FTU Clarey Scraps and Ralph Macrey

Get Checked

 

This tutorial was written on October 18,2012.

Any similarities to another tutorial is purely coincidental.

All my tutorial are register with My Free Copyright.

Please do not claim as your own.

This tutorial writer assumes you have a working

knowledge of using Paint Shop Pro.

This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other

Paint Shop Pro versions.

 

SUPPLIES NEEDED

Tube of choice: I am using the artwork of Ralph Macrey

Use of this tube is prohibited unless you have a license to

do so.You may purchase his tubes at Artistic Dreams Imaging

Scrapkit of Choice: I am using Clarey Awareness kit FTU

unfortunately Clarey no longer has her blog. Please use

another kit

Template of choice: I am using Brights Kreationz #18

BCA Template-You can download it HERE...Thank you Bright

Mask of Choice: I am using 0mask-011_LT...You can download it

Here.....If you know who made this mask please contact me at

the address below so that I may give credit

Filters used: Eye Candy 4000 gradient glow - HERE

Font for used: New Romans Times and Constantia

Copy write is always done in Pixelette

Get them HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

this is a very simple tutorial, great for beginners

my tag is just a guide...please use your imagination

and make the tag your own. You do not have to

use any of the supplies I used.

LET'S BEGIN

Open up Template and ShiftD and close original...delete

copyright layer/close all layers/copy/paste paper of choice

layers/load/save mask/locate mask/set with these settings

below/click ok

layers/merge/merge group/change color to

match a color from your tube/add drop shadow

On the following raster layers follow these directions...

glittered rectangle layer as is/color rectangle layer to

match a color from your tube/add drop shadow

copy/paste tube of choice/duplicate and close/

bottom glittered rectangle layer as is/on bottom rectangle

layer/ color paper to match your tag/add drop shadow

top glittered rectangle layer as is/on top rectangle layer

color paper to match your tag/add drop shadow

change BCA word art color by alternating the letters/first using

magic wand click inside the letters you want for the first color

using fill tube fill those letters/deactivate those letters and

click into the remaining letters/using your fill tube fill these

letters with a different color/deactivate and add drop shadow

change Get Checked word art letterwith the darker color

add a drop shadow

add any other elements to make your tag your own/add drop

 shadow on each element/resize your tag

add your watermark and copyright credits/give it a slight gradient

glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial

please send me a copy so that I can show case it on my blog

send to.... riggsbee53@gmail.com

FTU Bluedreams Designs and Ralph Macrey

Beware

This tutorial was written on October 17,2012.

Any similarities to another tutorial is purely coincidental.

All my tutorial are register with My Free Copyright.

Please do not claim as your own.

This tutorial writer assumes you have a working

knowledge of using Paint Shop Pro.

This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other

Paint Shop Pro versions.

 

SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Ralph Macrey .

Please do not use unless you have a license to do so.

You can get his tubes HERE

Scrapkit of Choice: I am using Bluedreams Designs FTU Breast

Cancer Awareness You can download it HERE ...Blue

Template of choice:I am using Temps by Tonya Beware

You can download it HERE...Thank you Tonya

Mask of Choice: I am using Insatible Dreams Mask #37

You can download it HERE...Thank you Cat

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Gabriola

Copy write is always done in Pixelette HERE

Dropshadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination

and make the tag your own you do not have to

use any of the supplies I used.

LET'S BEGIN

Open up Template and ShiftD and close original...delete

copyright layer/close all layers/copy/paste paper of choice

layers/load/save mask/locate mask/set with these settings

below/click ok

On the following raster layers follow these directions...

activate rectangle1 layer/copy/paste paper of choice/resize

selection/invert on rectangle1 layer/delete on paper layer

merge down/add drop shadow

activate rectangle2 layer/copy/paste paper of choice/resize

selection/invert on rectangle2 layer/delete on paper layer

merge down/add drop shadow

activate circle1 layer/copy/paste paper of choice/resize

selection/invert on circle1 layer/delete on paper layer

merge down/leave activated/copy/paste tube of choice

resize if needed/selections/delete on tube layer/dulplicate
tube/on original layer/blend/hard light on duplicate layer

lower opacity to 50%/place on top of original layer
add drop shadow

activate circle2 layer/copy/paste paper of choice/resize

selection/invert on circle2 layer/delete on paper layer

merge down/leave activated/copy/paste tube of choice

resize if needed/selections/delete on tube layer/dulplicate

tube/on original layer/blend/screen on duplicate layer

lower opacity to 76%/place on top of original layer
add drop shadow

activate rectangle background layer/copy/paste
 paper of choice/resize/invert on rectangle background
layer/delete on paper layer

merge down/copy/paste element of choice/resize
add drop shadow

copy/paste main tube/resize if needed/place where it will

look best/add drop shadow to tube

add any other elements to make your tag your
own/add drop  shadow on each element
resize your tag change wordart with word
art in kit/add drop shadow

add your watermark and copyright credits/give it a slight

gradient glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial

please send me a copy so that I can show case it on my blog

send to.... riggsbee53@gmail.com

FTU Bluedreams Designs and Ralph Macrey

Check Your Rack

This tutorial was written on October 16,2012.

Any similarities to another tutorial is purely coincidental.

All my tutorial are register with My Free Copyright.

Please do not claim as your own.

This tutorial writer assumes you have a working

knowledge of using Paint Shop Pro.

This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other

Paint Shop Pro versions.

 

SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Ralph Macrey .

Please do not use unless you have a license to do so.

You can get his tubes HERE

Scrapkit of Choice: I am using Bluedreams Designs FTU BCA-2009

You can purchase it HERE ...Blue

Template of choice:I am using Designs by Vaybs 0710

You can download it HERE...Thank you Vaybs

Mask of Choice: I am using Insatible Dreams Mask #370

You can download it HERE...Thank you Cat

Filters used: Eye Candy 4000 gradient glow - HERE

Font for Name is Bella Donna

Copy write is always done in Pixelette HERE

Dropshadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination

and make the tag your own you do not have to

use any of the supplies I used.

LET'S BEGIN

 

Open up Template and ShiftD and close original...delete

copyright layer/close all layers/copy/paste paper of choice

layers/load/save mask/locate mask/set with these settings

below/click ok

On the following raster layers follow these directions...

activate square1 layer/copy/paste paper of choice/resize

selection/invert on square1 layer/delete on paper layer

merge down/leave bca layer as is/add drop shadow to square

layer/circle1 layer as is

activate circle2 layer/copy/paste paper of choice/resize

selection/invert on circle2 layer/delete on paper layer

merge down/leave activated/copy/paste tube of choice

resize if needed/selections/delete on tube layer/add drop

shadow/leave circle3 and circle4 as is/copy/paste element

of choice/ resize if needed/add drop shadow

activate square2 layer/copy/paste paper of choice/resize

invert on square2 layer/delete on paper layer/merge down

copy/paste element of choice/resize/add drop shadow

activate square3 layer/copy/paste paper of choice/resize

invert on square3 layer/delete on paper layer/merge down

copy/paste element of choice/resize/add drop shadow

activate circle5 layer/copy/paste paper of choice/resize

invert on circle5 layer/delete on paper layer/merge down

leave circle6 layer and circle7 layer as is/keep circle7

layer activated/copy/paste tube of choice/delete on tube

layer/duplicate tube/on original layer/blend/soft light

on duplicate layer lower opacity to 90%/place on top of
original layer/add drop shadow

leave circle8 and circle9 as is/add drop shadow/copy/paste

element of choice on each/resize/add drop shadow/leave

frame1 and frame2 as is/add drop shadow to each

copy/paste main tube/resize if needed/place where it will

look best/add drop shadow to tube

add any other elements to make your tag your own/add drop

shadow on each element/resize your tag

leave wordart as is/add drop shadow

add your watermark and copyright credits/give it a slight

gradient glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial

please send me a copy so that I can show case it on my blog
send to.... riggsbee53@gmail.com

FTU Monti Playhouse and Elias Chatzoudis

Fight

This tutorial was written on October 11,2012.

Any similarities to another tutorial is purely coincidental.

All my tutorial are register with My Free Copyright.

Please do not claim as your own.

This tutorial writer assumes you have a working

knowledge of using Paint Shop Pro.

This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other

Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Elias Chatzoudis .

Please do not use unless you have a license to do so.

You can get his tubes HERE

Scrapkit of Choice: I am using FTU Monti Breast Cancer Awareness

You can download it HERE ...Thank you Monti

Template of choice:I am using Template Divine Intentionz #408

You can download it HERE...Thank you Missy

Mask of Choice: I am using Monti Blind mask

You can download it Here...Thank you Monti

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Inscription LET

Copy write is always done in Pixelette HERE

Dropshadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination

and make the tag your own you do not have to

use any of the supplies I used.

LET'S BEGIN

Open up Template and ShiftD and close original...delete

copyright layer/close all layers/copy/paste paper of choice

layers/load/save mask/locate mask/set with these settings

below/click ok

On the following raster layers follow these directions...

copy/paste paper of choice/resize if needed/place underneath

mask layer

activate rectangle layer/copy/paste paper of choice/resize

selection/on rectangle layer/invert/on paper layer delete

add element of choice/ resize if needed/add drop shadow to both

leave small rectangle as is/add drop shadow

activate left square layer/copy/paste paper of choice/resize

selection/ invert on square layer/delete on paper layer

activate right square layer/copy/paste paper of choice/resize

selection/ invert on square layer/delete on paper layer

add element of choice/add drop shadow

leave both med rectangle and long rectangle layers as is

add drop shadow

activate large square layer/recolor to match tag/copy/paste

tube of choice/resize as needed/selection/invert on square

layer/delete on tube layer/add drop shadow

activate medium square layer/recolor to match tag/copy/paste

element of choice/resize as needed/add drop shadow

activate small square layer/recolor to match tag/copy/paste

element of choice/resize as needed/add drop shadow

leave frames as is and add drop shadow

add any other elements to make your tag your own/add drop

shadow on each element/resize your tag

add main tube of choice/resize if needed/place where it will

look best/add drop shadow

add your watermark and copyright credits/give it a slight

gradient glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial

please send me a copy so that I can show case it on my blog

send to.... riggsbee53@gmail.com

PTU KCreations and Medievil Creations Poser

This tutorial was written on May 3,2012.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of choice: Medievil Creations Posers within kit

Scrapkit of Choice: I am using KCreations PTU Scrap kit
Called Cancer Awareness...You can purchase it HERE...Thank you Kari

Mask of choice:I am using Horseplay's Pasture mask #30
You can download it HERE...Thank you Bev

Template of Choice: I am using Melissaz Creationz -Template #71
You can download it HERE....Thank you Melissaz

Filters used:Eye Candy 4000 gradient glow - HERE
Xero -Radiance...HERE

Font for Name is Berylium...HERE
Copy write is always done in Pixelette ...HERE


Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.


my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete
copyright layer/close all layers/choose paper of choice
copy/paste and put underneath background layer/go to mask
of choice with these setting and click ok/delete background
layer

On the following raster layers follow these directions...
to avoid confusion/label each layer

activate circle layer/copy/paste paper of choice/go to
circle layer/invert/go to paper layer and delete/merge
down/copy/paste flower of choice/resize to fit inside of
circle/add drop shadow/copy/paste round frame of choice
resize to fit/add drop shadow

activate rectangle layer/copy/paste paper of choice go to
rectangle layer/invert/go to paper layer and delete/merge
down/add drop shadow

activate rectangle2 layer/copy/paste paper of choice go to
rectangle2 layer/invert/go to paper layer and delete/merge
down/add drop shadow

activate square1/copy/paste poser or tube of choice/resize
by 50%/place poser or tube where you want it to show/selection
on square1 layer/invert/on poser layer/delete/selection/none
remove all excess from canvas/duplicate tube or poser/on
original blend/screen/place duplicate underneath original/add
drop shadow to both/on dotted square recolor to match tag

activate rectangle3 layer/copy/paste paper of choice go to
rectangle3 layer/invert/go to paper layer and delete/merge
down/add drop shadow

on dotted line1 duplicate 3x merging each layer into one/add
drop shadow of 1/1/60/3

on dotted line2 change color to match tag/add  same drop
shadow as above

activate square2 layer/copy/paste paper of choice go to square2
layer/invert/go to paper layer and delete/merge down/add drop
shadow/copy/paste poser or tube of choice/resize by 50%/place
poser or tube where you want it to show/selection on square2
layer/invert/on poser layer/delete/selection/none/Image/mirror
remove all excess from canvas/duplicate tube or poser/on original
xero/radiance with these setting

blend/soft light/on duplicated
layer place underneath original/lower opacity to 50%/add drop
shadow to both/leave dotted square2 as is

now add any other element you wish to use to make your tag your
own/add drop shadow on each element

you can either add a word art to your tag or not...it's up to you

add your watermark and copyright credits/give it a slight gradient
glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....riggsbee53@gmail.com

FTU Scrappity Scraps and More and Keith Garvey - Think Pink

This tutorial was written October 6,2009. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are protected through  My Free Copyright
 so please read my tou before using
This is my Second Breast Awareness tutorial.
 I hope you enjoy using this tutorial.

