12/22/15

PTU Foxy Designz and Sheena Pike

Self Affliction

This tutorial was written on December 22,2015. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.







SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Sheena Pike.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using PTU Foxy Designz Sheena Pike IB 2-1
You can purchase it HERE ...Thanks Ann

Mask of Choice: I am using Sophistical Simone Mask # 73 
You can download it HERE .... Thank You Simone

Filters used:Eye Candy 4000 gradient glow - HERE
Blend of Choice

Font for Name is DK Father Frost 
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-60/B-6.85

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up new raster layer 800x800/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/merge group/duplicate
move this mask over to the right/merge mask



copy/paste element #15/resize if needed/place in center of canvas
resize if needed/add drop shadow

copy/paste element #17/resize if needed/place in on top od broken
photo frame/resize if needed/add drop shadow

copy/paste tbe of choice/resize if needed/place in center of swirl
add drop shadow

copy/paste element #20/resize if needed/place on right side of tube
resize if needed/add drop shadow

copy/paste element #12/resize if needed/place on top of leaves/right
side of frame/resize if needed/add drop shadow

copy/paste element #16/resize if needed/place on top of flower/right
rside of frame/esize if needed/add drop shadow

copy/paste element #10/resize if needed/place on top of feather/right
size of frame/resize if needed/add drop shadow

copy/paste element #13/resize if needed/place on left side near the
top of photo frame/resize if needed/add drop shadow

copy/paste element #3/resize if needed/place on top of arrow heart
left side of frame/resize if needed/add drop shadow

copy/paste element #8/resize if needed/place on top of pearl/right
side of frame/resize if needed/add drop shadow

add wordart if you wish/look at the tube and think of a slogon to 
add/use font of choice/add fat gradient glow/add drop shadow

add your watermark and copyright credits/give it a slight gradient 
glow.....now give your tag to a friend.

For name use this inner bevel with these settings/gradient glow/thin 
setting/twice add drop shadow

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

12/18/15

PTU LadyHawwk Designs and Anna Liwanag

Unforgettable

This tutorial was written on December 18,2015. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.






SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Anna Liwanag.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using PTU LadyHawwk Designs Classy Christmas
You can purchase it HERE ...Thank You Cat

Template of choice:I am using Dees'sign Depot exclusive CDO-View
You can download it HERE...Thanks Dee

Mask of Choice: I am using Monti Blinds Mask and Whips Mask 051403
You can download it HERE and HERE.... Thank You Monti and Whippy

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Arizonia
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-60/B-6.85

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete 
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok





On the following raster layers follow these directions...

activate left rounded squares layer/resize if needed/copy/paste 
paper of choice/resize paper/selections/invert on square layer
delete on paper layer/merge down/add drop shadow

activate circle layer/resize if needed/copy/paste paper of
choice/resize paper/selections/invert on square layer/delete 
on paper layer/merge down/add drop shadow/leave dotted line as is

activate white rounded rectangle layer/resize if needed/copy/paste 
paper of choice/resize paper/selections/invert on rectangle layer
delete on paper layer/merge down/add drop shadow/leave white oval
as is/add drop shadow

activate green oval layer/resize if needed/copy/paste paper of
choice/resize paper/selections/invert on oval layer/delete 
on paper layer/merge down/add drop shadow/leave overlay as is

Copy/paste frame 6/resize to fit oval layer/copy/paste tube of 
choice/leave blub shadow aand clear blub as is/make sure tube 
is underneath bulb/remove all excess tube from around bulb

add any other elements you wish to use/resize if needed/add drop 
shadow to each element/place where they will look best

add your watermark and copyright credits/give it a slight gradient 
glow.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

12/17/15

PTU Foxy Designz and Barbara Jensen

Silver Beauty

This tutorial was written on December 16,2015. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.







SUPPLIES NEEDED
Animation Shop; Get it HERE

Animation of Choice: I am using Rebel Designz. Animation pack #2
animation #5....Get it HERE.

