer and then go to paper layer and delete/copy/keep activated/paste next closeup
delete/change blend mode to hard light/merge down/sharpen/add drop shadow

activate rectangle4/Copy/paste paper of choice/go to selection/invert rectangle4
layer and then go to paper layer and delete/merge down/sharpen/add drop shadow

add any elements you wish to use/make sure you add a drop shadow to each element.
place your main tube where you want it/add drop shadow.(see my tag if needed)

Blessings Overflowing

2011-08-31T22:12:00.003-04:00

This tutorial was written on August 31th 2011.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a

working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Zindy Neilsen..

You can purchase his tubes HERE...
Please do not use without a license to do so

Scrapkit of Choice: I am using a Autumn Dreams by KellyJ.
This is a old scrapkit.. please chose your own fall kit....Thank you Kelly J

Template of Choice: I'm using a template by Wild Creationz #20.

You can get it HERE. Thank you for the Share

Mask of Choice: I'm using Zuz #50. Place in your mask folder.
You can get it HERE. Thanks

Font for name is Scriptina and copy write is always done in Pixelette ...
Get them HERE

Dropshadow use througout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.

LET'S BEGIN

Open template/shiftD/close original template.Remove background and credits.Close
out every layer. Choose paper of choice/paste underneath all layers. Go to layers/
load/save mask/load mask from disk/find your mask of choice and paste with these
setting.merge group.

activate dark grey rectangle.Copy/paste paper of choice.go to selection/ invert rectangle
layer and then go to paper layer and delete/ merge down.

activate left rectangle frame/Copy/paste left mini tag.activate right rectangle frame/
copy/paste right mini tag

activate circle layer/Copy/paste paper of choice.go to selection/ invert circle
layer and then go to paper layer and delete/ merge down/add drop shadow/leave activated
copy/paste tube of choice/resize to circle/leave circle frame as is

add any elements you wish to use/make sure you add a drop shadow to each element.
either add the word art or use one of your own

Add your copyright and watermark-(I put a slight gradient glow on mine)
and give your tag to a friend thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it ...riggsbee53@gmail.com

Autumn Blessings-PTU

2011-08-31T21:46:00.003-04:00

This tutorial was written on August 31th 2011.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a

working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of PinupToons..

You can purchase his tubes HERE...

Please do not use without a license to do so

Scrapkit of Choice: I am using a Scraps by Dmg PTU Scrapkit-Happy Fall ya'll.
Natalie is no longer selling her kits so please find another fall kit....Thank you Natalie

Template of Choice: I'm using a template by me #79.
You can get it HERE. please leave a thank you

Mask of Choice: I'm using Dark Yarrow Mask #10.
Place in your mask folder.
You can get it HERE. Thanks

Font for name is PMingLiU-ExtB and copy write is always done in Pixelette ...
Get them HERE

Dropshadow use througout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.This is a easy tag..great for beginners.

LET'S BEGIN

Change the color of the Twirl layer to match your kit.Add a drop shadow.

activate recangle1 layer.Copy/paste paper of choice.go to selection/ invert rectangle
layer and then go to paper layer and delete/ merge down.close this layer

activate circle layer. Copy/paste paper of choice.go to selection/ invert circle
layer and then go to paper layer and delete.merge down/cclose this layer

On rectangle2 layer/Copy/paste paper of choice.go to selection/ invert circle
layer and then go to paper layer and delete.merge down/close this layer

open rectangle layer1/copy/paste tree/resize and add drop shadow
open circle layer/copy frame of choice and paste on top of circle layer/resize
add drop shadow
Copy/paste buttom 2 on top of frame layer/resize to fit/add drop shadow

add any other elements to make your tag look like fall
copy/paste tube of choice/resize and add drop shadow(see my tag if needed)

Add your copyright and watermark and give your tag to a friend
thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it ...riggsbee53@gmail.com

Love Story - PTU

2011-08-31T20:59:00.003-04:00

This tutorial was written on August 11th 2011.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a

working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of David Desbois..

You can view his images HERE...

Please do not use without a license to do so

Scrapkit of Choice: I am using a Broken Sky Designs PTU Scrapkit-Love Story.
You can download it HERE....Thank you Tonya

Template of Choice: I'm using a template by Additive Pleasures #45. You can get it HERE.
Thank you for the Share Tammy

Mask of Choice: I'm using Artmama #05. Place in your mask folder.
You can get it HERE. Thanks Artmama

Filter Used:Eye Candy 4000 gradient glow/Penta.com -dot and cross...

You can get them HERE & HERE

Font for name is New Moon and copy write is always done in Pixelette ...
Get them HERE

Dropshadow use througout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.

LET'S BEGIN

merge group.

leave mask layer as is/change blend mode to soft light

activate big circle/copy/paste paper of choice/resize/go to circle layer
invert/go to paper layer/delete/merge down/add drop shadow/go to selection
float/defloat/copy tube of choice/resize if needed/go to circle layer/invert/
go to tube laywe/delete/add drop shadow to tube

activate strip/copy/paste paper of choice/resize/go to circle layer/invert/

go to paper layer/delete/merge down/add drop shadow

activate strip2/copy/paste paper of choice/resize/go to circle layer/invert/
go to paper layer/delete/merge down/add drop shadow

activate rectangle layer/copy/paste paper of choice/resize/go to circle layer/invert/
go to paper layer/delete/merge down/add drop shadow

activate rectangle2 layer/copy/paste paper of choice/resize/go to circle layer/invert/
go to paper layer/delete/merge down/add drop shadow

activate rectangle3 layer/copy/paste paper of choice/resize/go to circle layer/invert/
go to paper layer/delete/merge down/add drop shadow

activate rectangle4 layer/copy/paste paper of choice/resize/go to circle layer/invert/
go to paper layer/delete/merge down/add drop shadow

activate small circle layer/copy/paste paper of choice/resize/go to circle layer/invert/
go to paper layer/delete/merge down/add drop shadow

activate medium circle layer/copy/paste paper of choice/resize/go to circle layer/invert/
go to paper layer/delete/merge down/add drop shadow/go to selection/float/
defloat/copy tube of choice/resize if needed/go to circle layer/invert/

go to tube layer/delete/keep activated/now go to penta.com-dot and cross with these setting

add any other elements you wish to use/make sure you add a drop shadow to each element.
place your main tube where you want it/add drop shadow.(see my tag if needed)

Add your copyright and watermark-(I put a slight gradient glow on mine)
and give your tag to a friend
thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it

...riggsbee53@gmail.com

NewTutorial - Bewitched

2011-08-31T01:00:00.003-04:00

This tutorial was written on August 30th 2011.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a

working knowledge of using Paint Shop Pro.This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Keith Garvey..

You can purchase his tubes HERE...
Please do not use without a license to do so

Scrapkit of Choice: I am using Shell's Scraps scrapkit called Witches World. You can download it at Aussie Scrap Designs....

also visit here blog HERE she has awesome items for you to see...Thank you Michele

Mask of Choice: I'm using a template by Aquarebel315 #012. You can get it HERE.
Thank you for the Share Aqua
#95
Template of Choice: I'm using Toxic Desirez Scraps #95. Place in your mask folder.
You can get it HERE. Thanks Kristin

No Filters Used

Font for name is Snappy Sript Light and copy write is always done in Pixelette ...
Get them HERE

Dropshadow use througout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.

LET'S BEGIN

Open template/shiftD/close original template.Remove background and credits.Close
out every layer. Choose paper of choice/paste underneath all layers. Go to layers/ load/save mask/load mask from disk/find your mask of choice and paste with these
setting.merge group.

Leave doodle layer as is...

activate top bg.Copy/paste paper of choice.go to selection/ invert top bg layer and then go to paper layer and delete/ merge down.

activate circle layer/Copy/paste paper of choice/go to selection/ invert circle
layer and then go to paper layer and delete/ Keep activated
copy/paste closeup tube on top of circle layer
go to circle layer then selections/invert/then to tube layer and delete/add drop shadow

Activate star layer /copy/paste paper of choice. go to star layer/ then selections/invert go to paper layer and delete./merge down and add drop shadow

activate word art layer/copy/paste paper of choice/go to word art layer/delete/keep activated
new raster layer underneath word art layer/flood fill with color to match tag to bring out
the word art/add drop shadow

add main tube and add drop shadow.add any elements you wish to use/make sure you
add a drop shadow to each element.

Love Song

2011-08-13T03:39:00.001-04:00

This tutorial was written on August 11th 2011.

Any similarities to another tutorial

is purely coincidental.

All my tutorial are register with My Free Copyright.

Please do not claim as your own.

This tutorial writer assumes you have a

working knowledge of using Paint Shop Pro.

This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other

Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Authur Crowe..

You can purchase his tubes HERE...

Please do not use without a license to do so

Scrapkit of Choice: I am using a Broken Sky Designs

PTU Scrapkit-Love Song.

You can download it HERE....Thank you Tonya

Template of Choice: I'm using a template by

Pixelberry called Spin. You can get it HERE.

Thank you for the Share

Mask of Choice: I'm using Gems Mask #126.

Place in your mask folder.

You can get it HERE. Thanks

Filter Used:Eye Candy 4000 Swirl...

You can get it HERE

Font for name is Saginaw and

copy write is always done in Pixelette ...

Get them HERE

Dropshadow use througout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination

and make the tag your own

you do not have to use any of the supplies I used.

LET'S BEGIN

Open template/shiftD/close original template.

Remove background and credits.Close

out every layer. Choose paper of choice/

paste underneath all layers. Go to layers/

load/save mask/load mask from disk/find

your mask of choice and paste with these

setting.merge group.

Change the color of the Twirl layer to match your kit.

Add a drop shadow.

activate top bg.Copy/paste paper of choice.

go to selection/ invert top bg

layer and then go to paper layer

and delete/ merge down.

activate long bg and bottom bk. Copy/paste paper of choice

.go to selection/ invert top bglayer and then

go to paper layer and delete.make

sure you merge down after each delete.

On top bk/activate and place part of tube you want showing.

go to selection/ invert top bk layer and then go to tube

layer and delete/ duplicate tube/on 1st layer/go

to blend mode and click screen/

leave duplicated layer as is and place underneath 1st layer

add drop shadow to duplicate layer...

leave top frame as is,just add drop shadow.

Do the same process with bottom background/

with different section of tube and mirror tube so it's

in the opposite direction/ chang the

blend mode to hard light on tube.add drop shadow.

leave frame as is and add drop shadow.

leave long backgound as is/just add drop shadow

to frame,cuz you will add elements in a little bit.

Change word art color to match your tag.

add any elements you wish to use/make

sure you add a drop shadow to each element.

place your main tube where you want it/

add drop shadow.(see my tag if needed)

Add your copyright and watermark-

(I put a slight gradient glow on mine)

and give your tag to a friend

thank you for trying my tutorial..please send

me a copy of what you did

so I can showcase it...riggsbee53@gmail.com

My World So Empty

2011-08-13T03:11:00.003-04:00

This tutorial was written on August 11th 2011.

Any similarities to another tutorial is purely coincidental.

All my tutorial are register with My Free Copyright.

Please do not claim as your own.

This tutorial writer assumes you have a working

knowledge of using Paint Shop Pro.

This tutorial was done in Paint Shop Pro9,but can be

adapted to use in other Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome
artwork of Zindy Neilsen.

You will need at least four tubes

You can purchase her tubes HERE...

Please do not use without a license to do so

Scrapkit of Choice: I am using a Broken Sky Designs
PTU Scrapkit-IABY.

You can download it HERE....Thank you Tonya

Template of Choice: I'm using a template by Design by Ali #180.

Sorry Ali is no longer doing scrap and all her stuff is gone.

.please use another template..We'll miss you Ali.

Mask of Choice: I'm using EBD Mask #53.
Place in your mask folder.

You can get it HERE. Thanks

Filter Used:Eye Candy 4000 Gradient Glow...
You can get it HERE

Font for name is Bella Donna and
copy write is always done in Pixelette

Get them HERE

Dropshadow use througout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag

your own you do not have to use any of the supplies I used.

LET'S BEGIN

Open template/shiftD/close original template.
Remove background and credits.

Close out every layer.
Choose paper of choice/paste underneath all layers.

Go to layers/load/save mask/load mask from disk/

find your mask of choice and paste with these setting.

merge group.

activate rectangle layer/copy/paste paper of choice.
go to selection/ invert rectangle layer
and then go to paper layer

and delete/ merge down/add drop shadow

activate each circle layer one at a time/
copy/paste paper of choice/

go to selection/ invert circle layer
and then go to paper layer and delete.

make sure you merge down after each delete/

add drop shadow on each circle layer.

On large circles layer/activate each color group layer/

copy/paste paper of choice/

go to selection/invert that group layer and

then go to paper layer and delete/

now repeat prcess with the nest group color/

leave black circles as they are.

add drop shadow to circles layer.

leave white bows alone.

Do the same process with the three
square layers one at a time.

once each square is papered activate top square

and place your first tube where you want it.

go to selection/invert that square layer

and then go to tube layer and delete/

do thesame process with the middle square and bottom

square using a different tube each time.

leave frame for each square as is.

paper or color you star layers one at a time with the

above process.Type out the words My World So Empty

or saying of your choosing/
place at top of tag or wherever you'd like.

add any elements you wish to use/

make sure you add a drop shadow to each element.

place your main tube where you want it/

add drop shadow.(see my tag if needed)

Add your copyright and watermark-

(I put a slight gradient glow on mine)

and give your tag to a friend

thank you for trying my tutorial..please send me a copy

of what you did so I can showcase it...

riggsbee53@gmail.com

Fabulous

2011-07-22T12:01:00.001-04:00

This tutorial was written on July 21th 2011.

Any similarities to another tutorial is purely coincidental.

All my tutorial are register with My Free Copyright.

Please do not claim as your own.

This tutorial writer assumes you have a working knowledge of using

Paint Shop Pro.

This tutorial was done in Paint Shop Pro9,but can be adapted to use in other

Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork ofarthur Crowe ..You can purchase

his tubes HERE...Please do not use without a license to do so

Scrapkit Elements of Choice: I am using a Broken Sky Designs PTU Scrapkit-

Dirty Minds. You can purchase it at any one of her stores HERE....Thank you Tonya

Template of Choice: I'm using a template by VixPSP #32. You can get it HERE.

Thank you Vix for the Share

Font for name is Arbuckle Inline NF and copy write is always done in Pixelette ...

Get them HERE

Filter Used: Toadies Blast' em...You can get it HERE

Dropshadow use througout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own

you do not have to use any of the supplies I used.

LET'S BEGIN

Open template/shiftD/close original template.Remove background and credits.Close

out every layer. Choose paper of choice/paste underneath sparkles mask. Go to layers/

load/save mask/load mask from disk/find your mask of choice and paste with these setting.

merge group.

on black rectangle layer/selections float/defloat. Copy/paste paper of choice/resize if

needed.Go to rectangle layer/selection/invert and then go to paper layer and delete.Merge

down. Repeat this process with star layer,frame right and frame left.

leave fill left and fill right as is/with your closeup tube,place it at the part you want

to show.selections/invert/tube layer/delete

now duplicate and mirror/blend mode screen on both closeup/merge down add drop shadow.

place your main tube where you want it/duplicate the tube and close copy layer

now on the main tube go to Toadies Blast'em with these setting

Open up copy tube and align on top of blast em' tube.(see my tag if needed)

Add the rest of your elements/apply drop shadow

Add your copyright and watermark and give your tag to a friend

thank you for trying my tutorial..please send me a copy of what you did

so I can showcase it...riggsbee53@gmail.com

Wicked Love

2011-07-20T22:51:00.003-04:00

This tutorial was written on July 20th 2011.

Any similarities to another tutorial is purely coincidental.

All my tutorial are register with My Free Copyright.

Please do not claim as your own.

This tutorial writer assumes you have a working knowledge of using

Paint Shop Pro.

This tutorial was done in Paint Shop Pro9,but can be adapted to use in other

Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Elias Chatzoudis ..You can purchase

her tubes HERE...Please do not use without a license to do so

Scrapkit Elements of Choice: I am using a Broken Sky Designs PTU Scrapkit-

Wicked Kind of Love. You can purchase it HERE....Thank you Tonya

Template of Choice: I'm using a template by BlissfullyBeth #81. You can get it HERE.

Thank you Beth for the Share

Font for name is Saginaw and copy write is always done in Pixelette ...

Get them HERE

Filter Used Alien Skin Xenofex2 Shatter. you can get it HERE

Dropshadow use througout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own

you do not have to use any of the supplies I used.

LET'S BEGIN

Open template/shiftD/close original template.Remove background and credits.Close

out every layer. Choose paper of choice/paste underneath layer3. Go to layers/

load/save mask/load mask from disk/find your mask of choice and paste with these setting

merge group.

on layers 1,2 and 3 selections float/defloat. Copy/paste paper of choice/resize if

needed.Go to layer 1/selection/invert and then go to paper layer and delete.Merge

down. Repeat this process with layer 2 and 3.

activate gray rect frame/copy/paste paper of choice/go to selection/ invert and

then go to paper layer and delete/ merge down.keep activated/with your closeup

tube,place it at the part you want to show.selections/invert/tube layer/delete

now duplicate and mirror/lower opacity to 60/merge down add drop shadow.

Activate black frame/copy/paste paper of choice/resize/go to selections/invert

and now go to paper layer and delete/merge down

place your main tube where you want it/duplicate the tube and close copy layer

now on the main tube go to Alien Skin Xenofex2 Shatter with these setting

Open up copy tube and align on top of shatter tube.(see my tag if needed)

Add the rest of your elements/apply drop shadow

Add your copyright and watermark-(I put a slight gradient glow on mine)

and give your tag to a friend

thank you for trying my tutorial..please send me a copy of what you did

so I can showcase it...riggsbee53@gmail.com

My Love Has Fallen

2011-07-19T21:34:00.003-04:00

This tutorial was written on July 18th 2011.

Any similarities to another tutorial is purely coincidental.

All my tutorial are register with My Free Copyright.

Please do not claim as your own.

This tutorial writer assumes you have a working knowledge of using

Paint Shop Pro.

This tutorial was done in Paint Shop Pro9,but can be adapted to use in other

Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Zindy Neilsen..You can purchase

her tubes HERE...Please do not use without a license to do so

Scrapkit of Choice: I am using a PTU Fallen scrapkit from Sarah Hungry Hills

You can purchase it HERE or HERE....Thank you Sarah

Template of Choice: I'm using one of Aquarebel315 templates #22.

You can get it HERE...Thank you Aqua

Mask of choice: I'm using Insatiable Dream #37 You can get it from HERE..

thank you Cat awesome masks

Font for name is Black Night and copy write is always done in Pixelette ...

Get them HERE

Dropshadow use througout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own

you do not have to use any of the supplies I used.

LET'S BEGIN

open up template...go to image and resize cavas with following setting below

we will resize later...this is just to give you more room to work.

delete background layer/copy/paster paper of choice/resize to fit canvas/go to

layers load/save mask/load mask from disk and choose mask with these setting

go to layer/merge group/lower opacity to 54/copy/paste music sheet on top

of mask/mirror/lower opacity to 50

close all layers except raster1/activate layer/copy/paste paper of choice/resize/

go to layer 1/selection/invert/now go to paper layer and delete

do this with all copy layers

open raster2/activate layer/copy/paste paper of choice/resize/

go to layer 2/selection/invert/now go to paper layer and delete

on frame layer I chose a frame from the kit/just copy/resize and merge down

now add your tube of choice/put between the paper layer and frame layer

resize and place whereyou like it to be/duplicate and close layer

now on the original layer erase all areas outside the frame/add drop shadow

open the duplicate layer and erase all excess above the frame,but be careful

and do not erase the elbow or the head (see my tag).

add any elements to your tag/add drop shadow to all elements

I did not use the brackets/resize your tag if needed and your done

Forum Tag

the forum tag is a miniture of the tag.
sizing is 600x200
make sure you sharpen everything
after resizing so you can see it clearly
please make the tag.
DO NOT TRY TO
RESIZE THE ORIGINAL TAG

The Avatar
open up new raster layer 160x160.Chose a paper of choice.
resize until it fits in layer.
now copy and paste your closeup of just the head
add any element of choice/add drop shadow to element

layers/merge flatten/go to image/add border with these setting/click ok
now go back and repeat but change color to white and all for boxes to 2/click ok
now duplicate 2x for three layer..click on white border with magic wand
floodfill 2ith color from paper
on main layer go to adjust/add/remove noise with these setting

on second layer change noise to 75 and third layer to 85/deselect.
add copyright and license number and first letter of name

To animate

Add your watermark and copyright and give your set to a friend.

thank you for trying my tutorial..please send me a copy of what you did

so I can showcase it...riggsbee53@gmail.com

Fallen

2011-07-19T14:56:00.003-04:00

This tutorial was written on July 18th 2011.

Any similarities to another tutorial is purely coincidental.

All my tutorial are register with My Free Copyright.

Please do not claim as your own.

This tutorial writer assumes you have a working knowledge of using

Paint Shop Pro.

This tutorial was done in Paint Shop Pro9,but can be adapted to use in other

Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Zindy Neilsen..

You can purchase her tubes HERE...Please do not use without a license to do so

Scrapkit of Choice: I am using a PTU Fallen scrapkit from Sarah Hungry Hills

You can purchase it HERE or HERE....Thank you Sarah

Mask of choice: I'm using Christmas mask2 from Sabre. You can get it from

Creative Misfits Blog HERE..thanks Sabre

Font for name is TKDoodle and copy write is always done in Pixelette ...

Get them HERE

Dropshadow use througout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own

you do not have to use any of the supplies I used...This is a simple one using

a cluster frame.

LET'S BEGIN

open up cluster frame. go to image and resize cavas with following setting below

we will resize later...this is just to give you more room to work.

add raster layer/close off frame layer/copy/paster paper of choice/go to layers

load/save mask/load mask from disk and choose mask with these setting

go to layer/merge group

with magic wand click on the inside of the frame/selections/modify/expand by 10

open and paste paper of choice/go to frame layer/selections/invert

now go to paper layer and delete/move paper layer underneath frame layer

open up your tube of choice and copy/paste on top of frame/resize if needed

now place between frame and paper layer.add any elements you wish to use.

add drop shadow to each element/Once you're finish decorating your tag

use your crop tool to crop your tag.

Add your watermark and copyright and give your tag to a friend.

thank you for trying my tutorial..please send me a copy of what you did

so I can showcase it...riggsbee53@gmail.com

Pink Punk 2 pc. Forum Set

2011-07-16T04:31:00.002-04:00

This tutorial was written on July 14th 2011.

Any similarities to another tutorial is purely coincidental.

All my tutorial are register with My Free Copyright.

Please do not claim as your own.

This tutorial writer assumes you have a working knowledge of using

Paint Shop Pro.

This tutorial was done in Paint Shop Pro9,but can be adapted to use in other

Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Myka Jelina..You can purchase

her tubes HERE...Please do not use without a license to do so

Scrapkit Elements of Choice: I am using a Exclusive Misfit scrapkit from Additive Pleasures

You can download it HERE....Thank you Tammy

Font for name is Bensch Gothic and copy write is always done in Pixelette ...

Get them HERE

Dropshadow use througout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own

you do not have to use any of the supplies I used.

LET'S BEGIN

For banner

Open Up A new Raster layer 600 x 200 / 72dpi

Choose two colors from your tube of choice...now go to color pallet and click

follow these setting.

Change your color pallet to black/fa6fe2 go to present with these setting

Open new raster layer and flood fill with gradient color/lower Opacity to 50%

now copy and paste your closeup on right side...look at my tag for reference

duplicate and close off copy layer...on main tube layer change blend mode to

screen and lower opacity to 50%...on copy layer change blend mode to soft

light and lower opacity to 50%

now copy and paste smaller close up on left side..check my tag for placement

go to color pallet with top black and bottom the same pink/go to present with

same setting and draw out a smaller rectangle..see my tag

add any element of choice/add drop shadow to each element

layers/merge flatten/go to image/add border with these setting/click ok

now go back and repeat but change color to black and all for boxes to 2/click ok

now duplicate 2x for three layer..click on pink border with magic wand

on main layer go to adjust/add/remove noise with these setting

on second layer change noise to 75 and third layer to 85/deselect.

Add your water mark and copyright closed this we will animate in a bit.

for avatar

open up a new raster layer 150x150 / 72dpi

flood fill with your gradient color that you used in your banner

Change your color pallet to black/fa6fe2 go to present with same setting as above.

now copy and paste your closeup of just the head/duplicate and close this layer

on the main layer change blend mode to screen and lower opacity to 50

on the duplicated layer change opacity to 50

add any element of choice/add drop shadow to each element

layers/merge flatten/go to image/add border with these setting/click ok

now go back and repeat but change color to black and all for boxes to 2/click ok

now duplicate 2x for three layer..click on pink border with magoc wand

on main layer go to adjust/add/remove noise with these setting

on second layer change noise to 75 and third layer to 85/deselect.

add copyright and license number and first letter of name

To animate

you with animate both banner and avatar the same way

close 2nd and 3rd layer and copy merge all other layers

take to animation shop and paste as new layer

go back to PSP and close 1st layer and open 2nd layer

copy merge and take to animation shop and edit/paste after current frame

go back and close 2nd layer and open 3rd layer and copy merge

go to animation shop and edit/paste after current frame

Now edit/select all and save as gif

thank you for trying my tutorial..please send me a copy of what you did

so I can showcase it...riggsbee53@gmail.com

Who Dat Girl

2011-07-15T01:05:00.001-04:00

This tutorial was written on July 13th 2011.

Any similarities to another tutorial

is purely coincidental.

All my tutorial are register with My Free Copyright.

Please do not claim as your own.

This tutorial writer assumes you have a working knowledge of using

Paint Shop Pro.

This tutorial was done in Paint Shop Pro9, but can be adapted to use in other

Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Ismael Rac..You can purchase

his tubes HERE...Please do not use without a license to do so

Scrapkit of Choice: I am using a FTU kit from Bel Vidotti Scraps called Alone

Her site is no longer available, please use another kit....Thank you Bel

Templete of Choice: I am using AquaRebel315 Who Dat Girl.

You can download it HERE...Thank you again Aqua

Mask of Choice: I'm using one of AquaRebel315 #013...You can find it HERE

Put mask in mask folder..Thanks so much for the use of your mask Aqua

Filters used: Xero Fritillary,Screenwork - Lace Screen

Font for name is Twilight New Moon and copy write is always done in Pixelette ...

Get them HERE

Dropshadow use througout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own

you do not have to use any of the supplies I used.

LET'S BEGIN

Open Up template and duplicate. Close original and go to copy. Remove credit layer.

Close of all layers but the background layer...

Choose a paper of choice/copy/paste and resize to fit layer...now go to layers/load/

save mask/load mask from disk/ and find your mask of choice

...with these setting see photo below

....go to layers/merge group

activate 1st circle layer/copy/paste/resize paper of choice.go to circle layer

and invert, then go to paper layer and delete/keep activated

go to adjust/add-remove noise/add noise with these setting...Do this twice/deactivate

Do this twice/deactivate....add drop shadow

leave layer 2 as is...on layer 3/activate/ Choose a paper of choice/copy/paste and

resize to fit layer/ go to circle layer and invert, then go to paper layer and

delete/keep activated/go to effect screenworks/and click on lace screen/merge down

Keep activated/choose your close up tube and paste on top of layer 3/resize if need

or the way you want it and hit delete/go to Xero fritillery and apply these setting

deactivate.add drop shadow to tube.

leave layer4 and copy of layer4 as is.on layer5 and copy of layer5, repeat the same

process as you did with the circle layer...also repeat process of placing your closeup

tube where you want it.On the left tube I added screen blend mode and the right tube

I added blend mode lighten/add drop shadow to layer4 and copy layer4

On layer6 copy/paste paper of choice/go to rectangle layer and invert,then go to paper

layer and delete/merge down/add drop shadow.leave layers 7,8 and 9 as is..

I just moved them to suit my tag.

Now add whatever elements you want and add drop shadow to each one.

Add you main tube and give a drop shadow.

Add your water mark and copyright and give to a friend

thank you for trying my tutorial..please send me a copy of what you did

so I can showcase it...riggsbee53@gmail.com

Shut Up

2011-07-15T00:37:00.001-04:00

This tutorial was written on July 12th 2011.

Any similarities to another tutorial

is purely coincidental.

All my tutorial are register with My Free Copyright.

Please do not claim as your own.

This tutorial writer assumes you have a working knowledge of using

Paint Shop Pro.

This tutorial was done in Paint Shop Pro9, but can be adapted to use in other

Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of PinUpToons..You can purchase

his tubes HERE...Please do not use without a license to do so

Scrapkit of Choice: I am using a FTU kit from Beas Creations called Shut Up

You can download it HERE....Thank you Bea

Mask of Choice: I'm using one of Insatiable Dreams 591...You can find it HERE

Put mask in mask folder..Thanks so much for the use of your mask Cat

Filters used: None

Font for name is Haunted Mouse Shadow and copy write is always done in Pixelette ...

Get them HERE

Dropshadow use througout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own

you do not have to use any of the supplies I used.

LET'S BEGIN

Open Up A new Raster layer 650 x 700 72dpi

Choose a paper of choice/copy/paste...now go to layers/Load/

save mask/load mask from disk/ and find your mask of choice...

with these setting see photo below....

go to layers/merge group

Open glitter2 and copy'paste on top of mask layer

Resize and place where you want it

duplicate and mirror and merge down

copy/paste wire 2 and resize.this goes on top of glitter

open up frame 3 and copy/paste as a new layer.resiz

/now take magic wand and click

inside frame/selection /modify/expand by 10/keep activated

now select paper of choice and paste on top of frame layer. Resize/ go to frame layer

and invert, then go to paper layer and delete/keep actvated

copy/paste wordart and resize to fit frame/ go to frame layer and invert, then go

to paper layer and delete/keep actvated

Choose your tube and copy/paste...resize and go to frame layer and invert, then go

to paper layer and delete/click on layer and click screen/keep activated

Now copy/paste ribbon 3 on top of tube layer/resize/go to frame layer and invert,

then go to paper layer and delete/ deactivate

Now decorate your tag with elements of choice/add drop shadow on all elements

add your main tube/ resize if needed and place where you want it/add drop shadow

Add your water mark and copyright and give to a friend

thank you for trying my tutorial..please send me a copy of what you did

so I can showcase it...riggsbee53@gmail.com

I'm A Fly Chick

2011-07-15T00:19:00.002-04:00

This tutorial was written on July 12th 2011. Any similarities to another tutorials purely coincidental.

All my tutorial are register with My Free Copyright. Please do not claim as your own.

This tutorial writer assumes you have a working knowledge of using Paint Shop Pro.

This tutorial was done in Paint Shop Pro9, but can be adapted to use in other Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Zlata M..You can purchase her tubes HERE

Please do not use without a license to do so

Scrapkit or colors of your choice...I'm using Designs by Vabs Brattitude

you can get it HERE...thanks Vabs

Mask of Choice: I'm using one of Insatiable Dreams 434...You can find it HERE

Put mask in mask folder..Thanks so much for the use of your mask Cat

Template of Choice: I am using one of AquaRebel315-Template56..you can get it HERE...Thanks Aqua

Filters used: Xero- Porcelaid , Radiance and Fritillary...Please Google for this.

Font for name is MV Boli and copy write is always done in Pixelette ... Get them HERE

Drop shadow use throughout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

There's a lot of parts to this template, but I will try to make it simple for you,

my tag is just a guide...please use your imagination

and make the tag your own you do not have to use any of the supplies

I used, but please use the template

LET'S BEGIN

Open up Template and ShiftD and close original...delete copyright layer

close all layers except the background layer...the one we'll be working on

Choose a paper of choice/copy/paste...now go to layers/Load/

save mask/load mask from disk/ and find your mask of choice...with these setting

(see photo below)....

go to layers/merge group

I left the two blk circles and 2 white circles as is...on the blues circles

I used a paper..activate the first blue circle and copy/paste paper of choice.

resize paper/invert circle layer and then delete paper layer/merge down

...add drop shadow to circle layer

Now repeat this process for the second blue circle.

leave the 2 blk and white stars as is...on the 2 blue stars use a paper of choice.

repeat the same process as you did with the blue circles/don't forget to merge

down and add drop shadow

leave big circle 1 and 2 as is... On bigh circle 3 choose another paper of choice

and repeat the process again as with the small blue circles.keep circle activated

and go to xero-frittllery with the setting below.

With circle 3 still activate take your tube and place on top of circle. make the closeup

as large as you want it...Go to the circle layer and invert/then go to the tube layer
and delete/add drop shadow.leave pixie text layer as is.

leave rectagle 1 and 2 as is....On rectangle 3 activate and paste paper of choice/resize

go to rectangle 3 and select invert and go to paper layer and delete. add drop shadow

on rectangle2 activate and copy/paste your tube but just the face. duplicate and mirror

on the first left face layer go to xero radiance and use these setting:

now click on layer and click screen.

on the right face layer duplicate mirror and close. Now on the right face go to

xero porcelain and use these setting:

now click on layer and click screen.

change the color of the wordart to match your tag

now add any element you would like to make you tag reflect a fly chick

I put the speaker on the left circle and place the third face closeup inside.

Now on the face go to xero porcelain and use same setting as above

now click on layer and click screen.

make sure you add drop shadow to your elements.

add your main tube in the middle of the two faces...add drop shadow

Add your water mark and copyright and give to a friend

thank you for trying my tutorial..please send me a copy of what you did

so I can showcase it...riggsbee53@gmail.com

Warning Crack Shot

2011-06-19T22:47:00.000-04:00

This tutorial was written on June 19th 2011.

Any similarities to another tutorialis purely coincidental.

All my tutorial are register with My Free Copyright. Please do not claim as your own.

This tutorial writer assumes you have a working knowledge of using

Paint Shop Pro.

This tutorial was done in Paint Shop Pro9,but can be adapted to use in other

Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Legends Art..

You can purchase her tubes HERE

Please do not use without a license to do so

Scrapkit or colors of your choice...I'm using Sarah Hungry Hills PTU Crack Pot

you can get it here (digifoxstudios) or

here (wilmer4ever)...thank you Sarah

Mask of Choice: I'm using one of zuzzanaz mask07...You can find it HERE

Put mask in mask folder..Thanks so much for the use of your mask

Template of Choice: I am using one of Melissaz Creationz 30-Template148..

you can get it HERE...Thanks Melissa

Filters used Xero Radiance and Porcelaine..get them HERE

Font for name is Edge and copy write is always done in Pixelette ...

Get them HERE

Dropshadow use througout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

LET'S BEGIN

Open up Template and ShiftD and close original...delete copyright layer

close all layers except the background layer...the one we'll be working on

Choose a paper of choice/copy/paste...now go to layers/Load/save mask/

load mask from disk/ and find your mask of choice...with these setting

see photo below....go to layers/merge group

add element wire on top of mask layer/duplicate and mirror/resize if you

want/merge down and add drop shadow

activate oval layer/selection/modify/expand by 1 choose a paper/

copy and paste as a new layer/resize/click on oval layer and invert...then

go back to the paper layer and click delete...merge down

Open up your layer1...activate all edges and add color of choice from scrap kit

now activate the square on layer1 and add paper of choice/resize

invert square layer and then delete paper layer...add drop shadow to layer1

go to wordart layer and separate the top wordart from the bottom wordart

you should have two wordart layers now...activate the top wordart that

says "warning" and add a color of choice...add drop shadow

leave bottom wordart layer as is and add a drop shadow

activate the right square/copy and paste the part of your tube that you

want showing/resize until the part fit in the square...now go to the

right square layer and invert/on tube layer delete/merge down

activate right square frame layer and add color of choice/add drop shadow

repeat the same process with center square and frame and left square

and frame.

on the right and left tube add porcelain with these setting

after creating the center square...add radiance with these setting

add what elements you want from the kit and make your tag special...

don't forget to add drop shadow to each element/now add your main tube

where you want it and add a drop shadow

Add your copyright and watermark..and give to a friend

You're done!!!

Thanks for trying my tutorial

If you use send me a copy so I can show case it...thanks

Drama Bitches 3pc Forum Set

2011-06-11T02:58:00.006-04:00

Here's a three piece forum set made with Hungry Hills collab

from Digifox Studio called Drama Bitches

This tutorial was written on June 7th 2011.

Any similarities to another tutorial is purely coincidental.

All my tutorial are register with My Free Copyright. Please do not claim as your own.

This tutorial writer assumes you have a working knowledge of using Paint Shop Pro.

This tutorial was done in Paint Shop Pro9,but can be adapted to use in other Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Very Many..You can purchase her tubes HERE

I used three different ones.Please do not use without a license to do so

Scrapkit or colors of your choice...I'm using PTU Drama Bitches-by Sarah Hungry Hills

you can purchase it HERE...thank you Sarah

Mask of Choice: I'm using one of Weescotslass #21...You can find it HERE

Put mask in mask folder..Thanks so much for the use of your mask Chell

Template of Choice: I am using one of Melissaz Creationz-Template #85.

you can get it HERE...Thanks Melissaz

Filters Used-Mura Meister-Copies - Xero-Radiance.-DSB Flux-Bright Noise
please google for these

Font for name is Dotum,BoogieNightsNF and copy write is always done in Pixelette ...

Get them HERE

Dropshadow use througout H-2/V--2/O-50/B-7.00

Please leave a thank you when downloading for supplies.

LET'S BEGIN

Main Tag

Open up Template and ShiftD and close original...delete copyright layer

close all layers...add a new layer and put underneath the circle layer

this will be the background layer...the one we'll be working on

Choose a paper of choice/copy/paste...now go to layers/Load/

save mask/load mask from disk/ and find your mask of choice...with these setting

see photo below....go to layers/merge group

select the word art paper and copy/paste beneath mask layer...resize to fit

now duplicate and close...on the first layer go to image/rotate/free rotate

by 15 to the right...open duplicate layer and rotate to left by 15...merge

down and give it a drop shadow.

Before starting on the template rename each layer starting at the bottom

it will make it easier

activate each layer separtely with these directions below:

selection/modify/expand by 1 choose a paper/

copy and paste as a new layer/resize/click on each layer and invert...then

go back to the paper layer and click delete...merge down. add drop shadow

to all layers

Now you can either add your elements as you go along on each layer or wait

until you finish doing each layer to design your tag..I added elements as

I went along, it was easier for me

on the circle layer I added a paper and a button

on the rectangle layer I added a paper and added the words drama bitches

using the font dotum size 12 stoke 1/type out drama bitches/convert to raster

/objects/align/center/activate the rectangle/now on wordart layer

go to effect mura meister/copies with these setting/then merge down

on the rectangle frame I use a glitter paper/selection/float/defloat

copy/paste paper/resize/on frame layer/selection/invert/go to paper

layer and delete/give rectangle a drop shadow

active middle square/copy/paste paper/add close up of the face of your main

tube/apply luminace lagacy to the tube

active middle square frame and copy/paste a glitter paper

repeat process with the top and bottom sqaure using a different tube of

close up tube/apply xero/radiance using these setting below/add drop

shadow to tube

on star layer active and add color to each star/adjust add/remove noise

with these setting

Now add your main tube where you would like it to be/resize/sharpen

and add drop shadow

add more elements if you desire...don't forget to add drop shadow

add copyright and watermark ...save a png

Forum Tag

now the forum tag is a minature of the tag...the forum tag is just like the

tag only smaller so make sure you resize everything to fit....it's better to

resize as you go because it will look clearer than just resizing the original

tag..so make the forum tag from scatch just like the tag...

forum tag is 600x200

for the animation of the background...duplicated the word paper

2x...on the bottom layer...take your magic wand and click on

some of the green,and red squares...also the blue writing

go to dbs flux with these setting

Avatar

For the avatar...open new layer 150x150...
I just used the wordart paper and the square middle frame
and add a element if you want to/add copyright
merge flatten and go to image /add borders with these setting

activate the border and add a color from your tube

duplicate 2x and close top two layers...use the same dsb flux

setting as above on all three layers and save in animation

shop the same way...save as gif

You're done!!!

Thanks for trying my tutorial

If you use send me a copy so I can show case it...thanks

on the next layer change to 35

on the last layer change to 45

When you save close the 2nd and 3rd layer/copy merge/paste

into animation shop

...now go back and close 1st layer

and open 2nd layer and copy merge/paste behind 1st layer

in animation shop...go back and close 2nd layer and open 3rd layer

copy merge/paste in animation shop behind 2nd layer in animation shop.

Save as gif

Steam Punk Lost

2011-02-19T16:10:00.002-05:00

This tutorial was written on February 18th 2011.

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. Please do not claim as your own.
This tutorial writer assumes you have a working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Myka Jelina..You can purchase her tubes HERE
Please do not use without a license to do so

Scrapkit of your choice...I'm using Steampunked-by Designz by Vaybs... her mask #121

and her template #0410
you can get it all HERE...thank you Vaybs

Your Work Is Awesome

Font for name is Kingthings Pique'n'meex and copy write is always done in Pixelette ... Get them HERE

Drop shadow use throughout H-2/V-2/O-50/B-5.00

Please leave a thank you when downloading for supplies.It only takes a minute.

LET'S BEGIN

Open up Template and ShiftD and close original...delete copyright layer
close all layers except the background layer...the one we'll be working on

Choose a paper of choice/copy/paste...now go to layers/Load/
save mask/load mask from disk/ and find your mask of choice...with these setting
see photo below....

go to layers/merge group

Before starting on the template rename each layer starting at the bottom excluding
the backgr layer...It will make it easier on what is papered and what is colored.
leave the word art layers as is.....

activate each layer separtely with these directions below:

selection/modify/expand by 1 choose a paper/
copy and paste as a new layer/resize/click on each layer and invert...then
go back to the paper layer and click delete...merge down. add drop shadow to all layers

Leave layer 2 as is/on layer 5 I used color #5a3409/on layer 7 & 8 I used color #2a2108

Now you can either add your elements as you go along on each layer or wait until you finish
doing each layer to design your tag

I added an element to layers 1-5-8 and 9...Make sure you add a drop shadow on all elements
as you go along.
Now add your tubes where you would like them to be/resize/sharpen and add drop shadow
add more elements if you desire...don't forget to add drop shadow

Forum Tag

now the forum tag is a miniature of the tag...the forum tag is just like the tag only
smaller so make sure you resize everything to fit....it's better to resize as you go
because it will look clearer than just resizing the original tag..so make the forum
tag from scratch just like the tag...forum tag is 600x200

Avatar

For the avatar I just used a back ground paper and the two tubes from the tag
and added an element to it...avatar is 150x150

Add your copyright and watermark..and give to a friend

You're done!!!
Thanks for trying my tutorial
If you use send me a copy so I can show case it...thanks

Deck The Halls

2010-12-08T17:44:00.004-05:00

Deck The Halls

This tutorial was written on November 22nd 2010. Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. Please do not claim as your own.
This tutorial writer assumes you have a working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Celine..This was a free Christmas Gift from MPT...You can purchase her tubes HERE
Please do not use without a license to do so

Scrapkit or colors of your choice...I'm using Sarah Hungry Hills PTU Deck The Halls
you can get it HERE...thank you Sarah

Mask of Choice: I'm using one of WSL #118...You can find it HERE
Put mask in mask folder..Thanks so much for the use of your mask Chelle

Template of Choice: I am using one of Denz Designz-Template165..

you can get it HERE...Thanks Denny

Font for name is Chase Callas SH and copy write is always done in Pixelette ... Get them HERE

Drop shadow use througout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

LET'S BEGIN
Open up Template and ShiftD and close original...delete copyright layer
close all layers except the background layer...the one we'll be working on

Choose a paper of choice(I chose paper #3)/copy/paste...now go to layers/Load/
save mask/load mask from disk/ and find your mask of choice...with these setting
see photo below....

go to layers/merge group/resize by 80%

activate each layer separately with these directions below

selection/modify/expand by 1 choose a paper/
copy and paste as a new layer/resize/click on each layer and invert...then
go back to the paper layer and click delete...merge down. add drop shadowto all layers

Open up your close up tube of choice...resize your tube and place on the square left
now sharpen if needed and add drop shadow
now add any other elements of your choosing...make your tag your own, you don't
have to make it like mine...it is only a guide...don't forget to add drop shadow on
all elements.

once finsh adding elements...add you main tube...don't forget to add drop shadow

Add your copyright and watermark..and give to a friend

You're done!!!
Thanks for trying my tutorial
If you use send me a copy so I can show case it...thanks