7/21/10

PTU Tyger Tibits and David Desbois - Shut Up and Drive

Shut Up and Drive

This tutorial was written on July 20th 2010.This is a really simply to do tutorial.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. Please do not claim as your own.
This tutorial writer assumes you have a working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9, but can be adapted to use in other
Paint Shop Pro versions.



SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of David Deb..
You can go here to check out his artwork HERE..Please make sure you have permission to use.


Scrapkit or colors of your choice, I'm using Shut Up and Drive PTU kit from Tyger Tidbits
you can get it HERE....thank you Tyger

Mask of Choice: I'm using Vix #100 ..You can find it HERE
Put mask in mask folder..Thanks so much for the use of your mask Vix

Font for name is Ajile and copy write is always done in Pixelette ... Get them HERE

Drop shadow use throughout H-1/V-1/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

     LET'S BEGIN

Open up a new raster layer 700x700 transparency

Choose a paper of choice/copy/paste...now go to layers/Load/
save mask/load mask from disk/ and find your mask of choice...with these setting
see photo below....go to layers/merge group

open up the highway and copy/paste as a new layer/take your raster deform tool and strecth
out to the size you want/ now give it a drop shadow.

open up the yellow race car and shift/d to get a new layer. I added a few elements to the car,
but you don't have too...once you finish adding elements merge your layer and copy/paste to the
canvas we're working on...place it at the end of the road.

now find the tube you want to use..I chose Alice..open up the frame and adjust the frame
around the tube... now open up a paper of choice for the back ground of the frame.
make frame active and copy/paste paper as a new layer...go to frame layer/selections/invert
and go to paper layer and delete...add a drop shadow to the frame.

now add some elements to your tag/ add a drop shadow to each element...
once that's done place your framed picture behind the car.
You can add some word art or not..it's up to you.
I added a call box from preset shapes and added the words that 
Alice said to Edward when she
took Bella to protect her from the hunter

add your copyright and watermark and give to a friend

You're done!!!
Thanks for trying my tutorial
If you use send me a copy so I can show case it...thanks

7/20/10

CT Call For The North Wing Asylum



You must be able to write a new tutorial at least once a month using a kit from our store.
You may choose from any designer in the store, but preferably you will work with all designers and not favor just one!
You must be Copyright Compliant.
You must agree NEVER to share our PTU kits with others.
You shall provide links and tags to our Gallery Leader for display!
All tutorials will be checked by the CT leader before being added!

You must agree to display the store blinkie on your blog or tut site
All tutorials will be displayed in our gallery and in our CT blog

7/17/10

FTU Queen Brat Designs and Ismael Rac - Attitude

Attitude

This tutorial was written on July 17, 2010.Any similarities to 
another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. Please do not claim as your own.
This tutorial writer assumes you have a working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,but can be adapted to use in other
Paint Shop Pro versions.

 


SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Ismael Rac ..You can purchase his tubes HERE
Please do not use without a license to do so

Scrapkit or colors of your choice, I'm using Queen Brat Designs..It's A Girl Thing. you can get it HERE....thank you Queen

Template of Choice: I am using one of Missy & Rachael color template#3..you can get it HERE...Thanks ladies

Font for name is Papyrus and copy write is always done in Pixelette ... Get them HERE

Effects DBS - Linear Transmission...it's a free filter, you can get it HERE

Drop shadow use throughout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

     LET'S BEGIN

Open up Template and ShiftD and close original...delete copyright layer
delete the background layer

activate the large glitter circle layer/select the pink side only/copy/paste paper of choice
while circle layer is active go to selection/invert...then go to paper layer and delete
selections none/layers/merge/merge down...now go to adjust/add/remove noise/add noise
with these setting -insert photo.

duplicate large glitter circle and go to effect dbs linear transmission with these setting



now move it over to the left just a bit...and place underneath original glitter layer
I left the large circle as is..you can change it if you so desire...add a drop
shadow to the top glitter circle.

recolor the top of your frame back so that it matches your tag. leave the white frame as is.
now activate your frame back /copy/paste a close up tube of your choosing.go to selection
invert/ then go to tube layer and delete.color your dotted line to match your tag.

now activate your rectangle layer/cop/paste paper of choice.while still on the rectangle
layer go to selections/invert then go back to paper layer and hit delete. add drop shadow
change the color of pink rectangle to match your tag...leave black rectangle as is.

now we're going to do the small circle the same way we did the large glitter circle. activae
circle/cop/paste paper of choice...go back to circle layer and selection invert/got to paper
layer and hit delete....remember to resize all paper so there are no shadows showing when you
saved your tag...layers/merge/merge down...duplicate small circle layer and on the copy layer
go to dbs linear transmission with the same setting as before...put the copy layer underneath
the small circle layer...add drop shadow to the original small circle layer.

leave the glittered circle layer as is and on the small circle layer change the color to match
your tag...on the word art I also change the color on the two letters.now you can add your
main tube and place it where it looks best to you....don't forget to give it and your elements
a drop shadow...add any elements you wish your tag to have to make it your own.
add your copyright and watermark..and give your friend a tag.