Tube of choice: I'm using the awesome work of Barbara Jensen.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using PTU Foxy's Designz Silver Frost
You can purchase it HERE ...Thanks Ann

Mask of Choice: I am using Tonya Mask # 9 
You can download it HERE .... Thank You Tonya

Filters used:Eye Candy 4000 gradient glow - HERE
Blend of Choice
Xero-HERE
AAA Frame-Foto Frame - HERE

Font for Name is Janda Elegant Handwriting
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-60/B-6.85

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up new raster layer 800x800/flood fill with this color
cbc9de/effect/AAA Frame/foto frame with these setting

copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok



copy/paste window frame #23/resize if needed/place on top of mask
add drop shadow

copy/paste Christmas tree #45/resize if needed/place on top of window
frame /add drop shadow

copy/paste tube of choice/resize if needed/place on top of tree
duplicate tube/ on original layer/blend/screen/lower opacity to 90%


on copy layer/xero/porcelain with these setting/click ok



now it's time to have some fun/add any other elements you wish to use
resize if needed/add drop shadow to each element/place where they will 
look best

add wordart if you wish/add fat gradient glow/add drop shadow

add your watermark and copyright credits/give it a slight gradient 
glow.....

To Animate

close all layers on your tag except/mask/window frame and tree
copy/paste/merge your tag/copy/paste into animation shop
duplicate your tag for 25 frames
to do this/click on your tag/edit/duplicate selected 5 times
click on selected frame and duplicate 4 times/for total of 25 frames
edit/select all

open up the animation you want to use/edit/select all
copy/paste animation/paste into your tag/2 times/at the top
and at the bottom

go back to psp and close the three layers and open the layes you have
closed/copy/merge/paste remaining layers into animation shop
click on tag and duplicate for 25 frames/edit select all
copy/pasted into selected frame/view animation/if satisfied
save as gif......now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog



12/14/15

CDO Gimptastic Scraps and Maryline Cavenaze

Christmas Ho Ho Ho

This tutorial was written on December 13,2015. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.




SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Maryline Cavenaze.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using PTU Gimptastic Scraps CDO Melissa
Dawn IB 19-1...You can purchase it HERE ...Thank You Amy

Template of choice:I am using Punky Butts Template Winter/Holiday #3
You can download HERE ...Thank you Punky

Mask of Choice: I am using Insatiable Dreams#598
You can download it HERE.... Thank You at

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Remachine Script Personal
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-60/B-6.85

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.


     LET'S BEGIN

Open up Template and ShiftD and close original...delete 
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok



On the following raster layers follow these directions...

This template fitted the tube and the scrapkit perfectly 
so leave all layers of the template as is/you'll just be 
adding elements to complete the template.

copy/paste element #17 on top of the four window layers
place on right side of tag/add drop shadow

copy/paste tube of choice/place on top of the for window/add
drop shadow

copy/paste element #10/ resize by 70%/place beside tube layer
add drop shadow

add any other elements you wish to use/resize if needed/add drop 
shadow to each element/place where they will look best

add your watermark and copyright credits/give it a slight gradient 
glow.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

12/13/15

CDO Gimptastic and Maryline Cazenave



Christmas Cheese Please

This tutorial was written on December 12,2015. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.

 photo MC_Chesse Please-Amy.gif



SUPPLIES NEEDED

Animation Shop - HERE

Animation of Choice: Rebel Dezigns Animation Pack 155-#466
You can purchase it HERE.....Thank you Gizzy

Tube of choice: I'm using the awesome work of Maryline Cazenave.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using Gimptastic Scraps - Melissa
Dawn IB -19-1. You Can purchase HERE....Thank you Amy

Mask of Choice: I am using Gimptastic Tuts Mask 12
You can download it HERE.... Thank You Leah

Word Art of Choice: I used my own Word art

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Christmas Card
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-60/B-6.85

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up new raster layer 800x800/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok

Copy/past christmas Tree/resize by 70%/place in center of mask
add drop shadow

copy/paste house/ resize by 70%/place in front ofchristmas tree
add drop shadow

Copy/paste top hat/resize by 70%/place on top of house/add
drop shadow

Copy/paste christmas hat/resize by 70%/place behind house on right
side/add drop shadow

Copy/paste christmas gift/resize by 70%/place in front of house
on right side/add drop shadow

Copy/paste tube of choice/resize by 70%place on left side of tag
add drop shadow

write a wordart using font of choice/ incolor to match tag/add
fat gradient glow/sharpen/ and add drop shadow

add any other elements you wish to use/depending on what you want 
your tag to look like

add your watermark and copyright credits/give it a slight gradient 
glow.....

