9/14/16

FTU Kittz Kreationz and Celine Art

Skull A Tude

This tutorial was written on September 14,2016. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.





SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Celine Art.
Please do not use unless you have a license to do so. 
This tube was purchase at SATC..they are no longer online.

Scrapkit of Choice: I am using FTU Kittz Scraps -Rock Skullz
You can download it HERE ...Thank You Kittz

Template of choice:I am using Punky Butts 3128
You can download it HERE...Thanks Punky

Mask of Choice: I am using Vix big Mask #19
You can download it HERE.... Thank You Vix

Filters used:Eye Candy 4000 gradient glow - HERE
Penta.com - Dot and Cross -HERE


Font for Name is Back to Black Demo -HERE
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-60/B-6.85

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete 
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok



On the following raster layers follow these directions...

activate left square layer/copy/paste paper of choice/resize
paper/selections/modify/smooth with these setting/invert on 
square layer/delete on paper layer/merge down/add drop shadow



leave large circle layer and circle dot layer as is/add drop shadow

activate medium circle layer/copy/paste paper of choice resize paper
selections/modify/smooth with setting above/invert on circle layer
delete on paper layer/merge down/add drop shadow/leave dotted circle
 as is



leave strip1 layer and strip2 layer as is/add drop shadow

activate large square layer/copy/paste paper of choice/resize paper
selections/modify/smooth with setting above/invert on square layer
delete on paper layer/merge down/keep activated/copy/paste tube of
choice/position tube so top part is within the square layer or right
side/resize by 70%/delete on tube layer/effect/penta.com/dot and cross 
with these settings/add drop shadow





activate rectangle layer/copy/paste paper of choice/resize paper
selections/modify/smooth with setting above/invert on rectangle layer
delete on paper layer/merge down/add drop shadow
recolor red dot 1 and 2 with this color 19de12



activate circle left layer/recolor with this color c00bd4/leave frame
as is/do the same with circle right layer/add drop shadow to both

copy/paste a star element over top of star/resize to fit/merge down
and add drop shadow/recolor 3 star layer to black/add drop shadow
move word art to left side

copy paste your tube again/resize by 70% and then 85%/place on right
side of tag/add drop shadow

add any other elements you wish to use/resize if needed/add drop shadow
to each element/place where they will look best

add your watermark and copyright credits/give it a slight gradient 
glow.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

6/11/16

CDO Hungry Hills and Robert Alvarado

Absolutely Adorable

This tutorial was written on June 11,2016. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.




SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Robert Alvarado.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using CDO Hungry Hills Scraps Robert Alvarado Bundle 21
You can purchase it HERE ...Thanks Alison

Mask of Choice: I am using Insatiable Dreams #39 and #444 
You can download HERE......Thank you Cat

Filters used:Eye Candy 4000 gradient glow - HERE
Penta.com - HERE

Font for Name is Mayhem
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-60/B-6.85

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.


     LET'S BEGIN


Open up new raster layer 800x800/copy/paste paper of choice/resize
to fit canvas/layers/load/save mask/find your mask/and set with 
these setting/click ok



Open up new raster layer 800x800/copy/paste paper of choice/resize 
to fit canvas/layers/load/save mask/find your mask/and set with 
these setting/click ok/merge mask layers down



copy/paste flourish-3/resize by 70% twice/place in front of mask layer
on the right side of canvas/add drop shadow

copy/paste frame-3/resize by 70%/place in front of flourish layer
in center of canvas/magic wand/click inside of frame/selections/modify
by 15%/invert/copy/paste paper of choice/resize paper/delete on paper
copy/paste close up tube/resize tube so that the top part is overtop of 
the frame/erase any excess tube from the bottom of the tube/effect/penta
.com/jeans/with these setting on the tube/add drop shadow



now it's time to have some fun/add any other elements you wish to use
resize if needed/add drop shadow to each element/place where they will 
look best

copy/paste tube of choice/resize by 70%/place on left side of the tag
add drop shadow

add wordart if you wish/I separted the three word art and put them at  
different areas of the tag/add fat gradient glow/add drop shadow to each

add your watermark and copyright credits/give it a slight gradient 
glow.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

6/10/16

CDO Hungry Hills and Robert Alvarado

Limited Addition

This tutorial was written on June 10,2016. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.





SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Robert Alvarado.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using CDO Hungry Hills Scraps Robert Alvarado Pack 21
Pack 86...You can purchase it HERE ...Thank You Alison

Template of choice:I am using Divine Intentionz Template # 381
You can download it HERE...Thanks Missy

Mask of Choice: I am using Insatiable Dreams Mask #2
You can download it HERE.... Thank You Cat

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Microsoft YaHei
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-60/B-6.85

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete 
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok



On the following raster layers follow these directions...

Colorize dotted line layer#1 and #2 with these settings



activate rectangle layer/copy/paste paper of choice/resize
paper/selections/modify/smooth with these setting


invert on 
rectangle layer/delete on paper layer/merge down/add drop 
shadow

activate oval layer/copy/paste paper of choice/resize paper
selections/modify/smooth with same setting above/invert on 
oval layer/delete on paper layer/merge down/add drop 
shadow

activate circle layer/copy/paste paper of choice/resize paper
selections/modify/smooth with same setting above/invert on 
circle layer/delete on paper layer/merge down/add drop shadow
leave chrome circle layer as is/add drop shadow

activate right frame back layer/copy/paste paper of choice/resize 
paper/selections/modify/smooth with same setting above/invert on
frame back layer/delete on paper layer/merge down/leave frame as 
is/copy/paste tubeof choice/place with head in square/delete/erase 
all excess tube/add drop shadow to frame and tube

activate left frame back layer/copy/paste paper of choice/resize 
paper/selections/modify/smooth with same setting above/invert on
frame back layer/delete on paper layer/merge down/leave frame as 
is/copy/paste tube of choice/place with head in square/delete/erase 
all excess tube/add drop shadow to frame and tube

Copy/paste tube of choice/place in center of tag/resize if needed
add drop shadow

activate word art layer/recolor all the pink words to red/merge down
to word art back/recolor all three star layers red/leavebradlayers as 
is/add drop shadow

add any other elements you wish to use/resize if needed/add drop 
shadow to each element/place where they will look best

add your watermark and copyright credits/give it a slight gradient 
glow.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

6/9/16

CDO Hungry Hill and Robert Alvarado

Girl Got Attitude

This tutorial was written on June 10,2016. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.




SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Robert Alvarado.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using CDO Hungry Hill Scraps Robert Alvarado Pack 21
You can purchase it HERE ...Thank You Alison

Template of choice:I am using Divine Intentionz Template # 214
You can download it HERE...Thanks Missy

Mask of Choice: I am using Insatiable Dreams Mask #30
You can download it HERE.... Thank You Cat

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Remachine Script
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-60/B-6.85

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete 
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok



On the following raster layers follow these directions...

activate rectangle layer/copy/paste paper of choice/resize
paper/selections/modify/smooth with these setting


invert on 
rectangle layer/delete on paper layer/merge down/add drop 
shadow/leave dash layer as is

activate thin rectangle layer/selections/smooth with setting 
above/recolor using gradient below/add drop shadow



activate 2nd thin rectangle layer/selections/smooth with setting 
above/recolor using gradient above/add drop shadow

activate 3rd thin rectangle layer/copy/paste paper of choice
resize paper/selections/modify/smooth with setting above/invert 
on rectangle layer/delete on paper layer/merge down/hue-saturation 
with these settings/add drop shadow



activate 4th thin rectangle layer/copy/paste paper of choice
resize paper/selections/modify/smooth with setting above/invert 
on rectangle layer/delete on paper layer/merge down/hue-saturation 
with settings above/add drop shadow

activate word art temp/selections/smooth with setting above/recolor 
using gradient used before/selection none/click on first letter/copy
paste tube of choice/place tube where you want it in the letter/invert
on letter/delete on tube/do this for all letterd/merge each layer down
copy/paste as a new layer/erase all excess tube/goback to main tag
delete picture wordart and replace with the new one/add drop shadow

activate word art layer/adjust/hue-saturation/hue-sauration-lightness
with these  settings/click ok/add drop shadow



add any other elements you wish to use/resize if needed/add drop 
shadow to each element/place where they will look best

copy/paste main tube of  choice/place where it will look best
add drop shadow

Copy/paste frame5/ reside by 50% twice and 70% once/click inside frame
selections/modify by 15%/invert/copy/paste tube/place face inside frame 
delete on tube/erase all excess tube/add drop shadow to tube and frame

add your watermark and copyright credits/give it a slight gradient 
glow.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

5/13/16

PTU Crystal Creations and Tezza Dezignz Tube Art

Bee

This tutorial was written on May 13,2016. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.




SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Tezza Dezignz Tube Art.
Please do not use unless you have a license to do so. 
Purchase Them HERE

Scrapkit of Choice: I am using PTU Crystal Creations - Beatrice
You can purchase it HERE ...Thanks Crystal

Mask of Choice: I am using Vix's PSP Big Mask #19 
You can download it HERE - Thanks Vix

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Connie
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-60/B-6.85

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up new raster layer 800x800/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok

copy/paste element #30/resize
by 70%/place in center of canvas/add drop shadow

copy/paste element #27/resize by 70% twice/place in front of fence 
layer/duplicate 2x/overlap each flower along front of fence/merge
each layer down/add drop shadow

copy/paste element #1/resize by 70%/place in front of flowers/add
drop shadow

copy/paste element #20/resize by 70%/place in behind fence in center
add drop shadow

copy/paste element #15/resize by 70%/place in front of grass on left
side/add drop shadow

copy/paste tube of choice/resize by 70% twice/place on right side of
 grass/add drop shadow

now it's time to have some fun/add any other elements you wish to use
resize if needed/add drop shadow to each element/place where they will 
look best

add your watermark and copyright credits/give it a slight gradient 
glow.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog



5/9/16

CDO Gimptastic Scraps and Cuddly Rigor Mortis

Honey

This tutorial was written on May 9,2016. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.




SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Cuddly Rigor Mortis.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using CDO Gimptastic Scraps IB Cuddly Rigor Motis BT 2016
Pack 86...You can purchase it HERE ...Thank You Amy

Template of choice:I am using Aqua Rebel 315 Template # 87
You can download it HERE...Thanks Aqua

Mask of Choice: I am using Babes Designz Mask 37  HERE 
and Designz by Vabys mask #101
You can download it HERE.... Thank You 

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Impact
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-60/B-6.85

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete 
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok


copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok


On the following raster layers follow these directions...

activate right circle layer/copy/paste paper of choice/resize
paper/selections/modify/smooth with these setting


invert on 
circle layer/delete on paper layer/merge down/add drop shadow

activate left circle layer/copy/paste paper of choice resize paper
selections/modify/smooth with setting above/invert on circle layer
delete on paper layer/merge down/add drop shadow

leave right back rectangle as is/activate right slanted rectangle 
layer/copy/paste paper of choice/resize paper/selections/modify
smooth with setting above/invert on rectangle layer/delete on paper 
layer/merge down/add drop shadow

leave left back rectangle as is/activate left slanted rectangle 
layer/copy/paste paper of choice/resize paper/selections/modify
smooth with setting above/invert on rectangle layer/delete on paper 
layer/merge down/add drop shadow

activate center circle layer/copy/paste paper of choice/resize paper
selections/modify/smooth with setting above/invert on circle layer
delete on paper layer/merge down/leave middle circle layers as is

activate top circle/copy/paste paper of choice/resize paper/selections/
modify/smooth with setting above/invert on circle layer/delete on paper 
layer/merge down/add drop shadow/copy/paste tube of choice/resize if needed
place in middle of top layer/add drop shadow 

leave left small square as is/activate left small square layer/copy/paste 
paper of choice resize paper/selections/modify/smooth with setting above
invert on square layer/delete on paper layer/merge down/add drop shadow

leave left small bottom square as is/activate left small square layer/copy
paste paper of choice resize paper/selections/modify/smooth with setting 
above/invert on square layer/delete on paper layer/merge down/add drop shadow

leave left small middle square as is/activate left small square layer/copy
paste paper of choice resize paper/selections/modify/smooth with setting 
above/invert on square layer/delete on paper layer/merge down/add drop shadow

add any other elements you wish to use/resize if needed/add drop shadow
to each element/place where they will look best

add your watermark and copyright credits/give it a slight gradient 
glow.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

5/5/16

PTU Exclusive LadyHawwk Designs and Barbara Jensen

Elegance

This tutorial was written on May 5,2016. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.





SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Barbara Jensen.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using PTU LadyHawwk Designs Exclusive 
for Barbara Jensen-Elegance...You can purchase it HERE ...Thank You Cat

Template of choice:I am using Gimptastic Tuts Template #1
You can download it HERE...Thanks Leah

Mask of Choice: I am using Insatiable Dreams Mask #395
You can download it HERE.... Thank You Cat

Filters used:Eye Candy 4000 gradient glow - HERE
Eye Candy 4000- Glass

Font for Name is Precious
Copy write is always done in Pixelette  HERE

Dropshadow use through out H-2/V-2/O-60/B-6.85

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete 
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok



On the following raster layers follow these directions...

activate circle backing layer/copy/paste paper # 9/resize
paper/recolor paper a little darker/I used e6bf60/selections
modify/smooth with these setting


click ok/invert on circle 
layer/delete on paper layer/merge down/add drop shadow

activate large circle layer/copy/paste paper # 6/resize paper
selections/modify/smooth setting above/click ok/invert on 
circle layer/delete on paper layer/merge down/keep activated
copy/pase  tube of choice/resize by 120%/place in middle of
circle/delete on tube/erase all excess tube/add drop shadow
to circle and tube

activate rectangle backing2 layer/copy/paste paper of choice
resize paper/selections/modify/smooth setting above/click 
ok/invert on rectangle layer/delete on paper layer/merge down
add drop shadow

activate rectangle #2 layer/copy/paste paper of choice/resize
paper/selections/modify/smooth setting above/click ok
invert on rectangle layer/delete on paper layer/merge down/add
drop shadow

activate rectangle backing #1 layer/recolor black/add drop shadow
activate rectangle 1/copy/paste paper # 10/recolor this paper the
samecolor as you did the other one/resize paper/selections/modify
smooth setting above/click ok/invert on rectangle layer/delete
on paper layer/merge down/now merge this layer to the backing layer
add drop shadow

activate long strip backing layer/recolor black/activate long strip
layer/copy/paste paper of choice/recolor with the same color/resize 
paper/selections/modify/smooth  setting above/click ok/invert on 
Strip layer/delete on paper layer/merge down/now merge this layer to 
the backing layer/add drop shadow
recolor thin strip 1 layer and thinstrip2 layer black/add drop shadow

copy/paste tube of choice/resize if needed/place on left side of tag
mirror/add drop Shadow

add any other elements you wish to use/resize if needed/add drop shadow
to each element/place where they will look best
Forword art I wrote the word Elegance with same font for name/add drop 
shadow

add your watermark and copyright credits/give it a slight gradient glow
.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

Exclusive PTU LadyHawwk Designs and Barbara Jensen

Fabulous

This tutorial was written on May 5,2016. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.



SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Barbara Jensen.
Please do not use unless you have a license to do so. 
Get Them HERE

Scrapkit of Choice: I am using PTU LadyHawwk Designs Exclusive 
for Barbara Jensen-Elegance...You can purchase it HERE ...Thank You Cat

Template of choice:I am using Millie PSP Madness Template #794
You can download it HERE...Thanks Millie

Mask of Choice: I am using Insatiable Dreams Mask #211 and 218
You can download it HERE.... Thank You Cat

Filters used:Eye Candy 4000 gradient glow - HERE
Eye Candy 4000- Glass

Font for Name is Copper Black
Copy write is always done in Pixelette  HERE

Dropshadow use through out H-2/V-2/O-60/B-6.85

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete 
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/merge group



copy/paste paper of choice/resize to fit canvas/layers/load
save mask/find your 2nd mask/and set with these setting/click 
ok/merge group



On the following raster layers follow these directions...

activate large rounded square layer/copy/paste paper of choice
resize paper/selections/modify/smooth with these setting/


click 
ok/invert on rounded square layer/delete on paper layer/merge 
down/add drop shadow

activate small rounded rectangle layer/copy/paste paper of choice
resize paper/selections/modify/smooth setting above/click ok
invert on rectangle layer/delete on paper layer/merge down/add
drop shadow

activate long rectangle layer/copy/paste paper of choice/resize
paper/selections/modify/smooth setting above/click ok/invert
on rectangle layer/delete on paper layer/merge down/add drop
shadow

activate large square layer/copy/paste paper of choice/resize
paper/selections/modify/smooth setting above/click ok
invert on rectangle layer/delete on paper layer/merge down/add
drop shadow

activate medium rectangle layer/copy/paste paper of choice/resize
paper/selections/modify smooth setting above/click ok/invert 
on rectangle layer/delete on paper layer/merge down


copy/paste tube of choice/resize if needed/place in middle of tag
add drop Shadow

add any other elements you wish to use/resize if needed/add drop 
shadow to each element/place where they will look best

Recolor large wordart to match the tag/leavewhite word art as is/add 
drop shadow

On name/Effects inner bevel with these settings/click ok


then effects
eye candy/glass with these settings



click ok/add drop shadow

add your watermark and copyright credits/give it a slight gradient 
glow.....now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to.... riggsbee53@gmail.com