7/22/11

PTU Broken Sky Designs and Arthur Crowe

Fabulous

This tutorial was written on July 21th 2011.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
 Please do not claim as your own.
This tutorial writer assumes you have a working knowledge of using
Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,but can be adapted to use in other
Paint Shop Pro versions.



SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Arthur Crowe ..You can purchase
his tubes HERE...Please do not use without a license to do so

Scrapkit Elements of Choice: I am using a Broken Sky Designs PTU Scrapkit-
Dirty Minds. You can purchase it at any one of her stores HERE....Thank you Tonya

Template of Choice: I'm using a template by Vix PSP #32. You can get it HERE.
Thank you Vix for the Share

Font for name is Arbuckle Inline NF and copy write is always done in Pixelette ...
Get them HERE

Filter Used: Toadies Blast' em...You can get it HERE
Dropshadow use througout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.

LET'S BEGIN

Open template/shiftD/close original template.Remove background and credits.Close
out every layer. Choose paper of choice/paste underneath sparkles mask. Go to layers/
load/save mask/load mask from disk/find your mask of choice and paste with these setting.


merge group.
on black rectangle layer/selections float/defloat. Copy/paste paper of choice/resize if
needed.Go to rectangle layer/selection/invert and then go to paper layer and delete.Merge
down. Repeat this process with star layer,frame right and frame left.
leave fill left and fill right as is/with your closeup tube,place it at the part you want
to show.selections/invert/tube layer/delete
now duplicate and mirror/blend mode screen on both closeup/merge down add drop shadow.
place your main tube where you want it/duplicate the tube and close copy layer
now on the main tube go to Toadies Blast'em with these setting


Open up copy tube and align on top of blast em' tube.(see my tag if needed)
Add the rest of your elements/apply drop shadow

Add your copyright and watermark and give your tag to a friend
thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it...riggsbee53@gmail.com

7/20/11

PTU Broken Sky Designs and Elias Chatzoudis

Wicked Love

This tutorial was written on July 20th 2011.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working knowledge of using
Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,but can be adapted to use in other
Paint Shop Pro versions.


SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Elias Chatzoudis ..You can purchase
her tubes HERE...Please do not use without a license to do so

Scrapkit Elements of Choice: I am using a Broken Sky Designs PTU Scrapkit-
Wicked Kind of Love. You can purchase it HERE....Thank you Tonya

Template of Choice: I'm using a template by BlissfullyBeth #81. You can get it HERE.
Thank you Beth for the Share

Font for name is Saginaw and copy write is always done in Pixelette ...
Get them HERE

Filter Used Alien Skin Xenofex2 Shatter. you can get it HERE

Dropshadow use througout H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.

LET'S BEGIN

Open template/shiftD/close original template.Remove background and credits.Close
out every layer. Choose paper of choice/paste underneath layer3. Go to layers/
load/save mask/load mask from disk/find your mask of choice and paste with these setting



merge group.

on layers 1,2 and 3 selections float/defloat. Copy/paste paper of choice/resize if
needed.Go to layer 1/selection/invert and then go to paper layer and delete.Merge
down. Repeat this process with layer 2 and 3.

activate gray rect frame/copy/paste paper of choice/go to selection/ invert and
then go to paper layer and delete/ merge down.keep activated/with your closeup
tube,place it at the part you want to show.selections/invert/tube layer/delete
now duplicate and mirror/lower opacity to 60/merge down add drop shadow.

Activate black frame/copy/paste paper of choice/resize/go to selections/invert
and now go to paper layer and delete/merge down
place your main tube where you want it/duplicate the tube and close copy layer
now on the main tube go to Alien Skin Xenofex2 Shatter with these setting



Open up copy tube and align on top of shatter tube.(see my tag if needed)
Add the rest of your elements/apply drop shadow

Add your copyright and watermark-(I put a slight gradient glow on mine)
and give your tag to a friend
thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it...riggsbee53@gmail.com

7/19/11

PTU Hungry Hills and Zindy Nielsen

My Love Has Fallen

This tutorial was written on July 18th 2011.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working knowledge of using
Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,but can be adapted to use in other
Paint Shop Pro versions.




SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Zindy Neilsen..You can purchase
her tubes HERE...Please do not use without a license to do so

Scrapkit of Choice: I am using a PTU Fallen scrapkit from Sarah Hungry Hills
You can purchase it HERE or HERE....Thank you Sarah

Template of Choice: I'm using one of Aquarebel315 templates #22.
You can get it HERE...Thank you Aqua

Mask of choice: I'm using Insatiable Dream #37 You can get it from HERE..
thank you Cat awesome masks

Font for name is Black Night and copy write is always done in Pixelette ...
Get them HERE

Dropshadow use througout H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.

LET'S BEGIN

open up template...go to image and resize cavas with following setting below

we will resize later...this is just to give you more room to work.

delete background layer/copy/paster paper of choice/resize to fit canvas/go to
layers load/save mask/load mask from disk and choose mask with these setting


go to layer/merge group/lower opacity to 54/copy/paste music sheet on top
of mask/mirror/lower opacity to 50

close all layers except raster1/activate layer/copy/paste paper of choice/resize/
go to layer 1/selection/invert/now go to paper layer and delete
do this with all copy layers

open raster2/activate layer/copy/paste paper of choice/resize/
go to layer 2/selection/invert/now go to paper layer and delete
on frame layer I chose a frame from the kit/just copy/resize and merge down

now add your tube of choice/put between the paper layer and frame layer
resize and place whereyou like it to be/duplicate and close layer

now on the original layer erase all areas outside the frame/add drop shadow
open the duplicate layer and erase all excess above the frame,but be careful
and do not erase the elbow or the head (see my tag).

add any elements to your tag/add drop shadow to all elements
I did not use the brackets/resize your tag if needed and your done

Forum Tag



the forum tag is a miniture of the tag.
sizing is 600x200
make sure you sharpen everything
after resizing so you can see it clearly
please make the tag.
DO NOT TRY TO
RESIZE THE ORIGINAL TAG

The Avatar
open up new raster layer 160x160.Chose a paper of choice.
resize until it fits in layer.
now copy and paste your closeup of just the head
add any element of choice/add drop shadow to element



layers/merge flatten/go to image/add border with these setting/click ok
now go back and repeat but change color to white and all for boxes to 2/click ok
now duplicate 2x for three layer..click on white border with magic wand
floodfill 2ith color from paper
on main layer go to adjust/add/remove noise with these setting


on second layer change noise to 75 and third layer to 85/deselect.
add copyright and license number and first letter of name

To animate
Add your watermark and copyright and give your set to a friend.
thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it...riggsbee53@gmail.com

PTU Hungry Hills and Zindy Nielsen

Fallen

This tutorial was written on July 18th 2011.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working knowledge of using
Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,but can be adapted to use in other
Paint Shop Pro versions.



SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Zindy Nielsen..
You can purchase her tubes HERE...Please do not use without a license to do so

Scrapkit of Choice: I am using a PTU Fallen scrapkit from Sarah Hungry Hills
You can purchase it HERE or HERE....Thank you Sarah

Mask of choice: I'm using Christmas mask2 from Sabre. You can get it from
Creative Misfits Blog HERE..thanks Sabre

Font for name is TK Doodle and copy write is always done in Pixelette ...
Get them HERE

Drop shadow use throughout H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used...This is a simple one using
a cluster frame.


LET'S BEGIN

open up cluster frame. go to image and resize cavas with following setting below

we will resize later...this is just to give you more room to work.

add raster layer/close off frame layer/copy/paster paper of choice/go to layers
load/save mask/load mask from disk and choose mask with these setting

go to layer/merge group

with magic wand click on the inside of the frame/selections/modify/expand by 10
open and paste paper of choice/go to frame layer/selections/invert
now go to paper layer and delete/move paper layer underneath frame layer

open up your tube of choice and copy/paste on top of frame/resize if needed
now place between frame and paper layer.add any elements you wish to use.
add drop shadow to each element/Once you're finish decorating your tag
use your crop tool to crop your tag.

Add your watermark and copyright and give your tag to a friend.
thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it...riggsbee53@gmail.com

7/16/11

FTU Additive Pleasures and Myka Jelina

Pink Punk

This tutorial was written on July 14th 2011.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working knowledge of using
Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,but can be adapted to use in other
Paint Shop Pro versions.




 
SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Myka Jelina..You can purchase
her tubes HERE...Please do not use without a license to do so

Scrapkit Elements of Choice: I am using a Exclusive Misfit scrapkit from Additive Pleasures
You can download it HERE....Thank you Tammy

Font for name is Bensch Gothic and copy write is always done in Pixelette ...
Get them HERE

Drop shadow use throughout H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.

LET'S BEGIN

For banner

Open Up A new Raster layer 600 x 200 / 72dpi
Choose two colors from your tube of choice...now go to color pallet and click
follow these setting.



Change your color pallet to black/fa6fe2 go to present with these setting



Open new raster layer and flood fill with gradient color/lower Opacity to 50%
now copy and paste your closeup on right side...look at my tag for reference
duplicate and close off copy layer...on main tube layer change blend mode to
screen and lower opacity to 50%...on copy layer change blend mode to soft
light and lower opacity to 50%

now copy and paste smaller close up on left side..check my tag for placement
go to color pallet with top black and bottom the same pink/go to present with
same setting and draw out a smaller rectangle..see my tag

add any element of choice/add drop shadow to each element
layers/merge flatten/go to image/add border with these setting/click ok



now go back and repeat but change color to black and all for boxes to 2/click ok
now duplicate 2x for three layer..click on pink border with magic wand

on main layer go to adjust/add/remove noise with these setting



on second layer change noise to 75 and third layer to 85/deselect.
Add your water mark and copyright closed this we will animate in a bit.

for avatar

open up a new raster layer 150x150 / 72dpi
flood fill with your gradient color that you used in your banner
Change your color pallet to black/fa6fe2 go to present with same setting as above.
now copy and paste your closeup of just the head/duplicate and close this layer
on the main layer change blend mode to screen and lower opacity to 50
on the duplicated layer change opacity to 50

add any element of choice/add drop shadow to each element
layers/merge flatten/go to image/add border with these setting/click ok
now go back and repeat but change color to black and all for boxes to 2/click ok
now duplicate 2x for three layer..click on pink border with magic wand
on main layer go to adjust/add/remove noise with these setting
on second layer change noise to 75 and third layer to 85/deselect.

add copyright and license number and first letter of name

To animate

you with animate both banner and avatar the same way
close 2nd and 3rd layer and copy merge all other layers
take to animation shop and paste as new layer
go back to PSP and close 1st layer and open 2nd layer
copy merge and take to animation shop and edit/paste after current frame
go back and close 2nd layer and open 3rd layer and copy merge
go to animation shop and edit/paste after current frame
Now edit/select all and save as gif

thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it...riggsbee53@gmail.com

7/15/11

FTU Bel Vidotti Scraps and Ismael Rac

Who Dat Girl




This tutorial was written on July 13th 2011.
 Any similarities to another tutorial
is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working knowledge of using
Paint Shop Pro.
This tutorial was done in Paint Shop Pro9, but can be adapted to use in other
Paint Shop Pro versions.


SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Ismael Rac..You can purchase
his tubes HERE...Please do not use without a license to do so

Scrapkit of Choice: I am using a FTU kit from Bel Vidotti Scraps called Alone
Her site is no longer available, please use another kit....Thank you Bel

Template of Choice: I am using AquaRebel315 Who Dat Girl.
You can download it HERE...Thank you again Aqua

Mask of Choice: I'm using one of AquaRebel315 #013...You can find it HERE
Put mask in mask folder..Thanks so much for the use of your mask Aqua

Filters used: Xero Fritillary,Screen work - Lace Screen
Font for name is Twilight New Moon and copy write is always done in Pixelette ...
Get them HERE

Dropshadow use througout H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.


my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.


LET'S BEGIN

Open Up template and duplicate. Close original and go to copy. Remove credit layer.
Close of all layers but the background layer...
Choose a paper of choice/copy/paste and resize to fit layer...now go to layers/load/
save mask/load mask from disk/ and find your mask of choice
...with these setting see photo below




....go to layers/merge group

activate 1st circle layer/copy/paste/resize paper of choice.go to circle layer
and invert, then go to paper layer and delete/keep activated
go to adjust/add-remove noise/add noise with these setting...Do this twice/deactivate



Do this twice/deactivate....add drop shadow

leave layer 2 as is...on layer 3/activate/ Choose a paper of choice/copy/paste and
resize to fit layer/ go to circle layer and invert, then go to paper layer and
delete/keep activated/go to effect screenworks/and click on lace screen/merge down

Keep activated/choose your close up tube and paste on top of layer 3/resize if need
or the way you want it and hit delete/go to Xero fritillery and apply these setting



deactivate.add drop shadow to tube.

leave layer4 and copy of layer4 as is.on layer5 and copy of layer5, repeat the same
process as you did with the circle layer...also repeat process of placing your closeup
tube where you want it.On the left tube I added screen blend mode and the right tube
I added blend mode lighten/add drop shadow to layer4 and copy layer4

On layer6 copy/paste paper of choice/go to rectangle layer and invert,then go to paper
layer and delete/merge down/add drop shadow.leave layers 7,8 and 9 as is..
I just moved them to suit my tag.

Now add whatever elements you want and add drop shadow to each one.
Add you main tube and give a drop shadow.

Add your water mark and copyright and give to a friend
thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it...riggsbee53@gmail.com

FTU Bea's Creations and Pinuptoons

Shut Up

This tutorial was written on July 12th 2011.
Any similarities to another tutorial
is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working knowledge of using
Paint Shop Pro.
This tutorial was done in Paint Shop Pro9, but can be adapted to use in other
Paint Shop Pro versions.





SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of PinUpToons..You can purchase
his tubes HERE...Please do not use without a license to do so

Scrapkit of Choice: I am using a FTU kit from Bea's Creations called Shut Up
You can download it HERE....Thank you Bea

Mask of Choice: I'm using one of Insatiable Dreams 591...You can find it HERE
Put mask in mask folder..Thanks so much for the use of your mask Cat
Filters used: None

Font for name is Haunted Mouse Shadow and copy write is always done in Pixelette ...
Get them HERE

Drop shadow use throughout H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.


my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.

LET'S BEGIN

Open Up A new Raster layer 650 x 700 72dpi
Choose a paper of choice/copy/paste...now go to layers/Load/
save mask/load mask from disk/ and find your mask of choice...
with these setting see photo below....

go to layers/merge group

Open glitter2 and copy'paste on top of mask layer
 Resize and place where you want it
duplicate and mirror and merge down

copy/paste wire 2 and resize.this goes on top of glitter
open up frame 3 and copy/paste as a new layer.resiz
/now take magic wand and click
inside frame/selection /modify/expand by 10/keep activated

now select paper of choice and paste on top of frame layer. Resize/ go to frame layer
and invert, then go to paper layer and delete/keep actvated
copy/paste wordart and resize to fit frame/ go to frame layer and invert, then go
to paper layer and delete/keep actvated

Choose your tube and copy/paste...resize and go to frame layer and invert, then go
to paper layer and delete/click on layer and click screen/keep activated
Now copy/paste ribbon 3 on top of tube layer/resize/go to frame layer and invert,
then go to paper layer and delete/ deactivate

Now decorate your tag with elements of choice/add drop shadow on all elements
add your main tube/ resize if needed and place where you want it/add drop shadow

Add your water mark and copyright and give to a friend
thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it...riggsbee53@gmail.com

FTU Designs by Vaybs and Zlata M

I'm A Fly Chick

This tutorial was written on July 12th 2011. 
Any similarities to another tutorials purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working
 knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
 but can be adapted to use in other Paint Shop Pro versions.





                                                                  SUPPLIES NEEDED


Tube of Choice: I am using the awesome artwork of Zlata M..
You can purchase her tubes HERE
Please do not use without a license to do so

Scrapkit or colors of your choice...
I'm using Designs by Vaybs Brattitude
you can get it HERE...thanks Vabs

Mask of Choice: I'm using one of Insatiable Dreams #434...
You can find it HERE  Put mask in mask folder..
Thanks so much for the use of your mask Cat

Template of Choice: I am using one of AquaRebel315
Template#56..you can get it HERE...Thanks Aqua

Filters used: Xero- Porcelaid...HERE
Radiance....HERE
Fritillary...HERE

Font for name is MVBoli and copy write
 is always done in Pixelette ... Get them HERE

Drop shadow use throughout H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.


There's a lot of parts to this template, 
but I will try to make it simple for you,
 my tag is just a guide...please use
 your imagination and make the tag your own 
  you do not have to use any of the supplies
I used, but please use the template

LET'S BEGIN

Open up Template and ShiftD and close original...delete copyright layer
close all layers except the background layer...the one we'll be working on

Choose a paper of choice/copy/paste...now go to layers/Load/
save mask/load mask from disk/ and find your mask of choice...with these setting
(see photo below)....




go to layers/merge group

I left the two black circles and 2 white circles as is...on the blues circles
I used a paper..activate the first blue circle and copy/paste paper of choice.
resize paper/invert circle layer and then delete paper layer/merge down
...add drop shadow to circle layer
Now repeat this process for the second blue circle.

leave the 2 black and white stars as is...on the 2 blue stars use a paper of choice.
repeat the same process as you did with the blue circles/don't forget to merge
down and add drop shadow

leave big circle 1 and 2 as is... On big circle 3 choose another paper of choice
and repeat the process again as with the small blue circles.keep circle activated
and go to xero - fritillary with the setting below.



With circle 3 still activate take your tube and place on top of circle. make the closeup
as large as you want it...Go to the circle layer and invert/then go to the tube layer
and delete/add drop shadow.leave pixie text layer as is.

leave rectangle 1 and 2 as is....On rectangle 3 activate and paste paper of choice/resize
go to rectangle 3 and select invert and go to paper layer and delete. add drop shadow
on rectangle2 activate and copy/paste your tube but just the face. duplicate and mirror
on the first left face layer go to xero radiance and use these setting:



now click on layer and click screen.
on the right face layer duplicate mirror and close. Now on the right face go to
xero porcelain and use these setting:



now click on layer and click screen.
change the color of the word art to match your tag
now add any element you would like to make you tag reflect a fly chick

I put the speaker on the left circle and place the third face closeup inside.
Now on the face go to xero porcelain and use same setting as above 
now click on layer and click screen.

make sure you add drop shadow to your elements.
add your main tube in the middle of the two faces...add drop shadow

Add your water mark and copyright and give to a friend
thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it...riggsbee53@gmail.com