5/21/12

PTU CBT and Pinuptoons

A Different Kind Of Classy

This tutorial was written on May 20,2012.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.


SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Pinuptoons.
Please do not use unless you have a license to do so.
You can get his tubes HERE

Scrapkit of Choice: I am using CBT PTU Scrap kit
Called Classic...You can purchase it HERE...Thank you

Mask of choice:I am using Urban Fairytales mask #57
You can download it HERE...Thank you Sunf

Template of Choice: I am using Amy/Leahs Gimptastic Tuts
Template # 75...You can download it HERE....Thank you Leah

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Brock Script...HERE
Copy write is always done in Pixelette ...HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete
copyright layer/close all layers/choose paper of choice
copy/paste and put underneath background layer/go to mask
of choice with these setting and click ok/delete background
layer


On the following raster layers follow these directions...

first resize all layers by 90%

activate lg square layer/copy/paste paper of
choice/go to lg square layer/invert/go to paper layer and
delete/merge down/adjust/Hue and Saturation/colorize with
these setting/click ok


activate lg square frame layer/colorizes with color of choice
copy/paste element of choice/resize if needed to fit inside
frame/add drop shadow to frame and element

activate circle4 bottom layer/copy/paste paper of choice go
to circle4 bottom layer/invert/go to paper layer and delete
merge down/add drop shadow

activate circle4 top layer/copy/paste paper of choice go
to circle4 top layer/invert/go to paper layer and delete
merge down/add drop shadow

activate square4 layer/magic wand/click inside/flood fill
with the color black

activate square3 layer/magic wand/click inside/flood fill
with the color black

activate square2 layer/copy/paste paper of choice go
to square2 top layer/invert/go to paper layer and delete
merge down/add drop shadow

activate square1 layer/copy/paste paper of choice go
to square1 top layer/invert/go to paper layer and delete
merge down/add drop shadow

activate circle3 layer/colorizes with color of choice
copy/paste element of choice/resize if needed to fit inside
circle3/duplicate/on main element/blend/screen/place duplicate
underneath/merge down/add drop shadow to circle and element

activate circle2 layer/colorizes with color of choice
copy/paste element of choice/resize if needed to fit inside
circle2/duplicate/on main element/blend/soft light/place duplicate
underneath/merge down/add drop shadow to circle and element

activate circle1 layer/copy/paste paper of choice go to
circle1 layer/invert/go to paper layer and delete merge
down/keep activated

copy paste close up tube of choice/resize by 120% if it's a
small tube/duplicate and close this layer/selections/invert
on circle layer/delete on tube layer/erase all excess tube/
open duplicate layer/take your eraser and eraser all excess
but you want this tube on top of circle frame/add drop shadow
to bottom tube

now add any other element you wish to use to make your tag your
own/add drop shadow on each element

copy paste main tube and place where you want it/resize if needed
add drop shadow

you can either add a word art to your tag or not...it's up to you
I chose to add a word art

add your watermark and copyright credits/give it a slight gradient
glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....riggsbee53@gmail.com

5/19/12

PTU Hungry Hills and Pinuptoons

This tutorial was written on May 19,2012.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Pinuptoons.
Please do not use unless you have a license to do so.
You can get her tubes HERE

Scrapkit of Choice: I am using Hungry Hills PTU Scrap/bundle
Pinuptoons 146...You can purchase it HERE...Thank you Ali

Mask of choice:I am using Melissaz Creationz mask #10
You can download it HERE...Thank you Melissaz

Template of Choice: I am using Toxic Desire Scrapz -Template #148
You can download it HERE....Thank you Kristin

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Stonehenge...HERE
Copy write is always done in Pixelette ...HERE


Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.


my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete
copyright layer/close all layers/choose paper of choice
copy/paste and put underneath background layer/go to mask
of choice with these setting and click ok/delete background
layer

On the following raster layers follow these directions...

