2/27/13

PTU Designs by Ali and Dark Yarrow

She's Completely Bad Ass

This tutorial was written on February 16,2013. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.




SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Dark Yarrow.
Please do not use unless you have a license to do so. 
You can get her tubes HERE

Scrapkit of Choice: I am using PTU Designs by Ali-Lost In The Shadows 
Ali is no longer selling her kits..please use another ...Thanks Ali

Template of choice:I am using Designs by Ali Template #159
Ali no longer has her site up..please use another...Thanks Ali

Mask of Choice: I am using Weescotslass Creations # 252
You can download it Here...Thanks Chell

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is 
Copy write is always done in Pixelette  HERE


Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.


my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete 
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background




On the following raster layers follow these directions...

leave dotted grey and black lines as is

activate rectangle layer/copy/paste paper of choice/resize
paper/selection/invert on rectangle layer/delete on paper
layer/merge down/copy/paste elements of choice/resize/place near 
the right side and in the middle/add drop shadow

activate lg square layer/copy/paste paper of choice/resize
paper/selection/invert on lg square layer/delete on paper
layer/add drop shadow/merge down/keep activated/copy/paste tube
 of choice/resize to fit square/ leave frame as is/add drop shadow

add any other elements you wish to use/resize/add drop
shadow

add your watermark and copyright credits/give it a slight 
gradient glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to.... riggsbee53@gmail.com

PTU Toxic Desirez and FourXDesigns

That Girl Rocks


This tutorial was written on February 16,2013. 

Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.




SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of FourXDesigns.
Please do not use unless you have a license to do so. 
You can get her tubes HERE

Scrapkit of Choice: I am using PTU Toxic Desirez- Rock On
You can purchase it HERE ...Thanks Kristin

Template of choice:I am using Additive Pleasure Template #106
You can download it HERE...Thanks Tamie

Mask of Choice: I am using Vix big mask #003
You can download it Here...Thanks Vix

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is A&S Snapper Script
Font for word art is Mondo Cane 
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN


Open up Template and ShiftD and close original...delete 
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background



On the following raster layers follow these directions...

activate v.rectangle layer/copy/paste paper of choice/resize
paper/selection/invert on v.rectangle layer/delete on paper
layer/merge down/add drop shadow

activate sm v.rectangle layer/copy/paste paper of choice/resize
paper/selection/invert on sm v.rectangle layer/delete on paper
layer/merge down/copy/paste elements of choice/re size/place near 
the top of layer/add drop shadow

activate lg circle layer/copy/paste paper of choice/re size
paper/selection/invert on lg circle layer/delete on paper
layer/add drop shadow/merge down/copy/paste element of choice
resize to fit/add drop shadow

activate med circle layer/copy/paste paper of choice/re size
paper/selection/invert on med circle layer/delete on paper
layer/merge down/copy/paste element of choice/re size/add 
drop shadow

activate diamond 1 layer/copy/paste paper of choice/re size
paper/selection/invert on diamond 1 layer/delete on paper
layer/merge down/keep activated/copy/paste closeup tube 
of choice/resize to fit/delete/leave frame as is/add drop 
shadow
activate diamond 2 layer/copy/paste paper of choice/resize
paper/selection/invert on diamond2 layer/delete on paper
layer/merge down/copy/paste element of choice/resize to
fit/leave frame as is/add drop shadow

copy/paste your tube of choice/resize if needed/place your 
tag where it will look best/add drop shadow

activate long strip layer/copy/paste paper of choice/resize
paper/selection/invert on long strip layer/delete on paper
layer/merge down/add drop shadow/on word art/choose a paper
go to material pallet and chose paper pattern/selections
float/defloat on word art layer/fill with pattern/add drop
shadow 

activate small circle layer/copy/paste paper of choice/resize
paper/selection/invert on small circle layer/delete on paper
layer/merge down/copy/paste element of choice/resize to
fit/leave circle frame as is/add drop shadow

activate word art 2 background/change color from white to 
black/activate word art 2 layer/copy/paste paper of choice
delete on paper layer/merge down/merge down again/add 
drop shadow

activate word art 3 background/change color from white to 
black/activate word art 3 layer/copy/paste paper of choice
delete on paper layer/merge down/merge down again/add 
drop shadow

add any other elements you wish to use/resize/add drop
shadow

add your watermark and copyright credits/give it a slight 
gradient glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

2/16/13

PTU Designs by Ali and Dark Yarrow

Raven's Sorrow

This tutorial was written on February 16,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.


SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Dark Yarrow.
Please do not use unless you have a license to do so.
You can get her tubes HERE

Scrapkit of Choice: I am using PTU Designs by Ali-Lost In The Shadows
Ali is no longer selling her kits..please use another ...Thanks Ali

Template of choice:I am using Designs by Ali Template #159
Ali no longer has her site up..please use another...Thanks Ali

Mask of Choice: I am using Vix big mask #19
You can download it HERE...Thanks Vix

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is
Copy write is always done in Pixelette  HERE


Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.


my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background



On the following raster layers follow these directions...

activate v.rectangle layer/copy/paste paper of choice/resize
paper/selection/invert on v.rectangle layer/delete on paper
layer/merge down/add drop shadow

activate small v.rectangle layer/copy/paste paper of choice/resize
paper/selection/invert on small v.rectangle layer/delete on paper
layer/merge down/copy/paste elements of choice/resize/place near
the top of layer/add drop shadow

activate lg circle layer/copy/paste paper of choice/resize
paper/selection/invert on lg circle layer/delete on paper
layer/add drop shadow/merge down/copy/paste element of choice
resize to fit/add drop shadow

activate med circle layer/copy/paste paper of choice/resize
paper/selection/invert on med circle layer/delete on paper
layer/merge down/copy/paste element of choice/resize/add
drop shadow

activate diamond1 layer/copy/paste paper of choice/resize
paper/selection/invert on diamond1 layer/delete on paper
layer/merge down/keep activated/copy/paste closeup tube
of choice/resize to fit/delete/leave frame as is/add drop
shadow

activate diamond2 layer/copy/paste paper of choice/resize
paper/selection/invert on diamond2 layer/delete on paper
layer/merge down/copy/paste element of choice/resize to
fit/leave frame as is/add drop shadow

copy/paste your tube of choice/resize if needed/place your
tag where it will look best/add drop shadow

activate long strip layer/copy/paste paper of choice/resize
paper/selection/invert on long strip layer/delete on paper
layer/merge down/add drop shadow/on word art/choose a paper
go to materials pallet and chose paper pattern/selections
float/defloat on word art layer/fill with pattern/add drop
shadow

activate sm circle layer/copy/paste paper of choice/resize
paper/selection/invert on sm circle layer/delete on paper
layer/merge down/copy/paste element of choice/resize to
fit/leave circle frame as is/add drop shadow

activate wordart2 background/change color from white to
black/activate wordart2 layer/copy/paste paper of choice
delete on paper layer/merge down/merge down again/add
drop shadow

activate wordart3 background/change color from white to
black/activate wordart3 layer/copy/paste paper of choice
delete on paper layer/merge down/merge down again/add
drop shadow

add any other elements you wish to use/resize/add drop
shadow

add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to.... riggsbee53@gmail.com


PTU LadyHawwk Designs and Maxine Gadd

Made For Lovin You
This tutorial was written on February 14,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.




SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Maxine Gadd.
Please do not use unless you have a license to do so.
You can get her tubes HERE
Scrapkit of Choice: I am using PTU LadyHawwk Design Maxine Gadd
IB_20-3....You can purchase it HERE ...Thanks Cat
Template of choice:I am using Twisted Twinky Template Made For
Lovin You.....Twinky no longer has her blog on the net.

please use another template...thanks
Mask of Choice: I am using Vix Mask Valentine #451
You can download it Here...Thanks Vix
Filters used:Eye Candy 4000 gradient glow - HERE
Font for Name is Majestic
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.

