9/30/13

PTU Honored Scraps and Very Many

With Love

This tutorial was written on September 30,2013. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.




SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Very Many.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using PTU Honored Scraps -With Love
You can purchase it HERE ...Thanks Patty

Template of choice:I am using Punky Butts Template #127
You can download it HERE...Thanks Punky

Mask of Choice: I am using Vix PSP Mask # 320
You can download it HERE.... Thank You Vix

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Choplin Script
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete 
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok



On the following raster layers follow these directions...

activate strip blue layer/copy/paste paper of choice/resize paper
selections/invert on strip layer/delete on paper layer/merge down
add drop shadow

activate strip black layer/copy/paste paper of choice/resize paper
selections/invert on strip layer/delete on paper layer/merge down
add drop shadow

activate circle left layer/copy/paste paper of choice/resize paper
selections/invert on circle layer/delete on paper layer/merge down
recolor circle left frame to match tag/add drop shadow

activate circle right layer/copy/paste paper of choice/resize paper
selections/invert on circle layer/delete on paper layer/merge down
recolor circle right frame to match tag/add drop shadow

activate bottom rectangle/recolor rectangle to match tag/recolor frame
to match the tag/add drop shadow

activate top rectangle/recolor rectangle to match tag/recolor frame
to match the tag/add drop shadow

activate large circle layer/copy/paste paper of choice/resize paper
selections/invert on circle layer/delete on paper layer/merge down
keep activated/copy/paste closeup tube/place closeup where most of 
the face is showing/invert on circle layer/delete on tube layer/effects
xero/porcelaid/with these setting



click ok/drop shadow on tube/ recolor 
large circle frame to match tag

activate strip layer/copy/paste paper of choice/resize paper
selections/invert on strip layer/delete on paper layer/merge down
recolor diamond dots to match tag

activate top small circle layer/copy/paste paper of choice/resize 
paper/selections/invert on circle layer/delete on paper layer/merge 
down/recolor top small frame to match tag

activate bottom small circle layer/copy/paste paper of choice/resize 
paper/selections/invert on circle layer/delete on paper layer/merge 
down/recolor bottom small circle and frame to match tag

activate square layer/copy/paste paper of choice/resize paper/selections
invert on square layer/delete on paper layer/merge down/keep activated
copy/paste close up tube/resize to fit/invert on paper layer/delete on
tube layer/effects/xero/radiance/with these setting


click ok/add drop
shadow to tag/recolor square frame to match tag

add any other elements you wish to use/resize/add drop shadow to each 
element/place where they will look best

copy/paste main tube of choice/resize/place across large circle and square
add drop shadow

add your watermark and copyright credits/give it a slight 
gradient glow.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog




9/27/13

PTU Honored Scraps and Selina Fenech

The Wave

This tutorial was written on September 27,2013. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.



SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Selina Fenech.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using PTU Honor Scraps- The Wave
You can purchase it HERE ...Thanks Patty

Template of choice:I am using amyandleahgimptastic tuts Template #15
You can download it HERE...Thanks Leah

Mask of Choice: I am using Weescotslass Creations Mask #98
You can download it HERE.... Thank You Chell

Filters used:Eye Candy 4000 gradient glow - HERE
AAA Frame - Foto Frame - HERE

Font for Name is Precious
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete copyright 
layer/close all layers/except background/AAA Frame on 
background with these setting


copy/paste paper of choice resize to fit 
canvas/layers/load/save mask/find your mask/and set with these 
setting/click ok



On the following raster layers follow these directions...

activate small square layer/copy/paste paper of choice/resize paper
invert on square layer/delete on tag layer/merge down/add drop shadow

activited square 2 layer/copy/paste paper of choice/resize paper
selections/invert on square 2 layer/delete on paper layer/merge down
change color of square frame to white/add drop shadow

activate square 1 layer/copy/paste paper of choice/resize paper
selections/invert on square 1 layer/delete on paper layer/merge 
down/add drop shadow

activate rectangle 2 layer/copy/paste paper of choice/resize paper
selections/invert on rectangle 2 layer/delete on paper layer/merge 
down/add drop shadow

activate rectangle 1 layer/copy/paste paper of choice/resize paper
selections/invert on rectangle 1 layer/delete on paper layer/merge 
down/add drop shadow

activate circle 3 layer/copy/paste paper of choice/resize paper
selections/invert on circle 3 layer/delete on paper layer/merge 
down/leave circle 3 back as is/add drop shadow

activate circle 2 layer/copy/paste paper of choice/resize paper
selections/invert on circle 2 layer/delete on paper layer/merge 
down/keep activated/copy/paste tube of choice/delete on tube
duplicate tube/on original/blend/overlay/place duplicate under
neath original/add drop shadow to bottom tube/leave circle 2 
back as is/add drop shadow

activate circle 1 layer/copy/paste paper of choice/resize paper
selections/invert on circle 1 layer/delete on paper layer/merge 
down/leave circle 1 back as is/add drop shadow/copy/paste element 
44/resize by 60%/place on top of circle1/duplicate/mirror

Copy/paste element 21/resize by 60%/place between the waves/add
drop shadow/copy/paste element 35/resize to fit circle 1/place on 
top

add any other elements you wish to use/resize/add drop shadow to
each element/place where they will look best

copy/paste tube of choice/mirror and place on top of circle 1/add
drop shadow

add your watermark and copyright credits/give it a slight gradient 
glow.....

To Animated

copy/paste one of the wave to animation shop
animation/image effect with these settings 


and customization







click ok/you should have 20 frames
copy/paste the other wave to animation shop
animation/image effect with same settings and customization
click ok/you should have 20 frames
minimize these for now

go back top and close the following layers

butterflies
seashell
anchor
main tube
element 35
2 waves

copy/paste/merge the rest of the layers/paste into animation shop
edit/duplicate selected 5x then click on frame and duplicate 3x then
click on frame and delete/you should have 20 frames

edit/select all of the first wave/copy into selected frame of your tag
place wave on top of circle on left side/repeat with the second wave
placing on the other side

go back topsp/close above layers and open all the rest/copy/merge and
take into animation shop/duplicate as above until you have 20 frame
edit/select all/copy into selected frame/make you place exactly over
circle/view animation to make sure it's fitted correctly.
If satisfied save as gif

now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog



9/21/13

PTU Honored Scraps and Alex Prihodko

Sky Fall

This tutorial was written on September 21,2013. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.




SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Alex Prihodko.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using PTU Honored Scraps - Sky Fall
You can purchase it HERE ...Thanks Patty

Mask of Choice: I am using Weescotslass Creations Mask #64
You can download it HERE.... Thank You Chell

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Corneria Script Demo
Copy write is always done in Pixelette  HERE

Dropshadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up frame of choice and ShiftD and close original...copy
paste paper of choice/resize to fit canvas/layers/load/save
mask/find your mask/and set with these setting/click ok



On the following raster layers follow these directions...

activate inside of frame activated/modify by 20/copy/paste
paper of choice/invert on frame/delete on paper/place paper
underneath frame/add drop shadow to frame

keep frame activated/copy/paste tube of choice/place where the
face is showing/delete on tube/selections/none/duplicate tube
on original/blend/overlay/place duplicate underneath original
add drop shadow to bottom tube

copy/paste tube of choice again/mirror/place on right side of
frame/resize until you are satisfied/add drop shadow to tube

now add any elements you wish to use to make your tag your own
resize if needed/add drop shadow to each

I chose to add a word art from a poem/you can do the same or not

add your watermark and copyright credits/give it a slight 
gradient glow.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

9/20/13

PTU Abstract Creations and Jessica Dougherty

Sexy Ass Bitch

This tutorial was written on September 20,2013. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.



SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Jessica Doughtery.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using PTU Abstract Creations Perfect Sex
You can purchase it HERE ...Thanks Cassie

Template of choice:I am using Additive Pleasures Template #19
You can download it HERE...Thanks Tamie

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Franklin Gothic Medium
Copy write is always done in Pixelette  HERE

Dropshadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.

     LET'S BEGIN

Open up Template and ShiftD and close original

On the following raster layers follow these directions...

leave glittered rect layer as is/activate rect layer/recolor to match
tag/choose a color from one of the papers/add drop shadow to glitter
rect layer

leave glittered oval as is/activited oval layer/copy/paste paper of 
choice/resize paper/selections/invert on oval layer/delete on paper 
layer/merge down/keep activated/copy/paste tube of choice/resize
duplicate three times/merge each layer down/invert on oval layer
delete on tube layer/blend/screen on tube layer/add drop shadow to 
glittered oval layer

activate rectangle 1 layer/copy/paste paper of choice/resize paper
selections/invert on rectangle layer/delete on paper layer/merge 
down/add drop shadow

leave thin rectangle layer as is/changed color of word ard to match 
tag

leave glittered medium circle layer as is/activate medium circle layer
copy/paste paper of choice/resize paper/selections/invert on medium 
circle layer/delete on paper layer/merge down/add drop shadow

leave glittered small circle layer as is/activate small circle layer
copy/paste paper of choice/resize paper/selections/invert on small 
circle layer/delete on paper layer/merge down/add drop shadow

add any other elements you wish to use/resize/add drop shadow 
to each element/place where they will look best

recolor all word art to match tag/add drop shadow to each

add your watermark and copyright credits/give it a slight 
gradient glow.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog



9/14/13

PTU Foxy's Designz and Martin Abel

Dark Secrets

This tutorial was written on September 13,2013. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.



SUPPLIES NEEDED

Animation Shop 3 - HERE

Tube of choice: I'm using the awesome work of Martin Abel.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using PTU Foxy's Designz Martin Abel
IB- 30-2     You can purchase it HERE ...Thanks Foxy

Animations of Choice:I am using Scrappy Bit of Fun Animation #133
You can download HERE   Thanks Simone

Filters used:Eye Candy 4000 gradient glow - HERE
AAA Frame-Foto Frame - HERE

Font for Name is Bloody Stump - HERE
Copy write is always done in Pixelette - HERE

Dropshadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up new canvas 800x800/copy/paste paper of choice/resize
to fit canvas/effects/ AAA Frame/Foto Frame with these
setting



On the following raster layers follow these directions...

copy/paste circle frames/resize/magic wand/activate inside
right side of frame/copy/paste paper of choice/resize/invert
oh frame/delete on paper/activate inside left side of frame
copy/paste paperof choice/resize/invert on frame/delete on
left paper/place papers underneath frame/add drop shadow
copy/paste elements of choice/resize to fit/ add drop shadow 
to element

copy/paste second frame/resize/magic wand/active inside frame
modify/expand by 3/copy/paste paper of choice/resize paper
invert on frame/delete on paper layer/place paper underneath
frame/add drop shadow/copy/paste elemnt of choice/resize to
fit/add drop shadow

copy/paste tube of choice/resize if needed/place on right side
of tag/add drop shadow

add any other elements you wish to use/resize/add drop shadow 
to each element/place where they will look best

add word art from kit/add fat white gradient glow/add drop shadow

add your watermark and copyright credits/give it a slight 
gradient glow.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to.... riggsbee53@gmail.com



FTU Kittz Kreationz and Jose Cano

Bad Ass Chick

This tutorial was written on September 13,2013. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.




SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Jose Cano.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using PTU Kittz Kreationz
You can purchase it HERE ...Thanks Kittz

Template of choice:I am using Blissfully Beth Template #174
You can download it HERE...Thanks Beth

Mask of Choice: I am using Insatiable Dreams Mask #
You can download it HERE.... Thank You Cat

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Scriptina Script
Copy write is always done in Pixelette  HERE

Dropshadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete 
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok



On the following raster layers follow these directions...

activate white oval layer/copy/paste paper of choice/resize paper
selections/invert on oval layer/delete on paper layer/merge down
keep activated/copy/paste closeup tube of choice/resize to fit
delete on tube layer/erase all excess tube/keep activated/effects
xero/porcelain/with these settings/add drop shadow



keep black line as is/delete dotted black line and copy of dotted
black line/color pink oval black frame black/keep rect1 and rect 2 
as is/add dropshadow

activate square 2 layer/copy/paste paper of choice/resize paper
selections/invert on square 2 layer/delete on paper layer/merge 
down/add drop shadow/copy/paste element of choice/resize to fit
add drop shadow

activate square layer/copy/paste paper of choice/resize paper
selections/invert on square layer/delete on paper layer/merge 
down/add drop shadow/copy/paste/element of choice resize to fit
add drop shadow

leave all three word art layers to match tag/add gradient glow
to middle word art/drop shadow to all three

add any other elements you wish to use/resize/add drop shadow 
to each element/place where they will look best

add word art of choice

add your watermark and copyright credits/give it a slight 
gradient glow.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

Dominic Marco- Gangster Babe

Gangster Babe

This tutorial was written on September 13th 2013. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working knowledge of using 
Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,but can be adapted to 
use in other Paint Shop Pro versions.




SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Dominic Marco
You can purchase his tubes HERE
Please do not use without a license to do so

Mask of Choice: I'm using one of Urban Fairytales mask #11
You can find it HERE
Put mask in mask folder..Thanks so much for the use of your mask

Template of Choice:I'm using Divine Intentionz #362.
You can get it HERE     Thank you Missy

You will also need bows and a motorcycle of Choice.

Font for name is Riesling and copy write 
is always done in Pixelette ... 
Get them HERE


Dropshadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.


my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.



     LET'S BEGIN
Open Template/Shift D/delete original template/delete copyright layer
close all layers except background layer/foreground/background/#761b3f
or the color of your bow/flood fill background with that color/go to layers
load/save mask/find your mask/setup with these setting below/click ok/merge
group.



activate thin rectangle 1/flood fill with color from your tube/I used
#2d2d2d/activate thin rectangle 2/copy/paste halloween paper of choice
resize/invert on rect 2/delete on paper/merge down/activate thin rectangle 3
copy/paste halloween paper of choice/resize/invert on rect 2/delete on paper
merge down/change color of dotted lines to match tag

activate back frame/flood fill with black grey gradient/keep activated
copy/paste tube of choice/position so face is showing/invert on frame
delete on tube/ repeat on second frame/use different part of tube
add drop shadow to tubes/leave frames as is/add drop shadow



copy/paste tube of choice/resize if needed/place where it will look best
add drop shadow/color word art to match tag

add any other elements you wish to use/resize if needed and place where
they will look best/add drop shadow to each

Add your water mark and copyright/now give to a friend

thank you for trying my tutorial..please send me a copy of what you did 
so I can showcase it...riggsbee53@gmail.com

FTU Always Creations and Ismael Rac

Irish

This tutorial was written on March 29,2012. 
But never posted,never to late to post
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.




SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Ismael Rac .
Please do not use unless you have a license to do so. 
You can get his tubes HERE

Scrapkit of Choice: I am using My FTU Irish Gold Scrap kit 
You can download it HERE..Please leave a thank you if you download

Mask of choice:I am using Sophistical Simone mask #56.You can download
it HERE...Thank you Simone

Template of Choice: I am using Toxic Desires-Template #142
You can download it HERE....Thank you Kristin

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Scythe ...HERE
copy write is always done in Pixelette ...HERE 


Drop shadow use through out H-2/V-2/O-65/B-6.00

Please leave a thank you when you downloading for supplies.


my tag is just a guide...please use your imagination 
and make the tag your own you do not have to use any 
of the supplies I used.This will be a quick and easy.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete 
copyright layer/close all layers/choose paper of choice
copy/paste and put underneath background layer/go to mask 
of choice with these setting and click ok/delete background 
layer/removed the word art layer




On the following raster layers follow these directions...

activate oval layer/copy/paste paper of choice/go to oval layer
invert/go to paper layer and delete/merge down/keep activated

copy/paste tube/resize/place the part of the tube that you want to 
show/on oval layer/invert/on tube layer/delete/deactivate/blend/screen
add drop shadow

leave oval shadow as is/add drop shadow

activate oval layer frame/copy/paste paper of choice/go to oval layer 
frame/invert/go to paper layer and delete/merge down

on layers1/copy/paste paper of choice/go to layer1 layer frame
invert/go to paper layer and delete/merge down

on layers2/copy/paste paper of choice/go to layer2 layer 
frame/invert/go to paper layer and delete/merge down

on layers3/copy/paste paper of choice/go to layer3
layer frame/invert/go to paper layer and delete/merge down

on thin rectangle/copy/paste paper of choice/go to thin rectangle
layer frame/invert/go to paper layer and delete/merge down

on thin rectangle1/copy/paste paper of choice/go to thin rectangle1
layer frame/invert/go to paper layer and delete/merge down

now add your main tube and place where you want it/add drop shadow 

now add any other element you wish to use to make your tag your own/add drop
shadow on each element/resize your tag if needed

add your watermark and copyright credits/give it a slight gradient glow
...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

9/12/13

PTU Lady Hawwk Designs and Jessica Doughtery

Teacher's Pet

This tutorial was written on September 10,2013. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.




SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Jessica Doughtery.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using PTU LadyHawwk Designs IB-Jessica 
Doughtery 5-1 ... You can purchase it HERE ...Thanks Cat

Template of choice:I am using on of mine Template #116
You can download it HERE...Please do not share

Filters used:Eye Candy 4000 gradient glow - HERE
AAA Frame- Foto Frame HERE

Font for Name is Precious
Copy write is always done in Pixelette  HERE

Dropshadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete 
copyright layer/close all layers/on background layer/effects
AAA Frame/foto frame with these setting



On the following raster layers follow these directions...

activate frame1 layer/magic wand/click on frame/flood fill with 
color of choice/keep aactivated/effects/inner bevel with these 
setting/click ok/add drop shadow

activate frame2 layer/magic wand/click on frame/flood fill with 
color of choice/keep activated/effects/inner bevel with same 
setting/click ok/add drop shadow

activate rounded rect1 layer/copy/paste paper of choice/resize
paper/selections/invert on rectangle layer/delete on paper layer
merge down/or recolor with color of choice/add drop shadow

activate rounded rect2 layer/copy/paste paper of choice/resize
paper/selections/invert on rectangle layer/delete on paper layer
merge down/or recolor with color of choice/keep activated/copy
paste tube of choice/delete on tube layer/erase all excess tube
below rectangle/duplicate/on original/blend/hard light/place
dplicate underneath original/add drop shadow

on apple layer/magic wand/click apple only/effects/inner bevel 
with same settings/change color to red/deselect/activate leaf
inner bevel with same settings/change color to green/deselect
activate core/inner bevel with same setting/change color to brown
deselect/add drop shadow

on clock layer/you can keep as is or/lghtenit a bit/add drop 
shadow/remove word art and replace with  word art in kit/add
drop shadow

add any other elements you wish to use/resize/add drop shadow 
to each element/place where they will look best

add main tube/place where it will look best/sharpen/add drop
shadow

add your watermark and copyright credits/give it a slight 
gradient glow.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

9/5/13

PTU Hungry Hills and Michael Calandra

Hollowed Hills

This tutorial was written on September 5,2013. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.




SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Michael Calandra.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using PTU Hungry Hills Hollowed Tones 
You can purchase it HERE ...Thanks Alison

Filters used:Eye Candy 4000 gradient glow - HERE
AAA Frame - Photo Frame - HERE

Font for Name is Scythe- HERE
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.


     LET'S BEGIN

Open up gazebo/Ctrl-D/close originial/Copy/paste paper of choice
resize to fit layer/effects/AAA Frames/Foto Frame with these settings
place underneath gazebo


copy/paste tube of choice
duplicate gazebo and place on top of tube/using eraser back
ground tool/erase all of gazebo until the tube comes through

add your element to make the tag your own/resize if needed/use
your imagination/add drop shadow to each element/arrange to
bring out the best in your tag

write a word art for your tag/I used the font Scythe/add drop
shadow/resize the tag if needed

add your watermark and copyright credits/give it a slight 
gradient glow.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to.... riggsbee53@gmail.com

PTU Foxy's Designz and Jennifer Janesko

Wicked

This tutorial was written on September 5,2013. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.




SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Jessica Janesko.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using PTU Foxys Designz Jessica Janesko IB-16-3
You can purchase it HERE ...Thanks Foxy

Template of choice:I am using Additive Pleasures Template #41
You can download it HERE...Thanks Tamie

Mask of Choice: I am using Tonya of Creative Misfits Mask #1
You can download it HERE.... Thank You Tonya

Filters used:Eye Candy 4000 gradient glow - HERE
VM Extravaganza - Transmission - HERE

Font for Name is Scythe -  HERE
Copy write is always done in Pixelette -  HERE

Dropshadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete copyright
layer/close all layers/except backgrd layer/effects/AAA Frame/foto
frame with these setting


/copy/paste paper of choice/resize to fit 
canvas/layers/load/save mask/find your mask/set with these setting
click ok



On the following raster layers follow these directions...

leave the following layer just as they are/mask and glittered rect
angle1/and rectangle layer as is/glittered rectangle2 and rectangle2 
layer as is/add drop shadow to glittered layers/leave small text as is

activate square layer/copy/paste paper of choice/resize paper/selections
invert on square layer/delete on paper layer/merge down/copy/paste 
elements of choice/resize/add drop shadow

glittered circle as is/activate circle layer/copy/paste paper of 
choice/resize paper/selections/invert on circle layer/delete on paper 
layer/merge down/keep activated/effects/VM Extravaganza/transmission
with these setting


still activated/copy/paste tube of choice/resize
by 120%/place within circle so that the top part will be showing/delete
on tube/blend/screen/add drop shadow to glittered circle and tube

glittered circle 2 as is/activate circle 2 layer/copy/paste paper of 
choice/resize paper/selections/invert on circle2 layer/delete on paper 
layer/merge down/blend/screen/add drop shadow/copy/paste element of 
choice/resize/add drop shadow/leave strip and text layers as is/add
drop shadow to strip layer

add any other elements you wish to use/resize/add drop shadow to each 
element/place where they will look best

copy/paste main tube of choice/place underneath strip layer/add drop
shadow

add your watermark and copyright credits/give it a slight 
gradient glow.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog