1/31/13

PTU Rebel Dezigns and Jennifer Janesko

It's Magic
This tutorial was written on January 31,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.

This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.



SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Jennifer Janesko.
Please do not use unless you have a license to do so.
You can get her tubes HERE


Scrapkit of Choice: I am using PTU Rebel Dezigns It's Magic
You can purchase it HERE ... Thank You Rene'


Template of choice:I am using Denz Designz Template #233
You can download it HERE...Thanks Denny


Mask of Choice: I am using Laurie Made Me Scraps Mask  #118
You can download it Here...Thanks


Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Park Avenue
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


     LET'S BEGIN
Open up Template and ShiftD and close original...delete
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background



On the following raster layers follow these directions...

activate lg rectangle layer/copy/paste paper of choice/resize
paper/selection/invert on rectangle layer/merge down/delete
on paper layer/copy/paste tube of choice/line up to the top
erase any overhang at the bottom/add drop shadow to all
activate left small rectangle layer/pick a color from paper4
color rectangle to match tag/add drop shadow/leave dotted
rectangle as is


activate right small rectangle layer/use same color as above
color rectangle to match tag/add drop shadow/leave dotted
rectangle as is


activate circle layer/pick another color from paper4/color
circle to match tag/add drop shadow/leave word art as is


activate medium rectangle/copy/paste paper of choice/resize
paper/selections/invert on rectangle/delete on paper layer
merge down/copy/paste element of choice/resize if needed
add drop shadow to all


leave both circle layers and dotted circles as is/add drop
shadow/copy/paste element of choice/resize as needed/add
drop shadow


activate sm strip/copy/paste paper of choice/resize paper
selections/invert on strip layer/delete on paper layer
merge down/add drop shadow/leave all other layers as is
add drop shadow


add any other elements you want to use to make your tag
you own/resize if needed/add drop shadow to each element
copy/paste your tube of choice/resize if needed/place your
tag where it will look best/add drop shadow/resize tag


add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.


You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....
riggsbee53@gmail.com

1/30/13

PTU Amy Marie and Celinart

Sweet As Candy
This tutorial was written on January 21,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.

Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Celinart.
Please do not use unless you have a license to do so.
You can get her tubes HERE
Scrapkit of Choice: I am using PTU Amy Marie SexNCandy2
You can purchase it HERE ...thank you Amy
Template of choice:I am using Toxic Desirez Template #172
You can download it HERE...Thanks Kristin
Mask of Choice: I am using Enchanted by Darkness Mask #55
You can download it HERE...Thanks
Wordart of Choice: I am using Blissfully Beth word art Sweet
As Candy....you can download HERE...Thank you Beth
Filters used:Eye Candy 4000 gradient glow - HERE
Font for Name is A&S Snappy Script
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


     LET'S BEGIN
Open up Template and ShiftD and close original...delete
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background
On the following raster layers follow these directions...
activate rectangle top layer/copy/paste paper of choice
resize paper/selection/invert on rectangle layer/delete on
paper layer/merge down/copy/paste element of choice/resize

if needed/add drop shadow to all
activate rectangle bottom layer/copy/paste paper of choice
resize paper/selection/invert on rectangle layer/delete on
paper layer/merge down/copy/paste element of choice/resize
if needed/add drop shadow to all
activate top square layer/copy/paste paper of choice/resize
paper/selection/invert on square layer/delete on paper
layer/merge down/add drop shadow/copy/paste element of choice
resize to fit/add drop shadow to all
activate bottom square layer/copy/paste paper of choice/resize
paper/selection/invert on bottom square layer/delete on paper
layer/merge down add drop shadow/copy/paste element of choice
resize to fit/add drop shadow to all
activate round rectangle top layer/copy/paste paper of choice
resize paper/selection/invert on rectangle layer/delete on paper
layer/merge down/add drop shadow/copy/paste element of choice
resize to fit/add drop shadow to all
activate round rectangle bottom layer/copy/paste paper of choice
resize paper/selection/invert on rectangle layer/delete on paper
layer/merge down/add drop shadow/copy/paste element of choice
resize to fit/add drop shadow to all
activate large round rectangle layer/copy/paste paper of choice
resize paper/selection/invert on rectangle layer/delete on paper
layer/merge down/add drop shadow/copy/paste element of choice
resize to fit/add drop shadow to all

activate circle layer/copy/paste paper of choice/resize paper
selection/invert on circle layer/delete on paper layer/merge
down/keep activated/copy/paste tube of choice/resize to fit
circle/delete on tube layer/blend/screen/add drop shadow to all
add any more elements you wish to use/resize if needed/add drop
shadow to all elements
copy/paste your tube of choice/resize if needed/place your
tag where it will look best/add drop shadow
you can either choose to use word art or not/copy/paste/resize if
needed/add drop shadow
add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.
You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....
riggsbee53@gmail.com

PTU Hungry Hills and Zlata M

Enchanted
This tutorial was written on January 30,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.



SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Zlata M.
Please do not use unless you have a license to do so.
You can get her tubes HERE

Scrapkit of Choice: I am using Hungry Hill Enchanted
You can purchase it HERE ... Thanks Alison

Template of choice:I am using Additive Pleasure Template #98
You can download it HERE...Thanks Tamie

Mask of Choice: none
Filters used:Eye Candy 4000 gradient glow - HERE
Font for Name is Elegance
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to

use any of the supplies I used.


     LET'S BEGIN

Open up blank canvas 900x900/will resize later
copy/paste frame2 to canvas/copy/paste frame4 to canvas
resize frame4 by75%/click inside frame4/selections/modify
expand by 10/copy/paste paper of choice/selections invert
on frame/delete on paper layer/move paper layer underneath
frame4/keep activated/copy/paste closeup tube of choice
resize to fit frame/delete on tube layer/add drop shadow to
both frames


on tube layer/effect/xero/radiance with these
setting/click ok/add drop shadow to tube



now here is where we get creative/copy/paste any elements
you wish to use to make your tag your own/resize if needed
make sure you add drop shadow to all elements

copy/paste your tube of choice/resize if needed/place your
tag where it will look best/add drop shadow/resize your tag

add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.
You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....
riggsbee53@gmail.com

1/29/13

PTU Dees'Sign Depot and Pinuptoons

Peridot

This tutorial was written on January 29,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.



SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Pinuptoons.
Please do not use unless you have a license to do so.
You can get his tubes HERE

Scrapkit of Choice: I am using PTU Dees'Sign Depot Gem
Collection- Peridot...You can purchase it HERE ...Thanks Dee

Bling of Choice: I'm using Simone's Bling #80-the bling
series #010...download HERE Thanks Simone

Filters used:Eye Candy 4000 gradient glow - HERE
Xero - Radiance...HERE and AAA Frame - Foto frame...HERE
Font for Name is Placard Condensed
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


     LET'S BEGIN

open frame2/resize canvas to 800x834/click inside circle with
magic wand/selections/modify/expand by 10/copy/paste paper of
choice/selections/invert on frame layer/delete on paper layer
merge down/place paper layer underneath frame/keep activated
copy/paste closeup of tube/resize by 140%/delete on tube layer
xero/radiance with these setting/click ok/add drop shadow to
tube and frame



copy/paste frame1/click inside each window/selection/modify
expand by 8/copy/paste paper of choice/resize paper/selection
invert on frame layer/delete on paper layer/merge down/place
paper underneath frame/copy/paste elements of choice/place one

in each window of frame/resize if needed/add drop shadow to
elements and frame

copy/paste your tube of choice/resize if needed/place your
tube where it will look best/add drop shadow

now add any other elements to your tag to make it your own
resize if needed/add drop shadow to each element/also add
wordart of choice/resize/add drop shadow

On bottom layer/copy/paste paper of choice/resize
to fit canvas/place paper at the bottom/effects
AAA frame/Foto Frame with these setting/click ok


add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.

now to animate
you can either animate or not/I chose to add some bling to
my tag


copy/merge  and take to animation shop/find the bling
you want to use/my bling had 21 frames/so you need to add 21
frames to your tag


to do this go to edit/duplicate selected
five times to give you 17 frames/click on tag/go to duplicate
selected three times/you should have 21 frames


edit selectall on bling/copy bling/edit select all on you tag
paste into selected frame/place where you want your bling

I did this twice so that the bling could be at the top and bottom

view animations
If you like/save as gif

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....
riggsbee53@gmail.com

1/28/13

PTU LadyHawwk Designs and Gina King

Bumble
This tutorial was written on January 28,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.






SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Gina King.
Please do not use unless you have a license to do so.
You can get her tubes HERE

Scrapkit of Choice: I am using PTU LadyHawwk Designs
Gina King IB 2-1...You can purchase it HERE ... Thanks Cathy

Template of choice:I am using Babes Designs
Babes Designz is no longer available,

please use another template...Thanks Babes
Mask of Choice: I am using Design by Vaybs Mask #131
You can download it Here...Thanks Vaybs

Filters used:Eye Candy 4000 gradient glow - HERE
Font for Name is Bradley Gratis
Copy write is always done in Pixelette  HERE
animation shop
Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


     LET'S BEGIN

Open up Template and ShiftD and close original...delete
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background



On the following raster layers follow these directions...
activate large square layer/copy/paste paper of choice/resize
paper/selection/invert on rectangle layer/delete on paper
layer/merge down/add drop shadow


copy /paste element of choice
duplicate/mirror/merge down/duplicate flip/add drop shadow

activate rectangle layer/copy/paste paper of choice/resize
paper/selection/invert on rectangle layer/delete on paper
layer/merge down/add drop shadow/copy/paste element of choice
resize to fit/duplicate/mirror/add drop shadow

activate thin rectangle layer/copy/paste paper of choice/resize
paper/selection/invert on thin rectangle layer/delete on paper
layer/merge down/add drop shadow

activate circle layer/copy/paste paper of choice/resize paper
selection/invert on circle layer/delete on paper layer/merge
down/keep activate/copy/paste close up tube/resize if needed
delete on tube layer/add drop shadow/copy/paste element of
choice/resize/place over top of tube/lower opacity to 50%
activate 2 square layer/make gradient with a dark and light
color/fill in both squares/copy/paste element of choice

resize to fit
duplicate the square row/color every other square black/color
the other square yellow/now on the duplicate layer go the
opposite way and start with the yellow color of every other
one/then do the black/now your gonna separate the double line
so that you have four lines/two starting in black and two
starting in yellow(see tag)

copy/paste word art that's in the kit/change the color to
match the tag/add drop shadow

copy/paste your tube of choice/resize if needed/place your
tag where it will look best/add drop shadow

add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.


Animation
close off the first square block and the third square block
copy merge tag/take to animation shop and paste


go back and close the second and fourth square boxes and open the first
and third square boxes/paste after the layer in animation


shop/edit/select all/animation/frame property/30

view your tag/if you're satisfied save your tag
You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....
riggsbee53@gmail.com

FTU Bea's Creation and Zindy Nielsen

Beautifully Broken
This tutorial was written on January 28,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.


SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Zindy Nielsen.
Please do not use unless you have a license to do so.
You can get her tubes HERE

Scrapkit of Choice: I am using Bea's Creations Is This Love
Bea has taken doen her blog,please use another scrap kit...Thanks Bea

Template of choice:I am using Kandi Kisses Temp2 for Tagger Den
You can download it HERE...Thanks Kandi

Mask of Choice: I am using mask #10 by Ginny
You can download it Here...Thanks G
inny
Filters used:Eye Candy 4000 gradient glow - HERE
Font for Name is Brad
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


     LET'S BEGIN
Open up Template and ShiftD and close original...delete
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background


On the following raster layers follow these directions...
activate small red circle layer/copy/paste paper of choice
resize paper/selection/invert on small red circle layer
delete on paper layer/add drop shadow/diamond border as is
activate top black rectangle/keep as is/keep activated/copy
paste tube of choice/invert on top black rectangle/delete

on tube layer/add drop shadow on rectangle layer
activate bottom black rectangle/keep as is/keep activated/copy
paste tube of choice/invert on bottom black rectangle/delete
on tube layer/add drop shadow on rectangle layer

activate big circle layer/copy/paste paper of choice/resize
paper/selection/invert on big circle layer/delete on paper
layer/merge down/add drop shadow/copy/paste tube of choice
resize to fit/delete on tube layer/circle frame as is/add
drop shadow to frame

activate polaroid frame back layer/copy/paste tube of choice
resize/selection/invert on frame back layer/delete on tube
layer/leave polaroid frame as is/add drop shadow
leave texture circle layer as is/add drop shadow

change color on  pixel word
art using these setting

on word art layer add eye candy
gradient glow 2x to word art/change color of heart to
match tag


add any other elements you wish to use to my the tag your
own/add drop shadow to each element

add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.
You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....
riggsbee53@gmail.com

1/26/13

PTU Amy Marie and Lady Mishka

Emo Star
This tutorial was written on January 25,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.

SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Lady Mishka .
Please do not use unless you have a license to do so.
You can get her tubes HERE
Scrapkit of Choice: I am using PTU Amy Marie Emo Star
You can purchase it HERE ... Thank You Amy
Template of choice: I am using Additive Pleasures Emo Star
Template #77...You can download HERE...Thank You Tamie
Mask of Choice: I am using Designs by Vaybs Mask #128
You can download it Here...Thanks Vaybs
Filters used:Eye Candy 4000 gradient glow - HERE
Xero - Porcelain...HERE
Font for Name is Neuropol
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


     LET'S BEGIN
Open up Template and ShiftD and close original...delete
copyright layer/close all layers/copy/paste paper of choice
layers/load/save mask/locate mask/set with these settings
below/click ok


On the following raster layers follow these directions...

label all layers/it might be easier if layers are label
 
activate octagon layer/copy/paste paper of choice/resize paper
selections/invert on octagon layer/delete on paper layer/merge
down/copy/paste two element of choice/resize if needed/add a drop
shadow to all

activate square layer/copy/paste paper of choice/resize paper
selections/invert on square layer/delete on paper layer/merge
down/keep activated/paste tube of choice/resize if needed/delete
on tube layer/add a drop shadow to all

activate circle1 layer/copy/paste paper of choice/resize paper
selections/invert on circle1 layer/delete on paper layer/merge
down/ copy/paste element of choice/resize if needed/add a drop
shadow on all

activate copy of circle1 layer/copy/paste paper of choice/resize
paper/selections/invert on copy of circle1 layer/delete on paper
layer/merge down/ copy/paste element of choice/resize if needed
add a drop shadow on all

activate rectangle layer/copy/paste paper of choice/resize paper
selections/invert on rectangle layer/delete on paper layer/merge
down/copy/paste element of choice/resize if needed/duplicate
mirror/add a drop shadow to all

activate thin rectangle layer/copy/paste paper of choice/resize
paper/selections/invert on rectangle layer/delete on paper layer
add drop shadow

activate copy of thin rectangle layer/copy/paste paper of choice
resize paper/selections/invert on copy of rectangle layer/delete
on paper layer/add drop shadow

activate oval layer/copy/paste paper of choice/resize paper
selections/invert on copy of rectangle layer/delete on paper  layer
merge down/copy/paste element of choice/resize if needed/add drop
shadow to all/change all star layers to black


activate circle3 layer/copy/paste paper of choice/resize
paper/selections/invert on circle3 layer/delete on paper

layer/keep activated/copy/paste tube of choice/delete on
tube layer/effects/xero/porcelain/with these setting/add drop shadow

On word art/change color to pink and add gradient glow 2x/add
drop shadow


copy/paste your main tube/place where you think it
will look best/add drop shadow
add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....
riggsbee53@gmail.com


PTU DeeSign Depot and Cuddy Rigor Mortis

Loves A Hoot
This tutorial was written on January 25,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.


SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Cuddy Rigor Mortis.
Please do not use unless you have a license to do so.
You can get his tubes HERE

Scrapkit of Choice: I am using PTU Dees'Sign Depot Loves A Hoot
You can purchase it HERE ... Thank You Dee

Template of choice:none
Mask of Choice: I am using Vixpsp Mask 330
You can download it Here...Thanks Vix

Filters used:Eye Candy 4000 gradient glow - HERE
Font for Name is Ligurino
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