     LET'S BEGIN
 
Open up Template and ShiftD and close original...delete
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background



On the following raster layers follow these directions...
activate circle1 layer/copy/paste paper of choice/resize
paper/selection/invert on circle1 layer/delete on paper
layer/copy/paste element of choice/resize/add drop shadow
activate circle2 layer/copy/paste paper of choice/resize
paper/selection/invert on circle2 layer/delete on paper
layer/copy/paste element of choice/resize/add drop shadow
activate circle3 layer/copy/paste paper of choice/resize
paper/selection/invert on circle3 layer/delete on paper
layer/copy/paste element of choice/resize/add drop shadow
activate circle4 layer/copy/paste paper of choice/resize
paper/selection/invert on circle4 layer/delete on paper
layer/copy/paste element of choice/resize/add drop shadow
activate circle5 layer/copy/paste paper of choice/resize
paper/selection/invert on circle5 layer/delete on paper
layer/copy/paste element of choice/resize/add drop shadow
activate double circle layer/copy/paste paper of choice/resize
paper/selection/invert on double circle layer/delete on paper
layer/copy/paste element of choice/resize/place on right side
circle/on left side of circle/copy/paste tube of choice/resize
delete on tube layer/add drop shadow
copy/paste your tube of choice/resize if needed/place your
tag where it will look best/add drop shadow
add any other elements you wish to use/resize if needed/add
drop shadow/resize tag
add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.
You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....
riggsbee53@gmail.com

2/15/13

PTU Tyger Tibits and Alehandra Vanhek

Greek Love
This tutorial was written on February 14,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working

knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.  





SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Alehandra Vanhek.
This is an exclusive for Picsfordesign. You can get her tubes HERE
Scrapkit of Choice: I am using PTU Tyger Tibits Greek Love
You can purchase it HERE ...Thanks Tyger
Cluster Frame of choice:I am using mine frame Greek Love#2
You can download it HERE...Please do not share or claim as your own
Mask of Choice: I am using Vix Big Mask #019
You can download it Here...Thanks Vix
Filters used:Eye Candy 4000 gradient glow - HERE
Font for Name is Redressed
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


     LET'S BEGIN
Open up Template and ShiftD and close original...delete
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background




On the following raster layers follow these directions...
you can either make your own cluster from the kit or use mine.
to make your own/first choose a frame/resize/add any element
you wish to use/resize each element/place your elements where
you want to make them look best/add drop shadow
copy/paste cluster frame/resize if needed/click inside frame
copy/paste background of tube/resize to fit
Copy paste/tube of choice/resize/place on opposite side of the
frame/add drop shadow
add any other elements you wish to use/resize if needed/add
drop shadow/resize tag
add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.
You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....
riggsbee53@gmail.com

2/14/13

PTU Dees'Sign Depot and Danny Drake

Terciera
This tutorial was written on February 14,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.
 

SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Danny Drake.
Please do not use unless you have a license to do so.
You can get her tubes HERE

Scrapkit of Choice: I am using PTU Dees'Sign Depot Terceira
You can purchase it HERE ...Thanks Dee

Template of choice:I am using Additive Pleasure Template #173
You can download it HERE...Thanks Tamie

Mask of Choice: I am using Weescotslass Mask #219
You can download it Here....Thanks Chell

Filters used:Eye Candy 4000 gradient glow - HERE
Font for Name is  Eras Demi ITC
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


     LET'S BEGIN
 
Open up Template and ShiftD and close original...delete
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background


On the following raster layers follow these directions...
activate yellow rectangle1 layer/copy/paste paper of choice
resize paper/selection/invert on yellow rectangle1 layer
delete on paper layer/merge down/keep activated/copy paste
closeup tube of choice/you want the tube in the top right
corner of the layer/delete on paper layer/add drop shadow
add frame of choice/resize/add drop shadow

activate yellow rectangle2 layer/copy/paste paper of choice
resize paper/selection/invert on yellow rectangle layer/delete
on paper layer/merge down/keep activated/copy paste closeup tube
of choice/you want the tube in the bottom left corner of the
layer/delete on paper layer/add drop shadow/add frame of choice
resize/add drop shadow

activate blue rectangle1 layer/copy/paste paper of choice
resize paper/selection/invert on blue rectangle1 layer/delete
on paper layer/merge down/copy paste element of choice/resize
if needed/add drop shadow to both

activate blue rectangle2 layer/copy/paste paper of choice
resize paper/selection/invert on blue rectangle2 layer/delete
on paper layer/merge down/copy paste element of choice/resize

if needed/add drop shadow to both
activate pink rectangle1 layer/copy/paste paper of choice
resize paper/selection/invert on pink rectangle1 layer/delete
on paper layer/merge down/copy paste elements of choice/resize
if needed/add drop shadow to both

activate pink rectangle2 layer/copy/paste paper of choice
resize paper/selection/invert on pink rectangle2 layer/delete
on paper layer/merge down/copy paste elements of choice/resize
if needed/add drop shadow to both

activate circle layer/copy/paste paper of choice/resize paper
selections/invert on circle layer/delete on paper layer/keep
activated/copy/paste large closeup tube/resize so that the
entire tube covers the circle/add drop shadow to both
if the ends of your circle is ragged preset shape tool/with
these settings to make a thin frame for your circle



circle/create on vector/radiusX-274.50/radiusY-274.50/centerX-431.00
centerY-368.00/line-solid/width-8.00/anti-alias-checked

add any other elements you wish to use to make the tag your
own/add drop shadow to all

add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....
riggsbee53@gmail.com


2/12/13

PTU LadyHawwk Designs and Jennifer Janesko

Simply Purple
This tutorial was written on February 12,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Jennifer Janesko.
Please do not use unless you have a license to do so.
You can get his tubes HERE
Scrapkit of Choice: I am using PTU LadyHawwk Designs Simply Purple
You can purchase it HERE ...Thanks Cat
Mask of Choice: I am using Tonya's Temptations Falling Leaves Mask
You can download it Here...Thanks Tonya
Filters used:Eye Candy 4000 gradient glow - HERE
Font for Name is Chopin Script
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.

     LET'S BEGIN
Open up Template and ShiftD and close original...delete
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background



On the following raster layers follow these directions...
copy/paste frame2/resize/place in middle of canvas/magic wand
click inside/selections/modify/expand by 18/copy/paste paper
of choice/selections/invert on frame/delete on paper layer
place paper under frame/keep activated/copy/paste/tube of
choice/make sure tube covers inside of frame/add drop shadow
to both
copy/paste/frame3/resize/place on your right side of first
frame/resize/copy/paste paper of choice/resize to cover frame
place under frame/copy/paste element of choice/resize/place to
fit frame/add drop shadow
copy/paste element 60/place underneath first frame/resize so
that the element can be seen/add drop shadow/copy/paste which
ever word art you wish to use/resize/add drop shadow
add any other elements you wish to use to make you tag your own
resize if needed and add drop shadow
add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.
You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....
riggsbee53@gmail.com

PTU Amy Marie and Al Rio

Heavenly Angel
This tutorial was written on February 11,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Al Rio.
Please do not use unless you have a license to do so.
You can get his tubes HERE
Scrapkit of Choice: I am using PTU Amy Marie Wings Of Love
You can purchase it HERE ...Thanks Amy
Template of choice:I am using Additive Pleasure Template #79
You can download it HERE...Thanks Tamie
Mask of Choice: I am using Enchanted by Darkness Mask #53
You can download it Here...Thanks Rachel
Filters used:Eye Candy 4000 gradient glow - HERE
Font for Name is Redressed
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


     LET'S BEGIN
Open up Template and ShiftD and close original...delete
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background
On the following raster layers follow these directions...
activate rectangle layer/copy/paste/paper of choice/resize paper
selection/invert on circle layer/delete on paper layer/merge down
copy/paste element of choice/resize/add drop shadow to all
activate circle layer/copy/paste paper of choice/resize paper
selections/invert on circle layer/delete on paper layer/merge
down/copy/keep activated/copy/paste tube of choice/resize if
needed/duplicate/on original layer/blend/overlay/on duplicated
layer lower opacity to 70%/add element of choice/resize if
needed/leave dotted circle as is/add drop shadow
activate square layer/copy/paste paper of choice/resize paper
selections/invert on square layer/delete on paper layer/merge
down/keep activated/copy/paste element of choice/resize if
needed/add drop shadow to all
activate square2 layer/copy/paste paper of choice/resize paper
selections/invert on square2 layer/delete on paper layer/merge
down/keep activated/copy/paste elements of choice/resize if
needed/add drop shadow to all
add any other elements you wish to use to make you tag your own
resize if needed and add drop shadow
activate word art/copy/paste paper of choice/selections/invert
on wordart layer/delete on paper layer/add drop shadow to word
art back/add drop shadow
add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.
You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....
riggsbee53@gmail.com


PTU Amy Marie and Barbara Jensen

I'm Your Angel
This tutorial was written on February 11,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Barbara Jensen.
Please do not use unless you have a license to do so.
You can get her tubes HERE
Scrapkit of Choice: I am using PTU Amy Marie Wings Of Love
You can purchase it HERE ...Thank you Amy
Template of choice:I am using Additive Pleasure Template #54
You can download it HERE...Thanks Tamie
Mask of Choice: I am using Dees'Sign Depot Mask #22
You can download it Here...Thanks Dee
Filters used:Eye Candy 4000 gradient glow - HERE
Font for Name is Ribbon of Hope
Copy write is always done in Pixelette  HERE

Dropshadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


     LET'S BEGIN
Open up Template and ShiftD and close original...delete
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background
On the following raster layers follow these directions...
recolor all element to match your tube
leave glittered circle as is/activate circle layer/copy/paste
paper of choice/resize paper/selection/invert on circle layer
delete on paper layer/merge down/keep activated/copy/paste/close
up tube/resize to fit circle/delete on tube layer/duplicate on
original layer/blend/overlay/place duplicate layer underneath
original tube/lower opacity to 60%/add drop shadow to all
leave glittered rectangle as is/activate rectangle layer/copy
paste paper of choice/resize paper/selections/invert on rectangle
layer/delete on paper layer/merge down/copy/paste elements of
choice/resize if needed/add drop shadow/copy/paste main tube
resize if needed/place on top of elements/add drop shadow
leave glittered circle2 as is/activate circle2 layer/copy/paste
paper of choice/resize paper/selections/invert on circle2 layer
delete on paper layer/merge down/keep activated/copy/paste close
up tube again/resize to fit circle/delete/add drop shadow
delete the following layers/heart/glittered heart2/heart2/heart3
hearts and hearts2
leave glittered strip layer as is/activate strip layer/copy/paste
paper of choice/resize paper/selection/invert on strip layer/delete
on paper layer/merge down/add drop shadow
leave glittered heart as is/copy/paste a heart from the kit/resize
if needed/recolor if needed/add drop shadow/recolor word art to
match tag
add any other elements you wish to use to make you tag your own
resize if needed and add drop shadow
add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.
You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....
riggsbee53@gmail.com


2/8/13

PTU Hungry Hills and Zindy Nielsen

Dark Mistress
This tutorial was written on February 8,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Zindy Nelsen.
Please do not use unless you have a license to do so.
You can get her tubes HERE
Scrapkit of Choice: I am using PTU Dark Romance
You can purchase it HERE ...Thank you Ali
Mask of Choice: I am using Weescotlass #105
You can download it Here...Thanks Chell
Filters used:Eye Candy 4000 gradient glow - HERE
Font for Name is Kingthings Petrock
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make
the tag your own you do not have to use any of the supplies I
used.With this tutorial you will be making a cluster frame first.


     LET'S BEGIN
Open up Template and ShiftD and close original...delete
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background
On the following raster layers follow these directions...
To begin you need to make a cluster frame,because I can not
supply the one I made/copy/paste frame of choice/now choose
any elements you want to make the frame/be creative/every
tag should be different,but yet similar to mine/add drop
shadow to each element
once your cluster is made/copy/paste either a paper or add
new layer/add color from the tube/if you use a paper/copy/paste
paper/resize paper/selections/modify/expand by 8/invert
on frame layer/delete on paper layer/place underneath frame
add drop shadow to frame
keep this layer activated/copy/paste tube of choice/resize
if needed/place where it will look best/add drop shadow
add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.
You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....
riggsbee53@gmail.com

2/7/13

PTU Amy Marie and Eugene Rzhveskii

Rock Me
This tutorial was written on February 6,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other

Paint Shop Pro versions.


SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Eugene Rzhveskii.
Please do not use unless you have a license to do so.
You can get her tubes HERE
Scrapkit of Choice: I am using PTU Amy Marie Rock Me
You can purchase it HERE ...thank you Amy
Template of choice:I am using Additive Pleasure Template #174
You can download it HERE...Thanks Tamie
Mask of Choice: I am using Vix Mask #349
You can download it Here...Thanks Vix
Filters used:Eye Candy 4000 gradient glow - HERE
Font for Name is Accent SF
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to use any
of the supplies I used.


     LET'S BEGIN
Open up Template and ShiftD and close original...delete
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background
On the following raster layers follow these directions...
activate  angle rectangle layer/copy/paste paper of choice
resize paper/selection/invert on rectangle layer/delete on
paper layer/merge down/copy/paste element of choice/resize
if needed/add drop shadow to both
activate long rectangle layer/copy/paste paper of choice
resize paper/selection/invert on long rectangle layer/delete
on paper layer/merge down/add drop shadow
activate rectangle layer/copy/paste paper of choice/resize
paper/selection/invert on rectangle layer/delete on paper
layer/merge down/copy/paste element of choice/resize if
needed/add drop shadow to both
activate thin rectangle layer/copy/paste paper of choice/resize
paper/selection/invert on thin rectangle layer/delete on paper
layer/merge down/add drop shadow
activate large circle layer/copy/paste paper of choice/resize
paper/selection/invert on large circle layer/delete on paper
layer/merge down/keep activated/copy/paste tube of choice/resize
to fit/delete on tube layer/duplicate/on original/blend/overlay
place duplicate layer underneath original/add drop shadow to all
activate smaller circle/copy/pase paper of choice/resize paper
selections/invert on smaller circle layer/delete on paper layer
merge down/copy/paste element of choice/resize to fit/add drop
shadow/circle frames as is/add drop shadow
activate medium circle layer/copy/paste paper of choice/resize
paper/selection/invert on medium circle layer/delete on paper
layer/merge down/keep activated/copy/paste tube again/resize
delete on tube layer/on original layer/blend/screen/place
duplicated layer/underneath original/add drop shadow to all
copy/paste your tube of choice/resize if needed/place your
tag where it will look best/add drop shadow
add any other elements you wish to use/resize if needed/add
drop shadow to elements/add any word art/resize if needed/add
drop shadow
add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.
You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....
riggsbee53@gmail.com


PTU Toxic Desirez and Elias Chatzoudis

Play That Funky Music
This tutorial was written on February 6, 2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Elias Chatzoudis.
Please do not use unless you have a license to do so.
You can get his tubes HERE

Scrapkit of Choice: I am using PTU Toxic Desirez - Rock On
You can purchase it HERE ...Kristin

Template of choice:I am using AmyLeahsGimptasticTuts #15
You can download it HERE...Thanks Leah

Mask of Choice: I am using Tonya Mask #31
You can download it Here...Thanks Tonya

Filters used:Eye Candy 4000 gradient glow - HERE
Font for Name is New Romantics
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


     LET'S BEGIN
 
Open up Template and ShiftD and close original...delete
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background



On the following raster layers follow these directions...
activate small square layer/copy/paste paper of choice/resize
paper/selections/invert on square layer/delete on paper
layer/merge down/add drop shadow

activate square2 layer/copy/paste paper of choice/resize
paper/selections/invert on square2 layer/delete on paper
layer/merge down/add drop shadow/copy/paste element of
choice/resize to fit/merge down/leave frame as is/add
drop shadow

activate square1 layer/copy/paste paper of choice/resize
paper/selections/invert on square1 layer/delete on paper
layer/merge down/copy/paste element of choice/duplicate
place side by side/merge down/add drop shadow to both
activate rec2 layer/copy/paste paper of choice/resize paper
selections/invert on rec2 layer/delete on paper layer/merge
down/add drop shadow

activate rec1 layer/copy/paste paper of choice/resize paper
selections/invert on rec1 layer/delete on paper layer/merge
down/add drop shadow

activate circle3 layer/copy/paste paper of choice/resize paper
selections/invert on circle3 layer/delete on paper layer/merge
down/copy/paste element of choice/resize/add drop shadows
activate circle2 back layer/copy/paste paper of choice/resize
paper/selections/invert on circle2 back layer/delete on paper
layer/merge down/add drop shadow

activate circle2 layer/copy/paste paper of choice/resize paper
selections/invert on circle2 layer/delete on paper layer/keep
activated/copy/paste tube closeup/resize if needed/duplicate
on original/blend/screen/on duplicate place underneath original
add drop shadows

activate circle1 back layer/copy/paste paper of choice/resize
paper/selections/invert on circle1 back layer/delete on paper
layer/merge down/add drop shadow

activate circle1 layer/copy/paste paper of choice/resize paper
selections/invert on circle1 layer/delete on paper layer/keep
activated/copy/paste tube closeup/resize if needed/duplicate
on original/blend/soft light/on duplicate place underneath
original/add drop shadows

copy/paste your main tube of choice/resize if needed/place your
tag where it will look best/add drop shadow

add any other elements you want to make it your own/resize if
needed/add drop shadows

add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.
You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....
riggsbee53@gmail.com

2/6/13

PTU Rebel Dezigns and Martin Abel

Putting on the Ritz
This tutorial was written on February 5,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.







SUPPLIES NEEDED


Tube of choice: I'm using the awesome work of Martin Abel.
Please do not use unless you have a license to do so.
You can get his tubes HERE
Scrapkit of Choice: I am using PTU Rebel Dezigns Glitzy Ritzy
You can purchase it HERE ...Rene'

Template of choice:I am using AquaRebel315 #58
You can download it HERE...Thanks Aqua
Mask of Choice: mask is included on template 
Filters used:Eye Candy 4000 gradient glow - HERE
Font for Name is  Scrappy Script
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


     LET'S BEGIN
On the following raster layers follow these directions...

recolor mask/leave silver and white glittered circle as is
activate grad circle layer/copy/paste paper of choice/resize
selections/invert on circle layer/delete on paper layer/merge
down/add drop shadow to glittered circles/copy/paste/element
of choice/add drop shadow

leave shape layer as is/leave white and silver squares as is
change grad squares 1-4 to match the tag/keep activated/copy
paste tube closeup of choice/selections/delete on tube layer
duplicate/on original layer/blend/screen on square 1 and 3
on square 2 and 4/blend overlay/place duplicate layers under
neath/add drop shadow to both tubes

copy/paste your tube of choice/resize if needed/place on your
tag where it will look best/add drop shadow/leave word art
and word art background as is/add drop shadow

now add any more elements to your tag to make it your own
resize if needed/add drop shadow to each element

add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to.... riggsbee53@gmail.com


PTU Foxy's Designz and Barbara Jensen

All 4Love
This tutorial was written on February 05,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.




SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Barbara Jensen.
Please do not use unless you have a license to do so.
You can get her tubes HERE

Scrapkit of Choice: I am using PTU Foxy's Design All 4Love
You can purchase it HERE ... Thanks Foxy

Mask of Choice: I am using Weescotlass Mask #241
You can download it Here...Thanks Chell

Filters used:Eye Candy 4000 gradient glow - HERE
Font for Name is Majestic
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


     LET'S BEGIN

Open frame layer #3/resize by 900x900/we will resize later
Copy/paste paper of choice/layers/load/save mask with
these setting/click ok/layers/merge group

magic wand/click inside frame/selections/modify/expand
by 10/copy/paste paper of choice/invert on frame layer
delete on paper layer/move paper underneath frame/keep
activated/copy/paste closeup tube of choice/resize so that
the inside of the frame is covered/delete on tube layer
duplicate/on original/blend/screen/place duplicate under
neath original/add drop shadow to both tubes and frame


copy/paste/element 41 and place on top/resize to fit
lower opacity to 40%

copy/paste element #21/place over top mask layer/resize if
needed/add a slight drop shadow

add any other elements on the right hand side of the frame
to make a cluster/resize each element if needed/add drop
shadow to each element


once that's complete and your satisfied
with the way it looks/copy paste your main tube and place
on left side of frame/resize if needed/add drop shadow

add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.
You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....
riggsbee53@gmail.com


2/1/13

PTU Dees'Sign Depot and Marika

Tweet Heart  

This tutorial was written on February 1,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.




SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Marika.
Please do not use unless you have a license to do so.
You can get her tubes HERE

Scrapkit of Choice: I am using PTU Dees'Sign Depot Tweetheart
You can purchase it HERE ...Thanks Dee

Template of choice:I am using Additive Pleasure Template #99
You can download it HERE...Thanks Tamie

Mask of Choice: I am using Laurie made me scraps Ir Mask #125
You can download it Here...Thanks Laurie
Filters used:Eye Candy 4000 gradient glow - HERE
Font for Name is Forte
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


     LET'S BEGIN

Open up Template and ShiftD and close original...delete
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background


On the following raster layers follow these directions...
activate lg circle layer/copy/paste paper of choice/resize
paper/selection/invert on circle layer/delete on paper
layer/keep activated/copy/paste tube of choice/resize if
needed/invert on circle/delete on tube layer/add drop shadow

activate long rectangle layer/copy/paste paper of choice/resize
paper/selection/invert on rectangle layer/delete on paper layer
merge down/add drop shadow/copy/paste element of choice/resize
place near the top of rectangle/add drop shadow

activate bottom rectangle layer/copy/paste paper of choice
resize paper/selection/invert on rectangle layer/delete on paper
layer/merge down/add drop shadow

activate square layer/copy/paste paper of choice/resize paper
selection/invert on square layer/delete on paper layer/merge
down/copy/paste element of choice/resize if needed/place in
the middle/add drop shadow to both

copy/paste word art "be my tweetheart"/copy/paste glitter paper
of choice/resize/selections/select all/float/unfloat/invert on

word art layer/delete on paper layer/merge down/effects/eye candy
gradient glow on fat setting

activate slanted rectangle layer/copy/paste paper of choice
resize paper/selection/invert on rectangle layer/delete on paper
layer/merge down/add drop shadow

activate circle layer/copy/paste paper of choice/resize paper
selection/invert on circle layer/delete on paper layer/keep
activated/copy/paste tube of choice/resize if needed/invert
on circle/delete on tube layer/duplicate/on original layer
blend/screen/on duplicate layer lower opacity to 54/leave
circle layer as is/add drop shadow to all

activate square2 layer/copy/paste paper of choice/resize paper
selection/invert on square layer/delete on paper layer/merge
down/copy/paste element of choice/resize if needed/place in
the middle/leave frame as is/add drop shadow to both

add any other elements you wish to use/resize if needed/add
drop shadow

copy/paste your main tube of choice/resize if needed/place your
tag where it will look best/add drop shadow

add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.
You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....
riggsbee53@gmail.com