8/16/20

The Grass is Greener- CRM and Creative Scraps by Crys

 The Grass is Greener

This tutorial was written on August 15,2020. 

Any similarities to another tutorial is purely coincidental.

All my tutorial are register with My Free Copyright. 

Please do not claim as your own.

This tutorial writer assumes you have a working 

knowledge of using Paint Shop Pro.

This tutorial was done in Paint Shop Pro 9,

but can be adapted to use in other 

Paint Shop Pro versions.


SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Cuddly Rigor Mortis.

Please do not use unless you have a license to do so.

This tube was a bonus Tube, It is no longer Available  

Purchase Cuddly Rigor Mortis tubes HERE


Scrapkit of Choice: I am using PTU Creative Scraps by Crys Scrap IB

Cuddly Rigor Mortis Sep. 2019 BT. You can purchase it HERE 


Template of choice: I am using template 200 by Denz Designz

You can download it HERE...Thanks Denny 


Masks of Choice: I am using Rebel Dezigns Mask 83 & 124

You can download it HERE.... Thank You Gizzy


Filters used: Eye Candy 4000 gradient glow - HERE


Font for Name is Salsabella - HERE

Copy write is always done in Pixelade  HERE


Drop shadow use through out / H-4/V+4/O-60/B-6.85

Smooth Setting through out /10


Please leave a thank you when you downloading for supplies.

My tag is just a guide...please use your imagination 

and make the tag your own. You do not have to 

use any of the supplies I used.


     LET'S BEGIN

Open up Template and ShiftD and close original...resize all

layers to 800 x 800/delete  copyright layer/close all layers

copy/paste paper of choice/resize to fit canvas/layers/load

save mask/find your mask/and set with these setting/click ok

repeat with another mask of choice


On the following raster layers follow these directions...


activate blk shape 1 layer/selections/modify/smooth with setting below

invert on shape layer/copy/paste paper of choice/resize paper by 60%

delete on paper layer/merge down/add drop shadow

activate thin green rectangle layer/change color to #5b6c26/add drop shadow


activate black rectangle layer/selections/modify/smooth with setting 

above/invert on rectangle layer/copy/paste paper of choice/resize paper 

by 60%/delete on paper layer/merge down/add drop shadow


activate green shape 1 layer/selections/change color to #44591e/add drop shadow


activate black rounded rectangle layer/selections/modify/smooth with setting 

above/invert on rectangle layer/copy/paste paper of choice/resize paper 

by 60%/delete on paper layer/merge down/add drop shadow


activate white circle layer/selections/modify/smooth with setting above

invert on circle layer/copy/paste paper of choice/resize paper 

by 60%/delete on paper layer/merge down/add drop shadow/recolor frame

with #44591e


copy paste the tube /resize by if needed/place beside the frame/add drop shadow

place flower 6 underneath the frame/duplicate flower layer/blend overlay on copy

of flower/lower opacity to 90%.


add any elements you wish to use/resize if needed/add drop shadow

to each element/place where they will look best


use the word art within scrap kit or write your own word art and position 

on tag where ever it looks best to you/add gradient glow and drop shadow

delete top five layers


add your watermark and copyright credits/give it a slight gradient 

glow.....now give your tag to a friend.


You're done...thank you for trying my tutorial

please send me a copy so that I can show case it on my blog

send to.... riggsbee53@gmail.com


11/21/19

PTU Curious Creative Dreams And Very Many

Christmas Cheer

This tutorial was written on November 22,2019. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.

 

SUPPLIES NEEDED

Tube of choice: I'm using the awesome artwork of Very Many.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am featuring the scrapkit of Curious Creative
Dreams-Christmas Dreams ...You can purchase it HERE ...Thanks Stu



Mask of Choice: I am using a mask by Rebel Dezigns Mask 86
You can download this HERE  Thank You GiZZy
Mask of Choice: I am also using Spiderwebs and Moonbeams Mask 14
You can download it HERE Thank you Stacie

Filters used:Eye Candy 4000 gradient glow - HERE
Toadies - Ommadawn HERE
Penta.com-Color Dot HERE

Font for Name is Santa's Sleigh Full Deluxe
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-3/V-3/O-60/B-6.85

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up new raster layer 800x800/copy/paste element 18/resize by 70%
place in center of canvas/magic wand/click inside/selections/modify
by 10/invert on frame/copy/paste paper 10/delete on paper/keep
selected/copy paste close up tube/resize to fit the frame/delete on
tube/keep selected/duplicate tube/place on top of frame/eraser tool
erase  any extra tube at the bottom of frame/selection none/add a drop 
shadow on frame

On the bottom tube go to your plugin and select Toadies/Ommadawn
with these selections/add drop shadow



On your top tube Penta dot. com/select color dot with these selections
add drop shadow



copy/paste element 26/now comes the tricky part/depending on the color 
of your tube you may have to change the color of the elements to match
your tube. To do so go to color change tool/change to target/size 8
color all the element you want to change to the color you want/once
done then you can place element where you want on your tag
resize all element to fit your tag/don't forget to add a drop shadow

now it's time to have some fun/add all elements you wish to use/place
where they will look best on your tag/once your tag is finish you can 
place your mask underneath the tag. 
I used two masks/open paper of 
choice/ recolor paper if needed/find your mask/ I used Rebel Dezigns 86



and Spiderwebs and Moonbeams 14/with these setting



add your watermark and copyright credits/give it a slight gradient glow
now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

10/7/19

Angela Diegel-Noisey

Noisey




This tutorial was written on October 7,2019. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.


SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Angela Diegel.
Please do not use unless you have a license to do so. 
Get Her tubes HERE. For a Limited Time

Template of choice:I am using a forum style template by Spawn Templates #22
You can download it HERE...Thanks Spawn

Filters used:Eye Candy 4000 gradient glow - HERE
Xero-Porcelain - HERE

Font for Name is Stream Punk Flyer - HERE
Copy write is always done in Pixelette  HERE

Drop shadow use through out / H-5/V+5/O-60/B-7.85

Animation Shop - download HERE

Please leave a thank you when you downloading for supplies.
My tag is just a guide...please use your imagination 
and make the tag your own. You do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete 
copyright layer/close all layers/choose a color from your tube
If you choose the tube I used/my color is #2796b9/Flood
Fill main bottom layer

On the following raster layers follow these directions...

activate black line layer/choose another color from your tube
my color was #49bedf/magic wand/flood fill with the color/
duplicate this layer two times/On bottom layer/adjust/add/remove noise
with this selection/on middle layer/change noise to 55/ on top layer
change noise to 60/close top two layers

bottom of triangle back/magic wand/click inside/flood fill with this
color -d63860/copy/paste close up tube/ invert on back triangle
delete on tube layer/selection/none/duplicate tube/blend /overlay
on orignal tude layer/lower opacity to 82% on same layer/drop shadow
on both layers

Bottom triangle Line/duplicate twice/ adjust/add/remove noise at same
adjustments as before/change setting to /bottom-50/middle-55-top-60
Right triangle background/magic wand/click inside/flood fill with this
color -d63860/copy/paste close up tube/resize if needed/ invert on back 
triangle/delete on tube layer/selection/none/duplicate tube/blend /hardlight
on orignal tude layer/lower opacity to 76% on same layer/drop shadow
on both layers

Right triangle Line/duplicate twice/ adjust/add/remove noise at same
adjustments as before/change setting to /bottom-50/middle-55/top-60

Top triangle background/magic wand/click inside/flood fill with this
color -c2234c/copy/paste tube/resize if needed/ invert on back triangle
delete on tube layer/selection/none/duplicate tube/blend /screen
on orignal tude layer/lower opacity to 58% on same layer/drop shadow
on both layers

Top triangle Line/duplicate twice/ adjust/add/remove noise at same
adjustments as before/change setting to /bottom-50/middle-55/top-60

Copy/paste your main tube/resize if needed/place on the left side of
the tag/add drop shadow/resize your tag if needed/add your copyright 

To animate

Close the following layers
Black lines 2 and 3
Bottom triangle lines 2 and 3
Right triangle lines 2 and 3
Top triangle lines 2 and 3
Copy merge all other layers
take to animation shop and paste
Go back and close all first layers and open #2 layers
take to animation shop and paste after current frame
Go back and close all second layers and open #3 layers
take to animation shop and paste after current frame
edit/select all/animation/frame properties 30
save as gif

.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

9/19/19

Jennifer Janesko - Feathers

This tutorial was written on September 19,2019. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9
but can be adapted to use in other 
Paint Shop Pro versions.



Supplies

Tube: Jennifer Janesko-you will need a close up tube also
Purchase her tubes HERE
Filter: Mura Meister - Copies-Download HERE
Penta.com:VTR2/Dot and Cross-Download HERE
dsb:Blast:Download HERE
Font: Good Vibes - Download HERE

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.

Let's Begin

Open new raster 700X250
Copy/paste tube of choice
Effects filter Mura Meister with these setting



Effects pemta.com/VTR2 with these setting



Effects dsb/Blast with these setting



repeat blast effect for all directions/duplicate and close

Copy and paste closeup tube/ place on the right hand side
move tube until it's close to the eye(see my tag for placement)
duplicate/mirror/place on left hand side/move this tube
until it's close to the eye (see my tag for placement)

On right tube change blend mode to overlay/drop shadow on tube



On left tube change blend mode to hard light/lower opacity to 82%/drop shadow on tube



Open blast effect copy and move to top of left tube/blend mode screen/lower opacity to 60%
Copy/paste main tube/blend mode-screen/resize by 85% twice
copy/paste main tube again/resize by70%/resize again by 85%/place on left side of tag
pemta.com/dot and cross with these settings



duplicate/mirror/add drop shadow to both
copy main tube again/resize by 85%/add drop shadow

Find you font of Choice and type out Feathers- I used Good Vibes
Place top right of tag
add copyright and give to a friend

Thank you for trying my tutorial



8/10/18

What we Are

What we Are

This tutorial was written on August 10,2018. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.






SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Yuriko Shirou.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using PTU Honored Scraps Yuriko Shirou
Bundle #5. You can download it HERE ...Thank You Patty

Template of choice:I am using a collab template 2 from Divine Intentions
You can download it HERE...Thanks Missy

Mask of Choice: I am using MPM Mask 32
You can download it HERE.... Thank You Millie

Filters used:Eye Candy 4000 gradient glow - HERE

Animation - Rebel Dezigns - Package 100-Animation 298
Puechase Animation HERE- Thank you Gizzy


Font for Name is Precious - HERE
Copy write is always done in Pixel Operator  HERE

Dropshadow use through out / H-4/V+4/O-60/B-6.85
Smooth Setting through out 



Please leave a thank you when you downloading for supplies.
My tag is just a guide...please use your imagination 
and make the tag your own. You do not have to 
use any of the supplies I used.


 
     LET'S BEGIN

Open up Template and ShiftD and close original...delete 
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok



On the following raster layers follow these directions...

leave circle 1 layer as is/add drop shadow/activate rectangle layer
selections/modify/smooth with setting above/invert on rectangle layer
copy/paste paper of choice/resize paper/delete on paper layer/merge down
add drop shadow

activate square 1 layer/selections/modify/smooth with setting above
invert on square layer/copy/paste paper of choice/resize paper
delete on paper layer/merge down

activate square 2 layer/selections/modify/smooth with setting above
invert on square layer/copy/paste paper of choice/resize paper
delete on paper layer/merge down

activate circle 2 layer/selections/modify/smooth with setting above
invert on circle layer/copy/paste paper of choice/resize paper
delete on paper layer/merge down

activate square 3 layer/selections/modify/smooth with setting above
invert on square layer/copy/paste paper of choice/resize paper
delete on paper layer/merge down

leave square back as is/activate square 4 layer/selections/modify
smooth with setting above/invert on square layer/copy/paste paper of 
choice/resize paper/delete on paper layer/merge down

activate square 5 layer/selections/modify/smooth with setting above
invert on square layer/copy/paste paper of choice/resize paper
delete on paper layer/merge down/leave remaing frames as is

copy paste the half tube /resize by 70%/place on circle 1/activate
circle/invert/delete on tube/add drop shadow

add any elements you wish to use/resize if needed/add drop shadow
to each element/place where they will look best

copy/paste full tube/place on left side of tag/resize by 75%/add
drop shadow

chose a wordart and position on tag where ever looks best to you
add gradient glow and drop shadow

add your watermark and copyright credits/give it a slight gradient 
glow

To animate or not it's up to you

Close all layers except

Circle 2
Square 2
Square 1
Rectangle
Circle 1
mask layer

Copy/merge remaining layers/take to animation shop
look for your animation and open it/click on your tag/edit/duplicate 5 times
click on tag and duplicate 4 times/ you should now have 25 layers
on your animation/edit/select all/paste into selected frame/view animation to make sure it's correct
now go back to psp and close layers that are open and open all other layers
copy/merge and take to animation shop/paste/click on your tag/edit/duplicate 5 times
click on tag and duplicate 4 times/ you should now have 25 layers/select all/copy
pasted into selected frame/file optimization wizard/follow the setting below



click ok until end/save

.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

3/10/18

My Love Bug

Ride In My Love Bug

This tutorial was written on March 10,2018. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.



SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Marika.
Please do not use unless you have a license to do so. 
Get her tubes HERE

Mask of Choice: I am using Rebel Designz mask 7
You can download it HERE.... Thank You Gizzy

Graident of Choice: I'm using a gradient by Tonya's Temptations
CMBD14 #6 - Download HERE ...Thanks Tonya

Shape- Preset shape RA ornamental corner a by Roxanne Acevedo
You can download HERE...Thanks Roxanne

Flower of Choice: I am using Frangipani by Bluebird 
Download HERE - Thanks Bluebird

Ribbon of Choice -Ribbon made by Always Creation Download HERE

Filters used:Eye Candy 4000 gradient glow - HERE
Penta.com - Jeans - HERE
Blend-PSP-hard light

Word art by Always Creations -HERE

Font for Name and Word art is Back To Black
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-60/B-6.85

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

open up new raster layer 800x800/go to preset shapes and find preset
ornamental corner a/size x697-y491/convert to raster layer/duplicate
mirror/bring corners together/merge down/duplicate/image flip/close
both corners/you will have a frame/merge down/resize frame to your 
liking/place in center


duplicate frame/close duplicate frame/magic wand/click on black area
flood fill with a color from your tube/open duplicate frame/place
underneath main frame/move bottom frame a little to the right(see
my tag for position) add drop shadow to bottom frame



on top frame/duplicate/close this frame/magic wand/click on bottom frame
effects/texture/blinds with these setting/open top frame/blend/hard light
make sure this frame is on top/merge down/add drop shadow to both frames



new raster layer/place under frame/magic wand/click outside frame/flood
with color of choice or gradient

new raster layer/choose two colors from your tube of choice or a gradient
flood fill new layer with color layers/load/save mask/find your mask/set 
with these setting/click ok



copy/paste tube of choice/place on top of frame/resize if needed/add drop 
shadow

copy/paste tube of choice and place where it looks best to you/resize if
needed/add drop shadow/effects penta.com-jeans/ with these settings



add wordart if you wish or you can use mine 
add fat gradient glow/add drop shadow

add your watermark and copyright credits/give it a slight gradient 
glow.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog