12/29/12

FTU Fantasy Moments and Elias Chatzoudis

Cold As Ice
This tutorial was written on December 28,2012.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Elias Chatzoudis .
Please do not use unless you have a license to do so.
You can get his tubes HERE
Scrapkit of Choice: I am using FTU Fantasy Moments Winter Dreams
You can purchase it HERE ...Sylvie
Template of choice:I am using Toxic Desire Template 158
You can download it HERE...Thank you Kristin
Mask of Choice: I am using Vixpsp Christmas mask #4
You can download it Here...Thanks Vix
Filters used:Eye Candy 4000 gradient glow - HERE
Font for Name is Santas Sleigh Full Bold
Copy write is always done in Pixelette  HERE

Dropshadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


     LET'S BEGIN
Open up Template and ShiftD and close original...delete
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background
On the following raster layers follow these directions...
activate left rectangle layer/copy/paste paper of choice
resize/selection/invert on left rectangle layer/delete on
paper layer/add drop shadow
activate right rectangle layer/copy/paste paper of choice
resize/selection/invert on right rectangle layer/delete on
paper layer/add drop shadow
activate left circle layer/copy/paste paper of choice
resize/selection/invert on left circle layer/delete on
paper layer/add drop shadow
activate right circle layer/copy/paste paper
of choiceresize/selection/invert on right
circle layer/delete on paper layer/add drop shadow
copy/paste element of choice/resize/place on both circle
layers/add drop shadow
activate rectangle layer/copy/paste paper of choice/resize
selection/invert on rectangle layer/delete on paper layer
add drop shadow/copy paste another element of choice/resize
add drop shadow/duplicate/mirror
activate left circle2 layer/copy/paste paper of choice
resize/selection/invert on left circle2 layer/delete on
paper layer/keep activated/copy/paste tube of choice
you want a close up of the face/selection/invert on circle
delete on tube/duplicate tube/on orignal tube/blend soft

light/on duplicate tube lower opacity to 50%/add drop shadow
to both tubes
activate right circle2 layer/copy/paste paper of choice
resize/selection/invert on right circle2 layer/delete on
paper layer/keep activated/copy/paste tube of choice
you want a close up of the face/selection/invert on circle
delete on tube/duplicate tube/on orignal tube/blend soft
light/on duplicate tube lower opacity to 50%/add drop shadow
to both tubes
activate left square layer/copy/paste paper of choice/resize
selection/invert on left square layer/delete on paper layer
keep activated/copy/paste tube of choice you want a larger
part of the face/selection/invert on square layer/delete on
tube layer/duplicate tube/on orignal tube/blend/screen/on
duplicate tube/lower opacity to 50%/add drop shadow to both

tubes
activate right square layer/copy/paste paper of choice/resize
selection/invert on right square layer/delete on paper layer
keep activated/copy/paste tube of choice you want a larger
part of the face/selection/invert on square layer/delete on
tube layer/duplicate tube/on orignal tube/blend/screen/on
duplicate tube/lower opacity to 50%/add drop shadow to both
tubes/on snowflake layer change to white
activate circle1 layer/color circle to match tag/color glitter
circle layer to match tag/on circle2/color this tag to match
tag also/keep activated/copy/paste element of choice/resize to
fit circle/now copy/paste tube/selection/invert on circle2 layer
delete on tube layer/now place wordart on top/add drop shadow
to element and tube layer
leave thin glitter rectangle layer as is/on thin rectangle layer
change color to match tag/add drop shadow/leave words as is/also
leave snowflakes as is/add main tube/resize if needed/add an
element to the bottom to hide the cut off/add drop shadow
add your watermark and copyright credits/give it a slight gradient
glow ...now give your tag to a friend.
You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....
riggsbee53@gmail.com


FTU Bel Vidotti Scraps and Keith Garvey

I'll Melt your Hard Drive

This tutorial was written on December 28,2012.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other

Paint Shop Pro versions.


SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Keith Garvey .
Please do not use unless you have a license to do so.
You can get his tubes HERE
Scrapkit of Choice: I am using FTU Bel Vidotti Scraps Soft
Holiday...Sorry her blog has been
removed please use another scrapkit ...thanks
Template of choice:I am using Kan dee 4 a collab for
Misfit Winter Blog Train.
You can download it HERE...Thank you Kandi and Dee
Mask of Choice: I am using no mask
Filters used:Eye Candy 4000 gradient glow - HERE
Font for Name is Santas Sleigh Full Bold
Copy write is always done in Pixelette  HERE

Dropshadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


     LET'S BEGIN
Open up Template and ShiftD and close original...delete
copyright layer/delete background