activate lg rectangle layer/copy/paste paper of choice/go to
lg rectangle layer/invert/go to paper layer and delete/merge
down/add drop shadow

copy/paste the umbrella/resize/add drop shadow/duplicate

activate rectangle layer/copy/paste paper of choice/go to
rectangle layer/invert/go to paper layer and delete/merge
down/keep activated

copy/paste chair/resize and place on top of rectangle layer
add drop shadow

take duplicate umbrella and place on top of rectangle layer
take your eraser tool and erase the pole area so that just
the umbrella part shows at the top

activate circle layer/copy/paste paper of choice go to
circle layer/invert/go to paper layer and delete/merge
down/add drop shadow

now move the chair so that you see part of it peeping out
around the circle

copy/paste life's a beach frame/resize so that it fit around
the circle/add drop shadow

copy/paste/close up tube/resize to fit where you want it
add drop shadow/blend overlay

copy/paste main tube/resize if needed/add drop shadow
remove the dotted layer and star layer

now add any other element you wish to use to make your tag your
own/add drop shadow on each element

add your watermark and copyright credits/give it a slight gradient
glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....riggsbee53@gmail.com

FTU 2pc. Forum Set / Maryline Cazenave

This tutorial was written on April 24 2012.
Any similarities to another tutorial is
purely coincidental.All my tutorial are
register with My Free Copyright. Please do
not claim as your own.This tutorial writer
assumes you have a working knowledge of
using Paint Shop Pro.This tutorial was done
in Paint Shop Pro9,but can be adapted to
use in other Paint Shop Pro versions.

 





SUPPLIES NEEDED

Tube of Choice: The artwork of Maryline Cazenave.
You can purchase her artwork HERE
Please do not use without a license to do so

Mask of Choice: I'm using Becky's Mask #41.

Thanks Becky for the use of the mask

Filters used:Eye Candy 4000 gradient glow - HERE

Font for name is Gracey's Curse and copy write is
always done in Pixelette ... Get them HERE

Drop shadow use through out H-2/V-2/O-65/B-6.00

Please leave a thank you when you downloading for
supplies.


my tag is just a guide...please use your imagination
and make the tag your own you do not have to use any
of the supplies I used.


 LET'S BEGIN


Forum Tag

Open up new raster layer 600x250/72.000 resolution
flood fill raster with a dark color from your tube
layers/load/save mask/load mask from disk/locate your
mask of choice/apply with these setting/click ok





new layer raster/flood fill raster with a light color
from your tube/layers/load/save mask/load mask from
disk/locate your mask of choice/apply with these setting
click ok





new raster layer/selection tool/rectangle/make a rectangle
115x15/flood fill with the light color
new raster layer/section tool /rectangle make a rectangle
145x45/flood fill with dark color

duplicate first rectangle/place it next to 2nd rectangle
duplicate 2nd rectangle/place next to 3rd rectangle
(see my tag for placement) you should have four rectangle
two small and two medium

now on the first small rectangle/duplicate 2x/on first
layer/adjust/add/remove noise/add noise/with these setting
click ok



close 1st layer/open 2nd layer/adjust/add remove noise/add
noise/with these setting/click ok



close 2nd layer/open 3rd layer/adjust/add remove noise/add
noise with these setting/click ok 




apply to 2nd,3rd and 4th rectangle the above directions

now so you won't be confused when it's time to animate/we
will rename our rectangle layers/on the first small rectangle
rename raster1/leave copies as is
on first medium rectangle/rename raster2/leave copies as is
on second small rectangle rename raster3/leave copies as is
on secong medium rectangle/rename raster4/leave copies as is

now leave raster 1-2-3 and 4 open/close all the others

copy/paste your tube layer and place on right side of canvas
now you need a close up of just the head shot so take your
selection tool/tube layer/select the area you want/copy/paste
as a new raster layer

copy/paste on right side of canvas/resize by 120% 2x/place
where you want it/(see my tag)/add drop shadow to both tubes

new raster layer/flood fill with dark color/selections/select
all/modify/contract by 10/delete/magic wand/select inside
rectangle/chose light foreground and dark background colors
material pallet/gradient with these setting/click ok/



adjust/add/remove noise/add noise with these setting/

click ok/selections/none add drop shadow



write whatever word art you wish to use/ I wrote "Where's the
party- is it over"(see my tag) add drop shadow

add copyright and watermark and a friend's name


Avatar

open new raster layer/150x150

Shift/D your tag/on the duplicate tag/take your crop tool
and go to the right side and draw a rectangle 150x150/

place where you want your avatar to be
(I placed mine near the left edge)
make sure you get at least two of the rectangles
 hit delete/copy/paste your tube/resize if needed
add drop shadow/copyright and water mark

and first letter of name

To animate forum and avatar

copy merge/paste/take to animation shop/now go back to paint
shop and close the first layers and open the 4(2) 2nd layers
copy merge/paste into animation shop after current layer/close
2nd layers and open the 4(2) 3rd layers/copy merge/paste into
animation shop after current layer/save as gif

now give your set to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
riggsbee53@gmail.com


5/16/12

PTU KCreations and Medievil Creations Poser

This tutorial was written on May 3,2012.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.




SUPPLIES NEEDED

Tube of choice: Medievil Creations Posers within kit

Scrapkit of Choice: I am using KCreations PTU Scrap kit
Called Cancer Awareness...You can purchase it HERE...Thank you Kari

Mask of choice:I am using Horseplay's Pasture mask #30
You can download it HERE...Thank you Bev

Template of Choice: I am using Melissaz Creationz -Template #71
You can download it HERE....Thank you Melissaz

Filters used:Eye Candy 4000 gradient glow - HERE
Xero -Radiance...HERE

Font for Name is Berylium...HERE
Copy write is always done in Pixelette ...HERE


Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.


my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete
copyright layer/close all layers/choose paper of choice
copy/paste and put underneath background layer/go to mask
of choice with these setting and click ok/delete background
layer



On the following raster layers follow these directions...
to avoid confusion/label each layer

activate circle layer/copy/paste paper of choice/go to
circle layer/invert/go to paper layer and delete/merge
down/copy/paste flower of choice/resize to fit inside of
circle/add drop shadow/copy/paste round frame of choice
resize to fit/add drop shadow

activate rectangle layer/copy/paste paper of choice go to
rectangle layer/invert/go to paper layer and delete/merge
down/add drop shadow

activate rectangle2 layer/copy/paste paper of choice go to
rectangle2 layer/invert/go to paper layer and delete/merge
down/add drop shadow

activate square1/copy/paste poser or tube of choice/resize
by 50%/place poser or tube where you want it to show/selection
on square1 layer/invert/on poser layer/delete/selection/none
remove all excess from canvas/duplicate tube or poser/on
original blend/screen/place duplicate underneath original/add
drop shadow to both/on dotted square recolor to match tag

activate rectangle3 layer/copy/paste paper of choice go to
rectangle3 layer/invert/go to paper layer and delete/merge
down/add drop shadow

on dotted line1 duplicate 3x merging each layer into one/add
drop shadow of 1/1/60/3

on dotted line2 change color to match tag/add  same drop
shadow as above

activate square2 layer/copy/paste paper of choice go to square2
layer/invert/go to paper layer and delete/merge down/add drop
shadow/copy/paste poser or tube of choice/resize by 50%/place
poser or tube where you want it to show/selection on square2
layer/invert/on poser layer/delete/selection/none/Image/mirror
remove all excess from canvas/duplicate tube or poser/on original
xero/radiance with these setting


blend/soft light/on duplicated
layer place underneath original/lower opacity to 50%/add drop
shadow to both/leave dotted square2 as is

now add any other element you wish to use to make your tag your
own/add drop shadow on each element

you can either add a word art to your tag or not...it's up to you

add your watermark and copyright credits/give it a slight gradient
glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....riggsbee53@gmail.com

5/15/12

PTU Hungry Hills and Selina Fenech

 

This tutorial was written on May 15,2012.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.


SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Selina Fenech.
Please do not use unless you have a license to do so.
You can get her tubes HERE

Scrapkit of Choice: I am using Hungry Hills PTU Scrap kit
Called Sea Breeze...You can purchase it HERE...Thank you Ali

Mask of choice:I am using Design by Vaybs mask #131
You can download it HERE...Thank you Vaybs

Template of Choice: I am using Toxic Desirez Scrapz -Template #114
You can download it HERE....Thank you Kristin

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Splendid...HERE
Copy write is always done in Pixelette ...HERE


Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.


my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete
copyright layer/close all layers/choose paper of choice
copy/paste and put underneath background layer/go to mask
of choice with these setting and click ok/delete background
layer
 

On the following raster layers follow these directions...

activate rectangle layer/copy/paste paper of choice/go to
rectangle layer/invert/go to paper layer and delete/merge
down/add drop shadow

activate thin rectangle layer/copy/paste paper of choice/go
to thin rectangle layer/invert/go to paper layer and delete
merge down/keep activated

activate purple circle layer/copy/paste paper of choice go
to purple circle layer/invert/go to paper layer and delete
merge down/add drop shadow

delete the white circle layer/copy/paste frame4/resize to fit
circle/add drop shadow

copy/paste your tube/place underneath frame and place where it
will look best/resize if needed/duplicate and place this over top
of frame/now take your eraser tool and erase the parts that are
not showing if needed( I wanted her tail and head above the frame)
add drop shadow to both

copy/paste the splash and place underneath of the tube/label splash
1/erase all that is outside pf the frame/now copy/paste the splash
again/place on top of tube/label splash 2/take your eraser tool and
erase some on both sides so that the splash is confine to the area
between her backside and her upper thigh/copy/paste splash again
label splash 3/place this splash higher up on the tube so
that it's just touching her hair and stomach/erase any portion that's
over top of frame/copy/paste splash for the last time/label splash 4/
place this splash higher still so that part of her back and some of
her hair is covered/erase all that is outside of the frame.

you should have 4 splash layers/turn off all but the first one/that's
the one that's underneath the tube

copy/paste the turtle/resize to your liking/place the turtle at the
very edge of the rectangle layer/add drop shadow/duplicate the turtle
and label turle2/place the turtle a little bit higher than the first
turtle/duplicate this turtle and label turtle3/place this turtle a
little higher still(like he's crawling towards the mermaid)he should
be on the frame/ duplicate this turtle and label turtle4/place this
one right at the mermaid's backside(showing that he's reach her/

you should have 4 turtle layers/now close all layers except the first
one

activate green circle layer/copy/paste paper of choice/go to green
circle layer/invert/go to paper layer and delete/merge down/add
drop shadow

activate white circle layer/copy/paste paper of choice/go to white
circle layer/invert/go to paper layer and delete/merge down/I chose to
leave the circle as is/while still activated copy/paste your tube and
place just the head shot in the circle/resize if needed/go to circle
layer/selection/invert/tube layer/delete/erase everything outside the
circle/duplicate the tube/ on top tube/blend hard light/move duplicate
beneath this layer/drop shadow on both

now add any other element you wish to use to make your tag your
own/add drop shadow on each element

add your watermark and copyright credits/give it a slight gradient
glow/either add some word art or a friend's name

Now to animate

since every thing is closed that needs to be/copy merge/paste into animation
shop/now got back to psp/close splash1 and turtle1 and open up the second
ones/copy merge and paste into animation shop after current frame/go back
to psp/close the 2nd layers and open the third and copy merge/paste into
animation shop after current frame/one last time/go to psp and close third
layers and open fourth layers and copy merge/paste into animation after
current frame/ you should have four frames/edit/select none/click on first
frame/animation/frame properties/50/click on 2nd frame/animation/frame
properties/75/click on 3rd frame/animation/frame properties/95/click on last
frame/animation/frame properties/135/view animation/if you like save as gif.


You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....riggsbee53@gmail.com
Here's another tag featuring Elias Chatzoudis