Supplies needed

Tube of Choice: I am using one of Keith Garvey gorgeous tubes.
You can purchase his tubes HERE
You must have a license to use his art

Template of choice: I'm using one from Scrapity Scraps and More..
you can get it HERE.....Please leave

some love when you download from her site. Thank you

Scrap Kit of choice:  I'm using one from Nicole 
at Digital Artistry by Nicole...Thank you Nicole

Mask of Choice: I'm using Monti-Blinds Mask ...You can get it HERE..
Don't forget to leave some love....Thank you Monti

Drop shadow throughout is H-2 V-2 O-40 B-4 C- blk

Font is Mr.Leopolde and Pixelette which can be found HERE

No outside filters needed

Let's Begin

Open up Template/ Image canvas size 700x700/click ok
 flood fill background white (we will resize later)

delete copyright layer/x out all layers except background.

Go to scrapkit and choose paper of choice.
  Copy and paste above white background
go to Layers...load/save mask...load mask from disk

Merge group down and duplicate once...merge down

activate lg circle layer/copy/paste paper of choice

go to lg circle layer/invert/go to paper layer and delete

delete original circle layer/add drop shadow

leave dotted circle layer as is 

activate lg rectangle layer/copy/paste paper of choice

go to lg rectangle layer/invert/go to paper layer and delete

delete original layer/add drop shadow

leave middle circle white/add doodle/resize/add drop shadow

activate double diamond layer/copy/paste paper of choice

go to double diamond layer/invert/go to paper layer 

and delete/delete original layer/add drop shadow

 I left the diamond frame the way it was (white)

activate rectangle1 layer/copy/paste paper of choice

go to rectangle1 layer/invert/go to paper layer and delete

delete original layer/add drop shadow

activate rectangle2 layer/copy/paste paper of choice

go to rectangle2 layer/invert/go to paper layer and delete

delete original layer/add drop shadow

 

resize everything to your liking......
Add any element to make your tag your own..

I used the word art,bow,and doodle....drop shadow on everything
Add your tube on top of everything except wordart
 give it a drop shadow....resize your tag if needed

Add copyright and watermark..
Add a friends name and you're done!!!!!

Thank you for trying my tutorial!!!
If you use please send me a copy
so I can showcase it
send to riggsbee53@gmail.com

FTU Cazzie Scraps and Victor Jung - Save The Boobies

This tutorial was written October 6, 2009. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are protected through  My Free Copyright,
 so please read my tou before using...
This is my First Breast Awareness tutorial. 
I hope you enjoy using this tutorial.

Supplies needed


Tube of Choice: I am using the awesome work of Victor Jung.
 You can find his fabulous art work HERE
Please do not use his art work unless you have a license to do so...


Template of choice: I'm using one from Scrapity 
Scraps and More..you can get it HERE.
Please leave some love when you download
 from their site. Thank you


Scrap Kit of choice: I'm using Cazzie Scraps,
Called Breast Cancer Awareness2009....you can
get it HERE...Please leave some Love.Thank you Cazzie


Mask of Choice: I'm using weescotslass WSL142...
You can get it HERE.
.Don't forget to leave some love.
Thank you Chell


Drop shadow throughout is H-2 V-2 O-40 B-4 C- blk

Font is Fireside ChatNF and Pixelette 
which can be found HERE
No outside filters needed


Let's Begin


Open up Template and go to Image canvas size 700x700 click ok
and flood fill background white (we will resize later)
delete copyright layer.x out all layers except background. 

Go to scrap kit and choose paper of choice.
Copy and paste above white background. go to Layers...
load/save mask...load mask from disk

Merge group down and duplicate once...merge down

activate rectangle layer/copy/paste paper of choice
rectangle layer/selections/ invert/paper layer
delete/add drop shadow

activate thin rectangle layer/copy/paste paper of choice
thin rectangle layer/selections/ invert/paper layer
delete/add drop shadow
 leave thin frame as is

activate rectangle1 layer/copy/paste paper of choice
rectangle1 layer/selections/ invert/paper layer
delete/add drop shadow

activate rectangle2 layer/copy/paste paper of choice
rectangle2 layer/selections/ invert/paper layer
delete/add drop shadow
 
activate large circle layer/copy/paste paper of choice
large circle  layer/selections/ invert/paper layer
delete/add drop shadow 

activate small circle layer/copy/paste paper of choice
small circle  layer/selections/ invert/paper layer
delete/add round frame from kit/add drop shadow 

(On half circle I left it white)

 I used the butterfly,rose,bow,frame and the survivor tag....drop shadow on everything....Add your tube on
 top of everything except word art
give it a drop shadow....resize your tag if needed

Add copyright and watermark..Add a friends
 name and you're done!!!!!

Thank you for trying my tutorial!!!