     LET'S BEGIN
open new image 800x800/copy/paste paper of choice/resize to
fit canvas/layers/load/save mask/find your mask and set with
these setting/click ok/delete background


copy/paste frame#5/copy/paste paper of choice/resize paper
selections/invert on frame layer/delete on paper layer/add

drop shadow to frame
copy/paste owl/add elements#5,#6 and #11 to inside of frame
to compliment the tube/on element #5/blend/screen/add drop
shadow to elements and tube

copy/paste frame#3/resize if needed/place in upper left corner
of frame5/copy/paste paper of choice/resize paper/selections
invert/on frame layer/delete on paper layer/add drop shadow
to frame

copy/paste same tube/mirror tube/resize if needed/place owl
so that the feet are sitting on top of frame/add drop shadow
to tube/add element 19/place underneath owl/add drop shadow
copt/paste frame#1/copy/paste paper of choice/resize paper
selections/invert on frame layer/delete on paper layer/move
paper underneath frame/copy paste mouse on top of frame/resize
if needed/add drop shadow to tube and frame

add any other elements you wish to use to make the tag your own
add drop shadow to each element/resize if needed/copy/paste
whichever word art you wish to use/place where it will look best
add drop shadow

add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.
You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....
riggsbee53@gmail.com

PTU Chichi Designz and Jessica Dougherty

Oops
This tutorial was written on January 21,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.





SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Jessica Dougherty.
Please do not use unless you have a license to do so.
You can get her tubes HERE
Scrapkit of Choice: I am using PTU ChiChi Designs IB Jessica
Dougherty 42-2...You can purchase it HERE
Template of choice:I am using Additive Pleasure Template #98
You can download it HERE...Thanks Tamie
Mask of Choice: I am using Weescotlass Creations #241
You can download it Here...Thanks Vix
Filters used:Eye Candy 4000 gradient glow - HERE

Xero- Radiance and Xero Frittillary...HERE
Font for Name is Redressed
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


     LET'S BEGIN
Open up Template and ShiftD and close original...delete
copyright layer/close all layers/copy/paste paper of choice

resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background

On the following raster layers follow these directions...
activate rectangle layer/copy/paste paper of choice
resize paper/selection/invert on rectangle layer/delete on
paper layer/add drop shadow
activate long rectangle layer/copy/paste paper of choice
resize paper/selection/invert on rectangle layer/delete on
paper layer/add drop shadow
activate circle layer/copy/paste paper of choice/resize
paper/selection/invert on circle layer/delete on paper
layer/add drop shadow
activate large circle layer/copy/paste paper of choice/resize
paper/selection/invert on large circle layer/delete on paper
layer/keep activate/copy/paste closeup tube of choice/delete
on tube layer/add circle fame/resize if needed/add drop shadow
activate thin rectangle layer/copy/paste paper of choice/resize
paper/selection/invert on thin rectangle layer/delete on paper
layer/add drop shadow
activate square layer/copy/paste paper of choice/resize paper
selection/invert on square layer/delete on paper layer/keep

activated/copy/paste tube/resize if needed/place the part of
the tube you want to show/delete on tube layer/erase all excess
tube that is hanging over canvas/selections/none/xero/radiance
 with these setting/leave frame as is/add drop shadow

activate fat rectangle layer/copy/paste paper of choice/resize
paper/selection/invert on fat rectangle layer/delete on paper
layer/add drop shadow
activate square2 layer/copy/paste paper of choice/resize paper
selection/invert on square2 layer/delete on paper layer/keep
activated/copy/paste tube/resize if needed/place the part of
the tube you want to show/delete on tube layer/erase all excess
tube that is hanging over canvas/selections/none/xero/fritillary
with these setting/leave frame as is/add drop shadow

add any other elements (including the word art) you wish to use
add drop shadow to each element/place where you think it will
look best
copy/paste your tube of choice/resize if needed/place your tube
where it will look best/add drop shadow

add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.
You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....
riggsbee53@gmail.com



1/21/13

PTU LadyHawwk Designs and Markia

Kinky Valentine

This tutorial was written on January 20,2013. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.




SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Marika.
Please do not use unless you have a license to do so. 
You can get her tubes HERE

Scrapkit of Choice: I am using PTU LHD Mini Valentine 
You can purchase it HERE ...Thank you LadyHawwk

Template of choice:I am using Divine Intentionz #316
You can download it HERE...Thank You Missy

Mask of Choice: I am using Vix Mask Valentine #5
You can download it Here...Thanks Vix

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Phatt Pheddy
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.


my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.


     LET'S BEGIN

Open up Template and ShiftD and close original...delete 
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background




                                    On the following raster layers follow these directions...

                                activate glittered rectangle layer/recolor to match paper 5
                                add drop shadow

                                activate rectangle layer/copy/paste paper5/resize paper
                                selection/invert on rectangle layer/delete on paper layer
                                add drop shadow/change the blend mode of the pixel words
                                to normal

                                leave glittered circle as is/add drop shadow/activate cirle1 
                                layer/copy/paste paper of choice/resize paper/selection
                                invert on circle1 layer/delete on paper layer/add drop shadow
                                copy/paste elements of choice/add drop shadow to all

                                activate rectangle2 layer/copy/paste paper of choice/resize
                                paper/selection/invert on rectangle2 layer/delete on paper
                                layer/add drop shadow

                                activate cirle2 layer/copy/paste paper of choice/resize paper
                                selection/invert on circle2 layer/delete on paper layer/add 
                                drop shadow/keep activated/copy/paste closeup tube of choice
                                resize if needed/selections/invert on circle layer/delete on
                                tube layer/add drop shadow 

leave all other layer as is/activate gradient circle layer/copy
paste tube of choice/resize to fit/invert on gradient layer
delete on tube layer/duplicate tube/on original tube layer/blend
hard light/on duplicate layer/place underneath/lower opacity to
32%/add drop shadow to all

                            activate small circle layer/copy/paste tube of choice/resize to 
fit/invert on small layer/delete on tube layer/duplicate tube
on original tube layer/blend/overlay/on duplicate layer/place 
underneath/lower opacity to 80%/add drop shadow to all

                           any any other elements to wish to use to make the tag your own
resize if needed/add drop shadow to all elements

                               add your watermark and copyright credits/give it a slight 
gradient glow ...now give your tag to a friend.

                                      You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

PTU Diva Designs and Jose Cano

Shower My Love

This tutorial was written on January 20,2013. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a working 
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other 
Paint Shop Pro versions.




SUPPLIES NEEDED

Tube of choice: I'm using the awesome work of Jose Cano.
Please do not use unless you have a license to do so. 
You can get his tubes HERE

Scrapkit of Choice: I am using PTU Diva Designs-Always Remember 
You can purchase it HERE ...Thank you Mandy

Template of choice:I am using one of mine Template #107
You can download it HERE...Please do not share

Mask of Choice: I am using Vix Mask Valentine #13
You can download it Here...Thanks Vix

Filters used:Eye Candy 4000 gradient glow - HERE

Font for Name is Chopin Script 
Copy write is always done in Pixelette  HERE


Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.


my tag is just a guide...please use your imagination 
and make the tag your own you do not have to 
use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete 
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background




On the following raster layers follow these directions...

activate rectangles layer/copy/paste paper of choice
resize paper/selection/invert on rectangle layer/delete on 
paper layer/add drop shadow

leave glittered circle as is/add drop shadow/activate circle 
layer/leave layer as is/copy/paste element of choice/resize
to fit/add drop shadow/recolor shower hearts to match tag
add drop shadow

activate square1 layer/copy/paste paper of choice/resize
paper/selection/invert on square1 layer/delete on paper
layer/add drop shadow/copy/paste element of choice/resize
to fit/add drop shadow

activate square2 layer/copy/paste paper of choice/resize
paper/selection/invert on square2 layer/delete on paper
layer/add drop shadow

activate square3 layer/copy/paste paper of choice/resize
paper/selection/invert on square3 layer/delete on paper
layer/add drop shadow/copy/paste element of choice/resize
to fit/add drop shadow

color your ribbons and word art to match your tag/add drop
shadow to all

copy/paste your tube of choice/resize if needed/place your 
tag where it will look best/add drop shadow

add your watermark and copyright credits/give it a slight 
gradient glow ...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to.... riggsbee53@gmail.com

PTU Hungry Hills and Zindy Nielsen

Sweet Lies
This tutorial was written on January 20,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.

This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.



SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Zindy Nielsen.
Please do not use unless you have a license to do so.
You can get her tubes HERE
Scrapkit of Choice: I am using PTU Hungry Hills Sweet
Little Lies... You can purchase it HERE ...Thank you Ali
Mask of Choice: I am using Weescotlass Creations #254
You can download it Here...Thanks Chell
Filters used:Eye Candy 4000 gradient glow - HERE
Font for Name is Quickier Demo
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


     LET'S BEGIN
Open up Template and ShiftD and close original...delete
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background



On the following raster layers follow these directions...
To begin you need to make a cluster frame,because I can not
supply the one I made/copy/paste frame of choice/now choose
any elements you want to make the frame/be creative/every
tag should be different,but yet similar to mine/add drop
shadow to each element
once your cluster is made/copy/paste either a paper or a
element for inside the frame/if you use a paper/copy/paste
paper/resize paper/selections/modify/expand by 8/invert
on frame layer/delete on paper layer/place underneath frame
add drop shadow to frame
keep this layer activated/copy/paste tube of choice/resize
if needed/place where it will look best/add drop shadow
add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.
You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....
riggsbee53@gmail.com

1/18/13

PTU Amy Marie and Lady Mishka

Punky Love
This tutorial was written on January 18,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.




SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Lady Mishka.
Please do not use unless you have a license to do so.
You can get her tubes HERE
Scrapkit of Choice: I am using PTU Amy Marie Punktine Day
You can purchase it HERE ..Amy
Template of choice:I am using my own Punky Love #105
Please do not share....You can download it HERE
.
Mask of Choice: I am using Weeslasscot Creation #241
You can download it Here...Thanks Chell
Filters used:Eye Candy 4000 gradient glow - HERE
Font for Name is Andriko
Copy write is always done in Pixelette  HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


     LET'S BEGIN
So you can have room to work resize canvas to 900x900/you
will resize at the end before you add your © and watermark
Open up Template and ShiftD and close original...delete
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background
On the following raster layers follow these directions...
activate rectangle1 layer/copy/paste paper of choice/resize
paper/selection/invert on rectangle1 layer/delete on paper
layer/merge down/add drop shadow
merge down on first rectangle1 frame to second rectangle2
frame/leave as is
activate rectangle2 layer/copy/paste paper of choice/resize
paper/selection/invert on rectangle2 layer/delete on paper
layer/merge down/add drop shadow
merge down on first rectangle2 frame to second rectangle3
frame/leave as is
activate rectangle3 layer/copy/paste paper of choice/resize
paper/selection/invert on rectangle3 layer/delete
on paper layer/merge down/add drop shadow
merge down on first rectangle3 frame to second rectangle4
frame/leave as is
activate circle back layer/copy/paste paper of choice/invert
on circle back layer/delete on paper layer/merge down/keep
activated/copy/paste tube of choice/resize to fit/duplicate
on original layer/blend/screen/on duplicate layer place underneath
original layer/add drop shadow to all
activate circle frame layer/copy/paste paper of choice/resize
paper/selection/invert on circle frame layer/delete on paper
layer/merge down/add drop shadow
now swap out the top hearts with hearts that are within  the kit
resize until they are the same  size/add drop shadow/now merge down
the hearts on top one another/duplicate/mirror/flip/place where
bottom hearts are/delete top and bottom hearts
leave word art as is a place where it will look best after
placement of your main tube/or change it up by adding a
paper to it/add a slight drop shadow
copy/paste your main tube/place where it will look best
add drop shadow/crop your tag to remove all excess canvas
resize your tag 577x590
add your watermark and copyright credits/give it a slight gradient
glow ...now give your tag to a friend.
You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to.... riggsbee53@gmail.com


PTU LadyHawwk Designs and Michael Calandra

She's Got The Pinkatude
This tutorial was written on January 18,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working

knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.


SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Michael Calandra.
Please do not use unless you have a license to do so.
You can get his tubes HERE
Scrapkit of Choice: I am using PTU LHD Michael Calandra IB 23-1
You can purchase it HERE ..LadyHawwk
Template of choice:I am using Divine Intentions #311
You can download it HERE...Thank you Missy
Mask of Choice: I am using Weescotlass Creation #82
You can download it Here...Thanks Chell
Filters used:Eye Candy 4000 gradient glow - HERE
Font for Name is  Euclid Fraktur
Copy write is always done in Pixelette  HERE

Dropshadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


     LET'S BEGIN
So you can have room to work resize canvas to 900x900/you
will resize at the end before you add your © and watermark
Open up Template and ShiftD and close original...delete
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background


On the following raster layers follow these directions...
activate circle layer/copy/paste paper of choice/resize paper
selection/invert on circle layer/delete on paper layer/
merge down/add drop shadow
activate glittered layer/go to hue/saturation/lightness
with these setting/click ok


then go to adjust/add/remove
noise with these setting/click ok


activate circle2 layer/copy/paste paper of choice/resize
paper/selection/invert on circle2 layer/delete on
paper layer/merge down/add drop shadow
activate half circle layer/copy/paste paper of choice
resize paper/selection/invert on half circle layer/delete
on paper layer/merge down/add drop shadow
activate 3 frame background layer one at a time/copy/paste
element of choice/resize to fit/add drop shadow to each
on pink punk pixel words/go to hue/saturation/lightness 
with these setting/click ok

leave star and frame as is /add drop shadow
activate frame background layer/leave paper as is/copy/paste
tube of choice/resize to fit/duplicate/on original layer
blend/screen/on duplicate layer place underneath original
layer/leave frame layer as is/add drop shadow to all
leave word art as is a place where it will look best after
placement of your main tube/add a slight drop shadow
copy/paste your main tube/place where it will look best
add drop shadow/crop your tag to remove all excess canvas
resize your tag 585x566
add your watermark and copyright credits/give it a
slight gradient glow ...now give your tag to a friend.
You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....
riggsbee53@gmail.com

1/15/13

PTU Amy Marie and Very Many

Hearts and Roses
 
This tutorial was written on January 14,2013.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.
 
 

SUPPLIES NEEDED
Tube of choice: I'm using the awesome work of Very Many.
Please do not use unless you have a license to do so.
You can get her tubes HERE
 
Scrapkit of Choice: I am using PTU Amy Marie Scraps
Hearts and Roses...You can purchase it HERE ..Amy
 
Template of choice:I am using Denz Designz Template #168
You can download it HERE...Thank you Denny
 
Mask of Choice: I am using Insatiable Dreams Mask 298
You can download it Here...Thanks Cat
 
Filters used:Eye Candy 4000 gradient glow - HERE
 
Font for Name and wordart is Bradley Gratis  
Copy write is always done in Pixelette  HERE

Dropshadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination
and make the tag your own you do not have to
use any of the supplies I used.


     LET'S BEGIN
Open up Template and ShiftD and close original...delete
copyright layer/close all layers/copy/paste paper of choice
resize to fit canvas/layers/load/save mask/find your mask
and set with these setting/click ok/delete background
 
 
On the following raster layers follow these directions...

activate rectangle layer/copy/paste paper of choice/resize
selection/invert on rectangle layer/delete on paper layer
merge down/copy/paste element of choice/resize if needed

place toward top/duplicate/move to the middle/duplicate/move
toward the bottom/merge down each time/add drop shadow
activate long wide rectangle layer/copy/paste paper of choice
resize paper/selection/invert on rectangle layer/delete on
paper layer/merge down/add drop shadow
 
activate long thin rectangle merged layer/copy/paste paper
of choice/resize paper/selection/invert on long thin rectangle
layer/delete on paper layer/merge down/copy/paste element of
choice/resize if needed/add drop shadow
 
activate short rectangle layer/copy/paste paper of choice
resize paper/selection/invert on  short rectangle layer/delete
on paper layer/merge down/copy/paste element of choice/resize
if needed/add drop shadow to all
 
activate top square layer/copy/paste paper of choice/resize
paper/selection/invert on square layer/delete on paper layer
merge down/keep activated/copy/paste tube of choice/resize
delete on tube layer/add drop shadow/leave dotted frame as
is/add drop shadow to all
 
recolor hearts and dotted circles to match your tags/add
drop shadow
 
activate circle layer/copy/paste paper of choice/resize
paper/selection/invert on circle layer/delete on paper
layer/merge down/keep activated/copy/paste tube of choice
add drop shadow to all
 
activate circle frame layer/copy/paste paper of choice/resize
paper/selection/invert on circle frame layer/delete on paper
layer/merge down/add drop shadow
 
add any other element you wish to use to make your tag your
own/add drop shadow to each element
using font/write hearts and roses in two colors from tag
add drop shadow
 
copy/paste main tube to your tag/place where it will look
best/resize if needed/add drop shadow
 
add your watermark and copyright credits/give it a slight
gradient glow ...now give your tag to a friend.
 
You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
send to....
riggsbee53@gmail.com