To Animate

close all layers except tree and mask/copy/merge/paste as new animation
into animation shop

Open the animation/you will see it has 25 frames/edit/select all

click on tag/edit/duplicate 5 times/then click on top frame
duplicate 4 times/you should have 25 frames/edit select all

copy/past animation on seleted frame/place on top of tree twice

now go back to psp and close those two layers and open the rest
copy/merge into animation shop as new animation

click on tag and duplicate as above for 25 frames/edit select all
copy into selected frame/place on top of animation/view animation
if satisfied/save  as gif 

now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to.... riggsbee53@gmail.com


CDO BabyCake Scraps and Maryline Cavenaze

Raising Cane

This tutorial was written on December 13,2015. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.




SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Maryline Cavenaze.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using PTU BabyCakes Scraps Holiday Sparkle
You can purchase it HERE ...Thank You Lynne

Template of choice:I am using Punky Butts Template # 148
You can download HERE

Mask of Choice: I am using Tonya's Temptationz-Mask 9
You can download it HERE.... Thank You Tonya

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Bauhaus
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-60/B-6.85

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.


     LET'S BEGIN

Open up Template and ShiftD and close original...delete 
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok



On the following raster layers follow these directions...

This template fitted the tube and the scrapkit perfectly 
so leave all layers of the template as is/you'll just be 
adding elements to complete the template.

on the left large square/copy/paste element #13/resize if needed
copy/paste elemennt #16/resize if needed/see tag for placement
add drop shadow

on the right large square/copy/paste element #13/resize if needed
copy/paste elemennt #16/resize if needed/see tag for placement
add drop shadow

on the left small square/copy/paste element #12/resize if needed
see tag for placement/add drop shadow

on the right small square/copy/paste element #12/resize if needed
see tag for placement/add drop shadow

copy/paste tube of choice/place on top of rectangle frame/activate 
oval layer/invert on oval layer/delete on tube layer/select none

copy/paste element 10/ resize by 70%/place beside tube layer/add
drop shadow

add any other elements you wish to use/resize if needed/add drop 
shadow to each element/place where they will look best

add your watermark and copyright credits/give it a slight gradient 
glow.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to.... riggsbee53@gmail.com

PTU LadyHawwk Designs and Maryline Cavenaze

Snow Much Fun

This tutorial was written on December 13,2015. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.




SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Maryline Cavenaze.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using PTU CDO Mini Tranquil Winter
You can purchase it HERE ...Thank you Cat

Template of choice:I am using Mythical Designs Template Snow
You can download  HERE....Thank you Myth

Mask of Choice: I am using Vix Big Mask 019
You can download it HERE.... Thank you Vix

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Distant Stroke
Copy write is always done in Pixelette  HERE

Dropshadow use through out H-2/V-2/O-60/B-6.85

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.


     LET'S BEGIN

Open up Template and ShiftD and close original...delete 
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/merge group/duplicate
mask/move second mask to the lower right/merge both mask



On the following raster layers follow these directions...

This template fitted the tube and the scrapkit perfectly 
so leave all layers of the template as is/you'll just be 
adding elements to complete the template.

pick a dark color #683725 from the tube that you are using
on dark square layer/activate and flood fill with that color
leave white square as is/add drop shadow to both squares

pick a lighter color #d08851 from the tube that you are using
on bottom pink square flood fill with that color/do this with 
top pink square also/add drop shadow to both squares

Snow flakes remain the same/just move them to suit your tag
add drop shadow

same dark color #683725/flood fill pink circle with this color
keep activaated/copy/paste tube of choice/place tube so that 
the head fills the circle/invert on circle/delete on tube/add
drop shadow on circle and tube

add any other elements you wish to use/resize if needed/add drop 
shadow to each element/place where they will look best

Copy/paste the main tube on your tag/position it where it will 
look best to you/resize if needed/ add drop shadow

rearrange word art to where you want it/add thin gradient glow
sharpen/add drop shadow

add your watermark and copyright credits/give it a slight gradient 
glow.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

12/12/15

PTU LadyHawwk Designs and Maryline Cavenaze

inter Cutie

This tutorial was written on December 12,2015. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.






SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Maryline Cazenave.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using PTU LadyHawwk Designz Maryline Cazenave
December 2015 BT
You can purchase it HERE ...Thank You Cat

Template of choice:I am using Milliespspmadness Template #127
You can download it HERE...Thanks Millie

Mask of Choice: I am using Designz by Vaybs Christmas Mask 08
You can download it HERE.... Thank You Vaybs

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Sabrina Star
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-60/B-6.85

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete 
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok

On the following raster layers follow these directions...

activate left rounded squares layer/resize if needed/copy/paste 
paper of choice/resize paper/selections/invert on square layer
delete on paper layer/merge down/add drop shadow

activate small circles layer/resize if needed/recolor with a color 
white/#ffffff/add drop shadow to both circles

activate large rounded rectangle layer/resize if needed/copy/paste 
paper of choice/resize paper/selections/invert on rectangle layer
delete on paper layer/merge down/add drop shadow

activate large circle layer/resize if needed/copy/paste paper of
choice/resize paper/selections/invert on rectangle layer/delete 
on paper layer/merge down/add drop shadow

activate copy of rectangle layer/resize if needed/copy/paste paper 
of choice/resize paper/selections/invert on rectangle layer/delete 
on paper layer/merge down/add drop shadow

activate small circle layer/resize if needed/copy/paste paper of
choice/resize paper/selections/invert on circle layer/delete on
paper layer/merge down/keep activated/copy/paste tube of choice
delete on tube layer/selections none/add drop shadow

leave snowflake layers as is/add drop shadow/copy/paste main 
tube/resize if needed/place on right side of tag/add drop shadow

add any other elements you wish to use/resize if needed/add drop 
shadow to each element/place where they will look best

add your watermark and copyright credits/give it a slight gradient 
glow.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

12/11/15

PTU Creative Crazy Scraps and Ismael Rac

Music

This tutorial was written on December 11,2015. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.



SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Ismael Rac.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using PTU Creative Crazy Scraps The Voice Within
You can purchase it HERE ...Thank You Stu

Template of choice:I am using Toxic Desirez Mask 251
You can download it HERE...Thanks Kristin

Mask of Choice: I am using music paper that's in the kit
Thank You Stu

Filters used:Eye Candy 4000 gradient glow - HERE
Eye Candy Soften
Mura's Seamless

Font for Name is Remachine Script Personal
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-60/B-6.85

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...close all layers
copy/paste music element that is in the kit/resize by 70%/rotate 
15 degrees right/add drop shadow

On the following raster layers follow these directions...

activate left rectangle layer 8/copy/paste paper of choice/resize 
paper/selections/invert on rectangle layer/delete on paper layer
merge down/add drop shadow

activate copy of rectangle layer 8/copy/paste paper of choice resize 
paper/selections/invert on rectangle layer/delete on paper layer/merge 
down/add drop shadow

activate rectangle layer 7/copy/paste paper of choice resize paper
selections/invert on rectangle layer/delete on paper layer/merge down 
add drop shadow

activate copy of rectangle layer 7/copy/paste paper of choice resize 
paper/selections/invert on rectangle layer/delete on paper layer/merge 
down/add drop shadow

activate left square layer 6/copy/paste paper of choice resize paper
selections/invert on square layer/delete on paper layer/merge down
add drop shadow

activate copy of left square layer 6/copy/paste paper of choice resize 
paper/selections/invert on square layer/delete on paper layer/merge down
add drop shadow

recolor circle layer 3 a darker color from one of the paper/add drop
shadow

activate left circle layer 4/copy/paste paper of choice resize paper
selections/invert on circle layer/delete on paper layer/copy/paste tube
of choice/resize if needed/place tube in center of circle/effects/penta.com
color dot with these settings/click ok/merge down/add drop shadow

activate left circle layer 4/copy/paste paper of choice resize paper
selections/invert on circle layer/delete on paper layer/copy/paste tube
of choice/resize if needed/place tube in center of circle/effects/penta.com
color dot with these settings/click ok/merge down/add drop shadow

activate middle circle layer 5/copy/paste paper of choice/resize paper
selections/invert on circle layer/delete on paper layer/merge down
keep activated/copy/paste tube of choice/place in center of circle/delete
on tube layer/duplicate tube/on original layer/blend/overlay/on duplicate
lower opacity to 60%/add drop shadow to both tubes

Copy/paste main tube of choice/resize if needed/place tube where it will
look best/ add drop shadow

add any other elements you wish to use/resize if needed/add drop shadow
to each element/place where they will look best

copy/paste word art from kit/add gradient glow/add slight drop shadow

add your watermark and copyright credits/give it a slight gradient glow
.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

12/8/15

CDO Chichi Designz and Enamorte

Dove Wings

This tutorial was written on December 09,2015. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.

 photo Enamorte-Dove Wings-Cindy.gif






SUPPLIES NEEDED
Animation Shop 3 ....HERE

Animation of Choice: I am using Scrappy Bit of Fun Animation 
you can download HERE .... Thank you Simone

Tube of choice: I'm using the awesome work of Enamorte.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using PTU Chichi Designz Enamorte IB 33-1
You can purchase it HERE ...Thank You Cindy

Template of choice:I am using Leah Template #6.Amy&Leah Gimptastic Tuts
You can download it HERE...Thanks Leah

Mask of Choice: I am using Insatiable Dreams-Mask 37
You can download it HERE.... Thank You Cat

Filters used:Eye Candy 4000 gradient glow - HERE
Penta.com- Dot and Cross - HERE

Font for Name is Arizonia
Copy write is always done in Pixelette  HERE

Dropshadow use through out H-2/V-2/O-60/B-6.85

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete 
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok

On the following raster layers follow these directions...

activate small circle 2 back/copy/flood fill with white-#ffffff
add drop shadow

activate small circle layer/copy/paste paper of choice resize paper
selections/invert on circle layer/delete on paper layer/merge 
down/add drop shadow

activate small circle 1 back/copy/flood fill with white-#ffffff
add drop shadow

activate small circle layer/copy/paste paper of choice resize paper
selections/invert on circle layer/delete on paper layer/merge 
down/add drop shadow

Leave large circle  back layer as is/add drop shadow
activate large circle/taking a color from the paper #2 and flood fill
the large circle

activate rectangle 3 back layer/copy/flood fill with white-#ffffff
add drop shadow

activate rectangle 3 layer/copy/paste paper of choice resize paper
selections/invert on rectangle layer/delete on paper layer/merge 
down/keep activated/copy/paste closeup tube/delete on tube layer
effects/penta.com-dot and cross/with these setting/click ok/add 
drop shadow to tube and rectangle

activate rectangle 2 back layer/copy/flood fill with white-#ffffff
add drop shadow

activate rectangle 2 layer/copy/paste paper of choice resize paper
selections/invert on rectangle layer/delete on paper layer/merge 
down/keep activated/copy/paste closeup tube/delete on tube layer
effects/penta.com-dot and cross/with these setting/click ok/add 
drop shadow to tube and rectangle

activate rectangle 1 back layer/copy/flood fill with white-#ffffff
add drop shadow

activate rectangle 1 layer/copy/paste paper of choice resize paper
selections/invert on rectangle layer/delete on paper layer/merge 
down/keep activated/copy/paste main tube/add drop shadow to tube 
and rectangle

add any other elements you wish to use/resize if needed/add drop 
shadow to each element/place where they will look best

add your watermark and copyright credits/give it a slight gradient 
glow.....

To animated

close name,white angle and flower
copy/merge tag and take to animation shop
edit/duplicate 5 times/click on top frame and duplicate 3 times
edit/select all
open your animation of choice/edit select all/paste into selected
frame/place on both sides of smaller frame/see my tag for placement
go back to psp and close layers and open the three that were closed.
copy/merge and take to animation shop
edit/duplicate 5 times/click on top frame and duplicate 3 times
edit/select all/paste into selected frame on top of animated frame
view animation/if satisfied/save as gif
You're done...thank you for trying my tutorial
now give your tag to a friend.

please send me a copy so that I can show case it on my blog
send to.... riggsbee53@gmail.com

Here's another tag I made with this kit