You're done!!!
Thanks for trying my tutorial
If you use send me a copy so I can show case it...thanks

FTU Dark Yarrow and Robert Alvarado - Feeling Funky

Feeling Funky

This tutorial was written July 16, 2010. Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. Please do not claim as your own.
This tutorial writer assumes you have a working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,but can be adapted to use in other
Paint Shop Pro versions.



SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Robert Alvarado..
You can purchase his tubes HERE
Please do not use without a license to do so

Scrapkit or colors of your choice, I'm using Dark Yarrow FTU kit Sweet. you can get it HERE
thank you Yarrow

Mask and Template of Choice: Vix has a goodie bag with mask,templates and word art...both the
mask and template came from Vix-Mask-GBso902 and template GB05...thanks Vix

Get It HERE

Font for name is Poor Richard and copy write is always done in Pixelette ... Get them HERE

Drop shadow use througout H-2/V-2/O-50/B-6.72

Please leave a thank you when you downloading for supplies.

     LET'S BEGIN

Open up Template and ShiftD and close original...delete copyright layer
close all layers except the background layer...the one we'll be working on

load your mask into PSP/Choose a paper of choice/copy/paste...now go to layers/new mask layers/
from image/source window/ and find your mask of choice/create mask from source luminance
click ok....go to layers/merge group

now make circle layer active/selection/modify/smooth with these setting(see photo below)
choose paper of choice/ now resize to fit cirlce go to selection/invert
and click ok/go to paper layer and delete/layers/merge/merge down
keep actvated...copy/paste the close up tube and arrange to your liking.
while still on the circle layer go to selections invert/ then go to tube layer and delete
de-activate/add drop shadow.


now we're going to activate the top left layer/ I left this one the color it was
activate the top right layer/use smooth process/copy/paste paper of choice
while still on the top right layer go to selections invert/ then go to paper layer and delete
layers/merge/merge down/add drop shadow

go to the bottom left and bottom right layer and repeat the same process as you did with the
previous layer...give each layer a drop shadow

now come the great part....it's time to decorate...you can either follow my tag or you can use
whatever element you chose to use. I used the flower,two bows,butterfly and bee
make sure you add a drop shadow to each element...I used H-1/V-1/H40/B-5.00

add your main tube and place where you think it will look best...give a drop shadow
add your copyright and water mark
if you're adding a name go to text tool and find your font. once you type the name
go to Eyecandy4000- Gradient Glow with these setting...see below


 

You're done!!!
Thanks for trying my tutorial
If you use send me a copy so I can show case it...thanks

7/16/10

PTU Hungry Hill and Susanne Woolcott

This tutorial was written on July 15,2010.
Any similarities to another tutorial is purely coincidental.

All my tutorial are register with My Free Copyright.
Please do not claim as your own.

This tutorial writer assumes you have a working knowledge
of using Paint Shop Pro and Animation Shop

This tutorial was done in Paint Shop Pro9,but can be adapted 
to use in other Paint Shop Pro versions.




                                                                  SUPPLIES NEEDED

                     Tube of Choice: I am using the awesome artwork of Suzanne Woolcott..
You can purchase her tubes HERE 
  Please do not use without a license to do so



Scrapkit or colors of your choice, I'm using Sarah Hungry Hill Puddles PTU kit. 
No longer available  ... thank you Sarah



Mask of Choice: I'm using one of Sunf from Urban Fairytales # 20..You can find it HERE

Put mask in mask folder..Thanks so much for the use of your mask


Template of Choice: I am using one of Sara's from Sinful Pleasures #20..you can get it HERE...Thanks Sara

Font for name is Papyrus and copy write is always done in Pixelette ... Get them HERE

Effects Sqirlz Water Reflections...it's a free filter, you can get it HERE

Drop shadow use throughout H-2/V-2/O-50/B-6.72

Please leave a thank you when you downloading for supplies.






     LET'S BEGIN



Open up Template and ShiftD and close original...delete copyright layer
close all layers except the background layer...the one we'll be working on

Choose a paper of choice(I chose paper #4)/copy/paste...now go to layers/Load/
save mask/load mask from disk/ and find your mask of choice...with these setting
see photo below....go to layers/merge group/resize by 80%



Puddles


now make circle layer active/selection/modify/smooth with these setting(see photo below)
choose paper of choice(I chose paper #6) now resize to 
fit circle go to selection/invert and click ok/go to paper layer and delete/layers
merge/merge down/keep activated...copy/paste the word art on top of circle layer
while still on the circle layer go to selections invert/ then go to word art layer and delete
de-activate/add drop shadow.




now we're going to activate the rectangle layer and copy/paste your paper of choice
while still on the rectangle layer go to selections invert/ then go to paper layer and delete
layers/merge/merge down/add drop shadow

go to the rectangle2 and rectangle3 layer and repeat the same process as you did with the
previous layer...do the same with ribbon1 and ribbon2
make sure you resize all your layers by 80% after each copy/paste

now come the great part....it's time to decorate...you can either follow my tag or you can use
whatever element you chose to use. I used the water,ducks,tree,cloud w/ sun and tag
make sure you add a drop shadow to each element...I used H-1/V-1/H40/B-5.00

To animate or not is up to you..the filter is very easy to follow,but I will try to explain it.

ok because I wanted the water puddle to be animated and have it rain too...I used the
Sqirlz Water Reflections filter...first you need to close off your three ducks if you're
using them. Copy merge your tag and paste as a new layer...now save this tag as a jpg.
Now open up the filter and go to open and find your tag.Once the tag comes up, go to
reflect option/customize rain/snow with these setting

number of raindrops/snowflakes-1967
Length-70   brightness-255    softness-100
Depth of field-10    width-2    speed 0.4
transparency-50   direction variation-0   direction-213

now click on the Y picture and click on rain/snow/ripple combination
next click on the red ring and draw a line around the water area
once that's done click on the animation...if satisfied click on the gif
button and save as a gif...once your tag is saved go back to PSP and
close all layers except the ducks...copy merge/paste as a new layer
remove all the excess surrounding area and copy/paste to animation shop
once in animation shop find your tag that your saved(make sure it's the gif tag)
this tag has 20 frames so you need to duplicate the ducks to 20 frames
copy and paste the ducks into the tag on top of the water...once satisfied
with your animation save as gif.

You're done!!!
Thanks for trying my tutorial
If you use send me a copy so I can show case it...thanks
riggsbee53@gmail.com

7/14/10

PTU Hungry Hill and Pinuptoons - Coffee Date

Coffee Date




I am now a CT for Sarah Hungry Hill 
I've just finish doing a tutorial called Coffee Date.
from the scrap kit of the same name. 
It's a beautiful kit full of beautiful papers and elements.
So this tutorial is the results.

This tutorial was written on July 14 2010. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. Please do not claim as your own.
This tutorial writer assumes you have a working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,but can be adapted to use in other
Paint Shop Pro versions.


SUPPLIES NEEDED


Tube of Choice: I am using the awesome artwork of Pinuptoons..
 You can purchase his tubes at CDO HERE
Please do not use without a license to do so

Scrapkit of choice: I am using Sarah Hungry Hill PUT kit Coffee Date.
Sorry but this kit is no longer available...
please use another one....Thanks Sarah

Mask of Choice: I'm using mask #31 from Butterfly Nutterby Creations..
You can find it HERE
Put mask in mask folder..Thanks Butter

Template of Choice: I am using Creation by Sanie template#17..
you can get it HERE...Thanks Sanie

Word art by me you can download HERE

Font for name is Poor Richard and copy write is always done in Pixelette ... Get them HERE

Effects use gradient glow (eye candy 4000) get it HERE

Drop shadow use throughout H-2/V-2/O-50/B-6.72

Please leave a thank you when you downloading for supplies.

     LET'S BEGIN

Open up Template and ShiftD and close original...delete copyright layer
close all layers except the background layer...the one we'll be working on

Choose a paper of choice( I chose paper#12 )/copy/paste...now go to layers/Load/
save mask/load mask from disk/ and find your mask of choice...with these setting
see photo below....go to layers/merge group




now make circle layer active/go to selections/modify/smooth with these setting
see photo below/click ok/choose a paper of choice ( I chose paper 10 )/copy/paste and resize to fit
circle layer...go to selection invert/go back to paper layer and hit delete/layers/merge/merge down.
deactivate/add drop shadow.





now active rectangle layer/repeat smooth process/choose a paper of choice
 ( I chose paper 10 )/copy/
paste and resize to fit rectangle layer...go to selection invert/go back to paper layer and hit delete
layers/merge/merge down/de-activate. Activate frame layer and either use a paper of choice or color
(I chose #523100)repeat smooth process/flood fill frame with color/add drop shadow.

repeat the same process (noted above) with the second rectangle as you did with the first one.
Also repeat for the second frame too, don't forget to add drop shadow to frame.

now go back to your first rectangle layer and activate/copy and paste your tube of choice/position
the tube where just part of it is showing on the left side of the frame/go to selections/invert/delete
add drop shadow.

now for the square,square1 and square2 we are going to repeat the copy/paste paper process (see above)
Once that is done , we'll going to color the three frames for the squares. I used #a2793e..add dop shadow

Now comes the fun part. decorate you tag to your liking using the elements from the scrap kit.
I chose the table,chair,candle cup of java,teddy bear,both coffee jars.(see my tag for reference)
add a light shadow to these elements H-0/V-0/O-40/B-5...
now add your tube to the right side and give it the original drop shadow.

Add the word art and on the word Wanna/highlight it and go to Eye candy4 gradient 
glow with these setting
Basic-glow width 3.00/soft corners 25/overall opacity 100
Color-color #a2793e opacity 100 and apply to the word.

Add your copyright and watermark and gift to a friend!!!!


You're done!!!
Thanks for trying my tutorial
If you use send me a copy so I can show case it...thanks