On the following raster layers follow these directions...
leave dotted rectangle layer as is/activate left blue
rectangle layer/copy/paste paper of choice/resize
selection/invert on left rectangle layer/delete on
paper layer/add element of choice/resize if needed
add drop shadow to both

activate right blue rectangle layer/copy/paste paper
of choice/resize/selection/invert on right rectangle
layer/delete on paper layer/add element of choice
resize if needed/add drop shadow to both

activate blue strip layer/copy/paste paper of choice
resize/selection/invert on blue strip layer/delete on
paper layer/copy/paste element of choice/resize to fit
add drop shadow

activate pink mat layer/give it a darker color of pink
copy/paste element of choice/resize to fit/add drop shadow

activate pink circle layer/copy/paste paper of choice
resize/selection/invert on pink circle layer/delete on
paper layer/copy/paste tube of choice/resize/duplicate
on orignal layer/blend/screen/on duplicate layer lower
opacity to 75%/add drop shadow to both/circle frame as is

activate both circles layer/copy/paste paper of choice
resize/selection/invert on circle layer/delete on paper
layer/keep activated/copy paste the face part of the tube
into the circle/duplicate/mirror/add drop shadow

activate blue shape/color the shapes a dark and light
color pink/add drop shadow

add main tube of choice/place where it will look best
add drop shadow

add any other element you wish to use to make the tag
you're own/leave everything else as is/add drop shadow
you can add a word to the snowman or not/I used font
Alaskan Nights and added a inner bevel

add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my
blog/ send to
.... riggsbee53@gmail.com




PTU Foxy's Designz and Jessica Dougherty

Winter Frost
This tutorial was written on December 28 2012.
Any similarities to another tutorial is
purely coincidental.All my tutorial are
register with My Free Copyright. Please do
not claim as your own.This tutorial writer
assumes you have a working knowledge of
using Paint Shop Pro.This tutorial was done
in Paint Shop Pro9,but can be adapted to
use in other Paint Shop Pro versions.





SUPPLIES NEEDED
Tube of Choice: The artwork of Jessica Dougherty.
You can purchase her artwork HERE
Please do not use without a license to do so
Scrapkit of Choice: I'm using Foxy's Designs PTU Winter Frost
You can purchase the kit Here  Thank you Foxy
Template of Choice: Lithium Flower Snowflake Template
You can download  Here
Thank you Lithium
Filters used:Eye Candy 4000 gradient glow - HERE
Font for name is Noel and copy write is
always done in Pixelette ... Get them HERE
Dropshadow use through out H-2/V-2/O-65/B-6.00
Please leave a thank you when you downloading for
supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to use any
of the supplies I used.

 LET'S BEGIN

Forum Tag
Open up Template and ShiftD and close original...delete
copyright layer/close all layers/except background layer
activate top wide stripe layer/copy/paste paper of choice
resize/selection/invert on top wide stripe layer/delete
on paper layer/merge down/add drop shadow
In this next section you will choose two colors from either
the tube or the scrap kit/a dark and light color/there are
seven stripes/you will alternate the colors on each layer
after you color each stripe/adjust/add/remove noise/add
noise with setting on each layer



Activate black rectangle layer/copy/paste paper of choice
resize paper/selection/invert on rectangle layer/delete
on paper layer/keep activated/copy/paste tube of choice
place the tube where you want it to show/resize/delete
on tube layer/add drop shadow
leave white frame as is/adjust/add/remove noise/add
noise with same settings as above/add drop shadow
activate bottom wide stripe layer/copy/paste paper of choice
resize/selection/invert on bottom wide stripe layer/delete
on paper layer/merge down/add drop shadow
now delete the four snowflakes and replace with four snow
flakes from the kit/resize each snowflake as needed and
place in the same location as the other snowflakes/add
drop shadow
activate border/color the border to match the tag/add drop
shadow/copy/paste tube of choice/resize/place where it
will look best/add down shadow
now add any other elements you wish to use/resize if needed
remember to add drop shadow to each element
add copyright and watermark and a friend's name

Avatar
open new raster layer/150x150
Shift/D your tag/on the duplicate tag/take your crop tool
and go to the right side and draw a rectangle 150x150/there
will be some layers that you do not need/delete them/add
any element you wish to use/add copyright/license number
and first letter of name or the name itself

now give your set to a friend.

Animation
Now you can choose to animate or not/you will need Jasc
Animation Shop/and a falling snow animation/you can
download the one I have or use your own/open up animation
shop/copy/merge your tag and paste to animation shop/ go to
your file and find the animation/open it up in animation
shop/on your tag duplicate 10x/resize the animation bling
on the width at 600/edit/select all/go to tag and paste
into selected frame/view animation/if it's fine then save
as gif
You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

riggsbee53@gmail.com
  


12/3/12

PTU LadyHawwk Designs and Jennifer Janesko

Baby It's Cold Outside
This tutorial was written on December 3,2012.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.

 

SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Jessica Janesko .
Please do not use unless you have a license to do so.
You can get her tubes HERE

Scrapkit of Choice: I am using Ladyhawwk Designs IB-JJ 146-1
You can purchase it HERE ...Cathy

Template of choice:I am using Additive Pleasures Winter #9
You can download it HERE...Thank you Tamie

Mask of Choice: I am using Vix Mask #248
You can download it Here...Thank you Vix

Filters used: Eye Candy 4000 gradient glow - HERE

Font for Name is Santa's Sleigh
Copy write is always done in Pixelette HERE


Dropshadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


LET'S BEGIN

Open up Template and ShiftD and close original...delete
copyright layer/close all layers/copy/paste paper of choice
layers/load/save mask/locate mask/set with these settings
below/click ok



On the following raster layers follow these directions...

activate glittered rectangle layer/change color to match tag

activate rectangle layer/copy/paste paper of choice/resize
selection/invert/on rectangle layer/delete on paper layer/add
drop shadow/dotted rectangle layer as is/glitter circle and
glitter strip as is/add drop shadow

activate strip layer/copy/paste paper of choice/resize/selection
invert/on strip layer/delete on paper layer/add drop shadow

activate the left half of the circle layer/copy/paste paper of
choice/resize/selection/invert/on circle layer/delete on paper
layer/add drop shadow/keep activated/copy/paste tube of choice
invert on circle layer/delete on tube layer/duplicate/ on orignal
layer/blend/overlay/on duplicated layer/lower opacity to 60%
add drop shadow to both

change color of dotted circle/small glitter circle/small circle
glitter word art/word art2 and text2 to match

add any other elements to make your tag your own/add drop
shadow on each element/resize your tag

copy/paste main tube/resize if needed/place where it will
 look best/add drop shadow to tube

add your watermark and copyright credits/give it a
 slight gradient glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial

please send me a copy so that I can show case
 it on my blog send to.... riggsbee53@gmail.com







PTU Hungry Hills Scraps and Dirk Richter

Joy
This tutorial was written on December 2,2012.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Dirk Richter .
Please do not use unless you have a license to do so.
You can get her tubes HERE

Scrapkit of Choice: I am using Dirk Richter Tube/Bundle 7-2
This isno longer at CDO, please use another scrap kit

Template of choice:I am using Toxic Desirez #168
You can download it HERE...Thank you Kristin

Mask of Choice: I am using mask Vix #331
You can download it Here...Thank you Vix

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Biondi
Copy write is always done in Pixelette HERE

Dropshadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


LET'S BEGIN

Open up Template and ShiftD and close original...copy/paste
paper of choice/resize to fit/layer/load/save mask/find your
mask/select/using these setting/click ok/merge group



On the following raster layers follow these directions...

activate left square layer/copy/paste paper of choice/resize
selection/invert on left square layer/delete on paper layer
add drop shadow

activate right square layer/copy/paste paper of choice/resize
selection/invert on right square layer/delete on paper layer
add drop shadow

copy/paste element of choice/resize if needed/add drop shadow

activate pink top layer/copy/paste paper of choice/resize/invert
on pink top layer/delete on paper layer/keep activated/copy
paste element of choice/resize to fit/deactivate/add drop shadow

activate pink bottom layer/copy/paste paper of choice/resize
invert on pink bottomlayer/delete on paper layer/keep activated
copy/paste element of choice/resize to fit/deactivate/add drop
shadow

activate blue top rectangle layer/copy/paste paper of choice/resize
invert on blue top rectangle layer/delete on paper layer/add
drop shadow

activate blue bottom rectangle layer/copy/paste paper of choice
resize/invert on blue bottom rectangle layer/delete on paper layer
add drop shadow

activate rounded rectangle/keep as is/copy/paste element of choice
resize if needed/add drop shadow

activate circle layer/change color to match your tag/copy/paste
round word art/ resize to fit/adjust/sharpen/lower opacity to 30%
keep activiated/copy/paste closeup tube/resize/selection/invert
on circle layer/delete on tube layer/add drop shadow

copy/paste main tube/mirror/resize/place where you want it/add
drop shadow

now add any other elements you wish to use/resize if needed/remember
to add drop shadow to each element

add your watermark and copyright credits/give it a slight gradient
glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog