10/29/12

PTU Hungry Hill Scraps and Tiffany Toland - Scott

Lost In You


This tutorial was written on October 29,2012.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.




SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Tiffany Toland-Scott .
Please do not use unless you have a license to do so.
You can get her tubes HERE
Scrapkit of Choice: I am using Hungry Hill IB_Tiffany Toland-Scott 15-2
You can purchase it HERE ...Alison
Template of choice:I am using Deessign Depot Lost In You Template
You can download it HERE...Thank you Dee
Filters used:Eye Candy 4000 gradient glow - HERE
Font for Name is Van den Velde Script
Copy write is always done in Pixelette HERE
Dropshadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.
my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.

LET'S BEGIN
Open up Template and ShiftD and close original...delete
copyright layer/close all layers/grunge mask layer as is

On the following raster layers follow these directions...

large back layer as is/activate left purple rectangle layer
color of choice to match tag/left blue rectangle/copy/paste paper
of choice/selection/invert on rectangle layer/delete on paper
layer/merge down/add drop shadow/copy/paste element of choice
resize if needed/add drop shadow

activate right purple rectangle layer/ color of choice to match
tag/left blue rectangle/copy/paste paper of choice/selection
invert on rectangle layer/delete on paper layer/merge down/add
drop shadow/copy/paste element of choice/resize if needed/add
drop shadow

copy/paste/ruin/resize if needed/make sure part of it is showing
add drop shadow

activate purple strip layer/copy/paste/paper of choice/resize
selections/invert on purple strip layer/delete on paper layer
mergedown/add drop shadow/leave white strip layer and skinny
black strip layer as is/add drop shadow

activate white oval layer/color of choice to match tag/add drop
shadow/activate purple oval layer/either color of choice or copy
paste paper of choice/resize/selections/invert on purple oval
layer/delete on paper layer/merge down/keep activated/copy/paste
closeup tube/place where you want it/delete/add drop shadow to both

leave black squares as is/activate blues squares/colorize with color
to match tag/copy/paste elements of choice/add drop shadow to each
leave white frames as is/add drop shadow/music overlay as is

activate blue strip/colorize to match you tag/add drop shadow/leave
wordart as is

copy/paste main tube/resize if needed/place where it will look best
add drop shadow to tube

add any other elements to make your tag your own/add drop shadow on
each element/resize your tag

add your watermark and copyright credits/give it a slight gradient
glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to.... riggsbee53@gmail.com

10/24/12

FTU Fantasy Moments and Ralph Macrey

Bewitched


This tutorial was written on October 23,2012.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.





SUPPLIES NEEDED


Tube of choice: I'm using the awesome work of Ralph Macrey .
Please do not use unless you have a license to do so.
You can get his tubes HERE

Scrapkit of Choice: I am using Fantasy Moments FTU Halloween 2010
You can download it HERE ...Sylvie

Template of choice:I am using Amy & Leah Gimptastic Halloween #1
You can download it HERE...Thank you Leah

Mask of Choice: I am using DBV Mask #117
You can download it Here...Thank you Vaybs

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Threadz Needle
Copy write is always done in Pixelette HERE

Dropshadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


LET'S BEGIN

Open up Template and ShiftD and close original...delete
copyright layer/close all layers/wordart layer as is


On the following raster layers follow these directions...

activate square layer/copy/paste paper of choice/resize
selection/invert on square layer/delete on paper layer
merge down/copy/paste element of choice/resize if needed
add drop shadow

activate rectangle layer/copy/paste paper of choice/resize
selection/invert on rectangle layer/delete on paper layer
merge down/copy/paste element of choice/resize if needed
add drop shadow

activate lower rectangle layer/copy/paste paper of choice
resize/selection/invert on lower rectangle layer/delete
on paper layer/merge down/copy/paste element of choice
resize/add drop shadow

activate upper rectangle layer/copy/paste paper of choice
resize/selection/invert on upper rectangle layer/delete
on paper layer/merge down/copy/paste element of choice
resize/add drop shadow

activate center square layer/copy/paste paper of choice/resize
selection/invert on center square layer/delete on paper layer
merge down/copy/paste element of choice/resize if needed
add drop shadow

activate upper oval layer/copy/paste paper of choice/resize
selection/invert on upper oval layer/delete on paper layer
merge down/copy/paste element of choice/resize/add drop shadow
color oval frame to match oval

activate lower oval layer/copy/paste paper of choice/resize
selection/invert on lower oval layer/delete on paper layer
merge down/copy/paste element of choice/resize/add drop shadow
color oval frame to match oval

activate center oval layer/copy/paste paper of choice/resize
selection/invert on center oval layer/delete on paper layer
merge down/copy/paste element of choice/resize/add drop shadow

copy/paste main tube/resize if needed/place where it will look best
add drop shadow to tube

add any other elements to make your tag your own/add drop shadow on
each element/resize your tag

add your watermark and copyright credits/give it a slight gradient
glow ...now give your tag to a friend.


Forum Tag

Open up template from tag and ShiftD and close original...open new size
raster layer 600x200...this tag is the exact duplicate of the tag only
smaller/resize all layers before you place in this new raster layer

follow the directions above/remember it's just a smaller version of the
tag so resize accordingly

you can add more elements if you like/add drop shadow to everything

 
Avatar

open new raster layer/160x160/choose paper of choice for back ground
add any element you want/copy/paste/resize and place wherever/add
drop shadow

copy/paste tube/resize until the area you want to show is where
you want it to show/add drop shadow

add your watermark and copyright credits to all three tags...

now give your set to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

PTU Kim's Korner and Zlata M

Biker Babe



This tutorial was written on August 27,2012.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.




SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Zlata M .
Please do not use unless you have a license to do so.
You can get her tubes HERE

Scrapkit of Choice: I am using Kim's Korner PTU Biker Rally
You can purchase it HERE ...Kim

Template of choice:I am using Designs by Ali #154
Ali is no longer on the net...Thank you Ali

Mask of Choice: I am using Insatiable Dreams #117
You can download it Here...Thank you Cat

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is DFKai-SB
Copy write is always done in Pixelette HERE

Dropshadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


LET'S BEGIN

Open up Template and ShiftD and close original...delete
copyright layer/close all layers/choose paper of choice
copy/paste and put underneath background layer/go to mask
of choice with these setting and click ok/delete background
layer/change color to match tube/add drop shadow


 

On the following raster layers follow these directions...

activate circle layer/copy/paste paper of choice/resize
selection/invert on circle layer/delete on paperlayer/merge
down/keep activated/copy/paste tube of choice/selections
invert on circle layer/delete on tube layer/add drop shadow

activate long rectangle 1 layer/copy/paste paper of choice
resize/selection/invert on long rectangle 1 layer/delete on
paper layer/merge down

activate long rectangle 2 layer/copy/paste paper of choice
resize/selection/invert on long rectangle 2 layer/delete on
paper layer/merge down

activate long rectangle 3 layer/copy/paste paper of choice
resize/selection/invert on long rectangle 3 layer/delete on
paper layer/merge down

activate rectangle 1 layer/copy/paste paper of choice
resize/selection/invert on rectangle 1 layer/delete on paper
layer/merge down/add dropshadow/keep activated/copy/paste tube
resize/deleteon tube layer/duplicate/original layer/blend/hard
light/place duplicate tube layer underneath original/lower
opacity to 48/add drop shadow to both tubes

activate rectangle 2 layer/copy/paste paper of choice
resize/selection/invert on rectangle 2 layer/delete on paper
layer/merge down/add dropshadow/keep activated/copy/paste tube
resize/delete on tube layer/duplicate/original layer/blend
screen/place duplicate tube layer underneath original/lower
opacity to 52/add drop shadow to both tubes

add any other elements to make your tag your own/add drop shadow on
each element/resize your tag

copy/paste main tube/resizeif needed/place where it will look best
add drop shadow to tube

add your watermark and copyright credits/give it a slight gradient
glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

FTU A Taggers Scrap and Ralph Macrey

Grave Digger

This tutorial was written on August 27,2012.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.



SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Ralph Macrey .
Please do not use unless you have a license to do so.
You can get his tubes HERE

Scrapkit of Choice: I am using ATS Boo2U2 Sampler
You can dowload  it HERE ...Jo

Template of choice:I am using Samantha Halloween2
Creative Misfits Halloween Mask
You can download it HERE...Thank you Sammy

Mask of Choice: None

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Blue Highway Linocut
Copy write is always done in Pixelette HERE

Dropshadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


LET'S BEGIN

Open up Template and ShiftD and close original...delete
copyright layer/close all layers/grave digger wordart
layer as is

On the following raster layers follow these directions...

activate left rectangle back layer/copy/paste paper of
choice/resize/selection/invert on left rectangle back
layer/delete on paper layer/merge down/copy/paste element
of choice/resize if needed/add drop shadow/left rectangle
frame as is/add drop shadow

activate middle rectangle back layer/copy/paste paper of
choice/resize/selection/invert on middle rectangle back
layer/delete on paper layer/merge down/copy/paste element
of choice/resize if needed/add drop shadow/middle rectangle
frame as is/add drop shadow

activate right rectangle back layer/copy/paste paper of
choice/resize/selection/invert on right rectangle back
layer/delete on paper layer/merge down/copy/paste tube
of choice/resize/selection/invert on paper layer/delete
on tube layer/add drop shadow/right rectangle frame as
is/add drop shadow

gravestone back and frame as is/copy/paste element of
choice/add drop shadow to all

gravedigger word art, 100% back,100%,gravedigger back
gravedigger leave as is/resize if needed/add drop
shadow

copy/paste main tube/resize if needed/place where it will look best
add drop shadow to tube

add any other elements to make your tag your own/add drop shadow on
each element/resize your tag

add your watermark and copyright credits/give it a slight gradient
glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to.... riggsbee53@gmail.com

PTU Toxic Desirez and Ralph Macrey

Playa


This tutorial was written on August 27,2012.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.



SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Ralph Macrey .
Please do not use unless you have a license to do so.
You can get his tubes HERE

Scrapkit of Choice: I am using Toxic Desirez PTU Playa
You can purchase it HERE ...Kirstin

Template of choice:I am using Tracy F Designz #67
You can download it HERE...Thank you Tracy

Mask of Choice: I am using Vix Mask #362
You can download it Here...Thank you vix

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Blue Highway D Type
Copy write is always done in Pixelette HERE

Dropshadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


LET'S BEGIN


Open up Template and ShiftD and close original...delete
copyright layer/close all layers/choose paper of choice
copy/paste and put underneath background layer/go to mask
of choice with these setting and click ok/delete background
layer/change color to match tube if needed/add drop shadow


On the following raster layers follow these directions...

glitter long rectangle as is/activate long rectangle1 layer/copy
paste paper of choice/resize/selection/invert on long rectangle1
layer/delete on paper layer/merge down/keep activated/copy/paste
element of choice/resize if needed/add drop shadow

glitter oval layer as is/activate oval layer/copy/paste paper of
choice/resize/selection/invert on oval layer/delete on paper layer
merge down/keep activated/copy/paste tube/resize/delrtr on tube
layer/duplicate/on original/blend/screen/move duplicate layer
beneath original layer/lower opacity to 80/add drop shadow to both
10-10-50-5-black

glitter rectangle as is/activate rectangle 2 layer/copy/paste paper
of choice/resize/selection/invert on rectangle 2 layer/delete on
paper layer/merge down/copy paste element of choice/add drop
shadow

copy/paste main tube/resize if needed/place where it will look best
add drop shadow to tube

add any other elements to make your tag your own/add drop shadow on
each element/resize your tag

add your watermark and copyright credits/give it a slight gradient
glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

10/22/12

FTU Bea's Creations and Ralph Macrey

Maid Like Me

This tutorial was written on July 9,2012.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.



SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Ralph Macrey.
Please do not use unless you have a license to do so.
Purchase his tubes HERE

Scrapkit of Choice: I am using FTU Scrap kit -Bea's Creations
Called Rember Me... Bea has taken her site down.
Please use another scrapkit

Template of choice:I am using Essence of Creatiivity
You can download it HERE...thank you Yvette

Mask of Choice: I am using Enchanted Obessions-Mask #11
You can download it HERE....Thank you Rachael

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Celexa MN...HERE
Copy write is always done in Pixelette ...HERE

Dropshadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.

LET'S BEGIN



Open up Template and ShiftD and close original...delete
copyright layer/close all layers/choose paper of choice
copy/paste and put underneath background layer/go to mask
of choice with these setting and click ok/


delete background layer
on gradient layer circle leave as is/add drop shadow
on large black circle/change color to match tag/add drop shadow/
copy/paste an element of choice/resize to fit/blend/screen/also
add a drop shadow

On large pink circle/activate/copy/paste paper of choice/resize
selection/on circle layer/invert/on paper layer delete/add drop shadow
leave large white circle layer as is/also add drop shadow

On black circle/activate/copy/paste paper of choice/resize
selection/on circle layer/invert/on paper layer delete/add drop shadow
leave activated/copy/paste/tube of choice/resize/place the part that
you want to show/selections/on circle layer/invert/on tube layer/delete
duplicate tube/on original layer/blend/screen/place duplicate layer
underneath/add drop shadow to both

On frame background/activate/copy/paste paper of choice/resize
selection/on circle layer/invert/on paper layer delete/add drop shadow
copy/paste element of choice/resize to fit/add drop shadow/leave white
frame as is/add drop shadow

make an graident with black and green from one of the papers/on thin
rectangle/add this graident/leave thin black rectangle as is/add drop
shadow to bottom one

using your front of choice/write out the words Maid Like This/using black
and green colors/place it on the thin black rectangle/add drop shadow

Add your tube of choice/place where it will look best on your tag
add drop shadow

now add any other element you wish to use to make your tag your
own/add drop shadow on each element/resize your tag

add your watermark and copyright credits/give it a slight gradient
glow ...now give your tag to a friend.


You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog