12/27/11

FTU-Cuddy Rigor Mortis

Joyous Holiday

This tutorial was written on December 27th 2011. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a
working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.




SUPPLIES NEEDED

Tube of Choice: I'm using Cuddly Rigor Mortis. Please do not use without
a license to used. You Can get it Here

Christmas Card is from Tina Raparanta/Misstina get it Here

Word art of Choice: I'm using Christmas Word art from Doodles From My Noodle
Lori is no longer with us,May she rest in Peace, but her gorgeous work will
live on.Thanks Lori

Font for name is Kingthings2 and copy write is always done in Pixelette ...
Get them HERE

Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.


my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.Just have fun creating.
This will be quick and easy


     LET'S BEGIN

Open up the back card and ShiftD and close original
Decorate your card with your tube of choice and whatever word art you chose
You can also use a Christmas Scrapkit and use the elements from the kit
Add drop shadow on everything

Open up the front card and ShiftD and close original
On the front card add your tube and any message you like to say in font of
choice. Add drop shadow on every thing.

add your watermark and copyright credits...now give your tag to a friend.

To animate

Copy/paste back card into animation shop/go back and copy/paste front
card before back card.
Edit select all/Animation/frame properties and set at 100
View animation to see if it's to your liking and save as gif

You're done...thank you for trying my tutorial..if you try this
please send me a copy so that I can show case it on my blog

11/10/11

PTU Diva Designz

Witching Magic

This tutorial was written on November 7th 2011.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a working
knowledge of using  Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.



 
SUPPLIES NEEDED

Scrapkit of Choice: I am using Diva Designz PTU Scrap kit called Witching Dreams
You can purchase it HERE....Thank you

Mask of choice:I am using Weescotlass Creations WSL14 You can download it HERE...
Thank you Chelle

Template of Choice: I am using Toxic Desirez Scraps-Template #96
You can download it HERE....Thank you Kristin

Filters used:Eye Candy 4000 gradient glow..you can get it HERE

Font for name is Creepy and copy write is always done in Pixelette ...
Get them HERE

Drop shadow use through out H-2/V-2/O-65/B-6.00

Please leave a thank you when you downloading for supplies.


my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.



     LET'S BEGIN

Open up Template and ShiftD and close original...delete copyright layer
resize template 698x529 for space to work
close all layers/choose paper of choice/copy/paste and put underneath
brush layer/go to mask of choice with these setting and click ok

On the following raster layers follow these directions...

activate rectangle layer/copy/paste paper of choice/go to rectangle layer
invert/go to paper layer and delete/merge down/add drop shadow

activate word backlayer/add drop shadow

activate word layer/copy/paste paper of choice/or use color of choice
if you use paper/go to word layer invert/go to paper layer and delete/
if you use color- use magic wand to click on the word/go to color
pallet and choose a color close to the kit/flood fill with that color
add drop shadow

activate starslayer/copy/paste paper of choice/or color of choice
if you use paper/go to word layer invert/go to paper layer and delete/
if you use color- use magic wand to click on the word/go to color
pallet and choose a color close to the kit/flood fill with that color
add drop shadow

on your star layer add gradient glow with these setting below


 
copy/paste your main tube /position it where you want it/add drop shadow

now add the rest of your elements where you want them.make the tag your own.Have fun
with it/make sure you add a drop shadow to each element.

add your watermark and copyright credits...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
riggsbee53@gmail.com

10/27/11

PTU Mythical Designs and Gothique Starr

Gothic Touch

This tutorial was written on November 24th 2011. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a 
working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other Paint Shop Pro versions.






 


SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Gothique Starr..You can purchase
 her tubes HERE...Please do not use without a license to do so

Mask of choice:I am using Weescotslass Creations WSL89 You can download it HERE...
Thank you Chelle

Template of Choice: I am using Saras Sinful creations-Template #20
Sara blog has been removed..If you know where she is please email me
please use another template....Thank you Sara

Scrapkit of Choice: I am using Mythical Designs PTU Scrap kit called Gothic Touch
You can purchase it HERE....Thank you Mythical

Filters used: flaming pear-glare ...HERE and Eye Candy 4000 gradient glow..you can get it HERE


Font for word art & name is Piaguedeath and copy write is always done in Pixelette ...
Get them HERE


Drop shadow use through out H-2/V-2/O-65/B-6.00

Please leave a thank you when you downloading for supplies.


my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.


LET'S BEGIN

Open up Template and Shift D and close original...delete copyright layer

resize template 698x529 for space to work
close all layers/choose paper of choice/copy/paste and put underneath
rectangle layer/go to mask of choice with these setting and click ok

    
 On the following raster layers follow these directions...

activate rectangle layer/copy/paste paper of choice/go to rectangle layer
invert/go to paper layer and delete/merge down/add drop shadow


activate circle layer/copy/paste paper of choice/go to circle layer invert/
go to paper layer and delete/merge down/add drop shadow

activate rectangle1 layer/copy/paste paper of choice/go to rectangle1 layer
invert/go to paper layer and delete/merge down/add drop shadow

activate rectangle2 layer/copy/paste paper of choice/go to rectangle2 layer
invert/go to paper layer and delete/merge down/add drop shadow

activate ribbon1 layer/copy/paste paper of choice/go to ribbon1 layer
invert/go to paper layer and delete/merge down/add drop shadow


activate ribbon2 layer/copy/paste paper of choice/go to ribbon2 layer
invert/go to paper layer and delete/merge down/add drop shadow

on rectangle layer/copy/paste the tree/resize to fit/blend/screen/duplicate2x
so that the tree stands out

on the circle layer/copy/paste element3/resize to fit/lower opacity to 60%


on rectangle1 layer/copy/paste element 24/resize to fit/blend mode/over layer

on rectangle2 layer/copy/paste your closeup tube/resize to fit the way you want
lower opacity to 70%/apply flaming pear filter with these setting below


copy/paste your main tube /position it where you want it/add drop shadow

now add the rest of your elements where you want them.make the tag your own.Have fun
with it/make sure you add a drop shadow to each element.

add your watermark and copyright credits...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog

10/12/11

PTU Broken Sky Designs and Ismael Rac

I'll Be Your Treat

This tutorial was written on October 11th 2011. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a 
working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.


SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Ismael Rac..You can purchase
 his tubes HERE...Please do not use without a license to do so

Template of Choice: I am using Scrappity Scrap and More Halloween Template #9
You can download it HERE....Thank you Mirella

Scrapkit of Choice: I am using Broken Sky Designz PTU Scrap kit called Trick or Treat
You can purchase it HERE....Thank you Tonya

Filters used:Penta.com - Jeans - Xero- Fritillary and Porcelaid-
Eye Candy 4000- Gradient Glow
Get them HERE

Font for word art and name is Parseltongue and copy write is always done in Pixelette ...
Get them HERE


Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.


my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.



     LET'S BEGIN

Open up Template and Shift D and close original...delete copyright layer
close all layers except the background layer...the one we'll be working on
Choose paper of choice/paste underneath all layers.

On the following raster layers follow these directions...

activate large rectangle layer/copy/paste paper of choice/go to large rectangle layer
invert/go to paper layer and delete/merge down/add drop shadow

activate square layer/copy/paste paper of choice/go to square layer invert/
go to paper layer and delete/merge down/add drop shadow

activate half circle layer/copy/paste paper of choice/go to half circle layer invert/
go to paper layer and delete/merge down/add drop shadow

activate circle layer/copy/paste paper of choice/go to circle layer invert/
go to paper layer and delete/merge down/add drop shadow

activate small rectangle layer/copy/paste paper of choice/go to small rectangle layer
invert/go to paper layer and delete/merge down/add drop shadow

leave the following layers as is

Copy of vector1,2 and 3 and raster 9 and 10 and delete raster layer4

On square layer/copy/paste your close up tube on top/once placed take your freehand
selection tool and trace any part you do not want to show/on your tube layer go to
penta.com-jeans with these setting/click ok/add drop shadow
 

On circle layer/selection/float/defloat/invert layer/copy paste your smaller tube
position it where you want the part to show and then delete/remove any excess tube
go to xero- fritillary with these setting/click ok/now go to xero/porcelaid with
these setting/click ok/add drop shadow
 

 
copy/paste your main tube /position it where you want it/go to gradient glow with
these setting/click ok/ add drop shadow

now add the rest of your elements where you want them.make the tag your own.Have fun
with it/make sure you add a drop shadow to each element.

add your watermark and copyright credits...now give your tag to a friend.

You're done...thank you for trying my tutorial
please send me a copy so that I can show case it on my blog
riggsbee53@gmail.com

10/11/11

New Award

BEAUTI♥LICIOUS AWARD!
This award is for the Beautiful Women (and Men)
who grace us with their talents
in the Tagger Community.
The intent of this award is to pass it on
to the Designer, Tagger, or Artist
who has inspired you with their endless talent
and who has touched your heart.
There are many out there.
I received this award from Royal Designs by Coolfunlife
Check out her blog HERE

Let's see how far we can pass this on
♥HERE'S TO ALL YOU BEAUTIFUL PEOPLE!♥
I choose to pass this to:


Once you have received this award
Please pass it on to five blogs
to show some love
for those who truly are BEAUTIFUL.
 Let's see how far we can pass this on!!!

9/25/11

PTU Designz by Stina and Eugene Rzhevskii

Hallow EMO

This tutorial was written on September 24th 2011.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a 
working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.



SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Eugene Rzhevskii ..You can purchase
 his tubes HERE...Please do not use without a license to do so

Scrapkit of Choice: I am using Designz by Stina Coll-ab PTU Happy Hallow EMO
You can purchase it HERE....Thank you Stina

Mask of Choice: I'm using one of Insatiable Dreams #38...You can find it HERE
Put mask in mask folder..Thanks so much for the use of your Cat

Template of Choice: I'm using Dezigns by Ali #69. Ali is no longer in the Scrap
business. Please choose another template. We wish her much success in whatever
she does.She will be missed amongst the tagging world.Thanks Ali

Filters used:Mura's Meister -Copies/ Xero- Porcelain/Eye Candy 4000-Gradient Glow 

Font for name is Creep-ville, font for word art is Awakening 
and copy write is always done in Pixelette ...
Get them HERE


Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.


my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used,but by all means have fun
making your tag.



     LET'S BEGIN

Open Template/shift/D/ Close the original Template/delete credit layer
Image/ resize 700x700 /we will resize again at the end

go to last layer/copy/paste paper of choice/place below black circle layer
resize paper to fit canvas/now go to layers/load/save mask/load mask from
disk/ and find your mask of choice...with these setting see photo below....
go to layers/merge group

open black circle layer/copy/paste paper of choice/resize paper/on circle
layer/selection/float/unfloat/invert/go to paper layer and delete/layers
new raster layer on top of black circle layer/Text tool/background/foreground
white/size 10/font-awakening/Type out Happy Hallow EMO/Convert to raster/Object
center/selection/float/defloat on black circle/effect/mura's meister/copies
with these setting

 delete extra layer/selections/none/add drop shadow
On circles 4-3 and 2/one at a time/selections/float/defloat/invert/copy/paste
paper of choice/resize to fit/delete paper layer/selection/none/merge down/
place spider frame of choice on each of the small circles

open your tube and place a different part on each of the small circles/one at
a time/you may need to resize the tube to get it to fit the way you want.
Do the same with circle one/add xero porcelain with these setting
add your remaining elements to finish up your tag
add your main tube 
add copy right and your watermark
now give to a friend

thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it...riggsbee53@gmail.com

9/21/11

FTU Always Creations and Pinuptoons




This tutorial was written on September 17th 2011. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a
working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
 but can be adapted to use in other
Paint Shop Pro versions.


Things That Go Bump in the Night




SUPPLIES NEEDED

Scrapkit of Choice: Always Creations-Halloween for You. you can get it HERE
please follow my TOU

Tube of Choice: I am using the awesome artwork of Pinup toons..You can purchase
his tubes HERE...Please do not use without a license to do so


Mask of Choice: I'm using one of Vix Halloween 2010 #1...You can find it HERE
Put mask in mask folder..Thanks so much for the use of your Vix

Template of Choice:I'm using Denz Designz #160.
You can get it HERE
Thank you Denny


ghost of choice or you can used mine. 
HERE  please follow my TOU

Filter of Choice:Eye Candy 4000-Gradient Glow-HERE
Font for name is Ash and copy write is always done in Pixelette ...
Get them HERE
 
Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.
my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.

     LET'S BEGIN

Open Template/ShiftD/delete original template/delete copyright layer
close all layers except background layer/copy/paste paper of choice/resize
go to layersload/save mask/find your mask/setup with these setting below

click ok/merge group.

activate shape2 layer/copy/paste paper of choice/go to effects/gradient glow with
these setting below(do this for each template layer)

activate shape1 layer/copy/paste paper of choice/go to effects/gradient glow with
these setting below/add the glow

activate rectangle layer/copy/paste paper of choice/go to effects/gradient glow with
these setting below/add the glow

activate circle1 layer/copy/paste paper of choice/go to effects/gradient glow with
these setting below/add the glow

activate circle2 layer/copy/paste paper of choice/go to effects/gradient glow with
these setting below/add the glow

place the web on top of circle2/resize web to fit/now copy/paste spider/resize
duplicate 4x moving the spider up a little each time until you get to the top
close copies until later

place the bats where you want them/add the ghost where you want it/add drop
shadow to them/ add the orange eyes/place the lids on top of the eyes/close the
lid layer until time to animate

activate all word art and change the colors to orange/add the glow
place your tube where you want it to be/resize/add drop shadow

resize tag if needed/Add your water mark and copyright/on the name add the same
gradient glow 2 times/duplicate and move over just a little/duplicate and move over
just a little again/merge down after each duplication so that the name is triple
(see my tag)

to animate
your first spider layer and the eyes should be open
all other spiders and lids closed
Copy merge/paste to animation shop as a new layer

back to paint shop pro/close first spider layer and eyes
open up the next spider layer and lids copy merge/paste after current tag

back to paint shop pro/close second spider layer and lids
open up the next spider layer and eyes copy merge/paste after current tag

back to paint shop pro/close third spider layer and eyes
open up the next spider layer and lids copy merge/paste after current tag

back to paint shop pro/close fourth spider layer and eyes
open up the next spider layer and eyes copy merge/paste after current tag

you should have 5 layers/three with eyes and two with lids
edit select all/animation/frame property 100
save as gif

now give to a friend

thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it...riggsbee53@gmail.com



9/16/11

PTU Aussie Scrap Designs and Michael Calandra

Creepy Hollow

This tutorial was written on September 15th 2011. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a 
working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.





SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Michael Calandra..You can purchase
 his tubes HERE...Please do not use without a license to do so

Scrapkit of Choice: I am using Aussie Scrap Designs PTU Scrap kit called Creepy Hollow
You can purchase it HERE....Thank you Gail

Mask of Choice: I'm using one of Vix Halloween 2010 #10...You can find it HERE
Put mask in mask folder..Thanks so much for the use of your Vix

Filters used:Screen work - Fabric Weave...get it HERE

Font for name is Blue Highway D Type and copy write is always done in Pixelette ...
Get them HERE


Drop shadow use through out H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.


my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.



     LET'S BEGIN

Open Up a new raster layer 700x630.floodfill white/Overtop of background layer/copy
paste paper of choice from kit/resize to fit layer...now go to layers/load/
save mask/load mask from disk/ and find your mask of choice...with these setting
see photo below....go to layers/merge group 




go to preset shape/with setting below/make a rectangle about the size as mine(see tag)
convert to raster/choose paper of choice from kit/resize to fit the rectangle layer/
with magic wand click on rectangle/on rectangle layer/selection/invert/go to paper
layer and delete.

 

copy/paste spider web from kit/place on left side of rectangle near the edge/place
spider near the edge at the top/duplicate 8x and move a spider down a little each
time so that you have a trail of the spider going down the page/close all the
spiders except the first spider

open/copy/paste/resize the scare cross/place on the left side on top of the trail
of spiders/add drop shadow
add the bat and duplicate 2x/place in the upper right corner and spread the bats
out/place the cloud over two of them.
copy/place/resize and place the dying tree2 on the right hand size/add drop shadow
copy/place/resize and place the head stone over top the tree/add drop shadow

copy/paste the spider/place on right side of tomb stone/placespider near the edge
at the bottom/duplicate 8x and move a spider up a little each time so that you
have a trail of the spider going up the tomb stone/close all the spiders except
the first spider
copy/paste/resize your tube and place behind tombstone/duplicate and close this layer
noe go to screenwork/fabic weave/change the blend mode to screen/open the duplicate
and lower the opacity to 60%.now open your tube and select the top part and paste
on the other side on top of the cross/add drop shadow and change blend mode to hard light.

Add the wordart Creepy hollow /add drop shadow/resize your tag
Add your water mark and copyright

to animate

Copy merge/paste to animation shop as a new layer
back to paint shop pro/close two spider layers and
open up the next two spider layers
copymerge/paste after current tag
continute until all spider layers are copy into animation shop
you should have 8 layers
edit select all/animation/frame property 100
save as gif

now give to a friend

thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it...riggsbee53@gmail.com

9/13/11

PTU Broken Sky Designs and Michael Calandra

Haunted by Memories

This tutorial was written on September 12th 2011. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a
working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9
,but can be adapted to use in other
Paint Shop Pro versions.



SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Michael Calandra.
You can purchase his tubes HERE...you will need a tube that's laying or crawling
Please do not use without a license to do so


Scrapkit of Choice: I am using a Broken Dreams Designs PTU Scrapkit- Haunted By Memories .
 You can purchase it HERE....Thank you Tonya

Mask of choice:I'm using a mask by Chichi #1. You can find it HERE..thank you Cindy

Font for name is Inked God and copy write is always done in Pixelette ...
Get them HERE

Filter: Eye Candy 4000/Gradient Glow..Get it Here
Drop shadow use throughout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.


my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.this will be a quick tag.


     LET'S BEGIN



open new raster layer 700x700/copy/paste paper of choice from kit/go to layers/load/
save mask/load mask from disk/find your mask and load with these setting then merge grou
p


open frame1/move down a little/with magic wand click inside frame/selection/modify by 10
copy/paste paper of choice/resize/go to frame layer and invert/then paper layer and delete

take you tube/copy/paste and place on top the frame on the left/duplicate/place this copy
underneath the frame/now take your ereaser tool and erase any area that needs to be take
off the top of the frame.

add any more elements you wish to use/make sure you add a drop shadow to each element.
place your main tube where you want it/add drop shadow.(see my tag if needed)

resize your tag/Add your copyright and watermark-(I put a slight gradient glow on mine)
now it's ready to give to a friend

thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it...riggsbee53@gmail.com

PTU Broken Sky Designs and Duncan Long

Freddy's Curse

This tutorial was written on September 12th 2011. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a 
working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.




SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Duncan Long.
You can purchase his tubes HERE...you will need a tube that's laying or crawling
Please do not use without a license to do so

Scrapkit of Choice: I am using a Broken Dreams Designs PTU Scrapkit- Haunted House .
 You can purchase it HERE....Thank you Tonya

Font for name is Creep ville and copy write is always done in Pixelette ...
Get them HERE

Drop shadow use throughout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.


my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.



     LET'S BEGIN

first open up frame1/take your magic wand and click inside/copy/paste paper 8/
resize to fit the frame/close off/selection/modify by 6/go to frame layer and
invert/now go to paper layer and delete/select none/minimize this for now.

open up the haunted house/shift D and close original layer/resize 700x688/move
house a little lower on canvas/close off for now/copy/paste bllodsplatter1/duplicate
mirror/duplicate/flip/duplicate mirror/merge visible all four layers.This is your mask.

open up your house layer and copy/paste the bloody chain/resize to fit the wood slates
on the house. If you place on top of the railings then use your eraser tool to erase the
prts on top so it looks like it's underneath. once that is done merge visible all chain layers
then merge down on top of the house

now open up the paper layer you previous did.you're going to used just the paper/copy/paste
above house layer and place toward the top (see my tag for directions)resize and go to
adjust/sharpen so the words stand out.open the hand and resize until you get the size you want.
place the hand under the house on the right hand side/duplicate the hand four more time/each time
bringing it out from underneath the house more and more/once you paste the fifth one/close all of
them except the first one.

add any more elements you wish to use/make sure you add a drop shadow to each element.
place your main tube where you want it/add drop shadow.(see my tag if needed)

resize your tag/Add your copyright and watermark-(I put a slight gradient glow on mine)

To animate

copy/merge all layers except the 4 duplicates of the hand/go to animation shop and paste as
new layer/go back and close the first hand and open the second hand and paste in animations
shop after current frame/repeat until you do the fourth copy of the hand/now go back and
close the fourth layer and reopen the third layer/copy merge and paste in animation shop
behind current layer/ do this until you get to the original hand layer/you should have 9
frames/go to edit/select all/animation/frame properties and change to 100


view animated/if happy save as gif/now it's ready to give to a friend

thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it...riggsbee53@gmail.com

9/12/11

PTU Hungry Hills and Pinuptoons


Autumn Leaves

This tutorial was written on September 10th 2011. 
Any similarities to another tutorial is purely coincidental.

All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a 
working knowledge of using Paint Shop Pro.

This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other

Paint Shop Pro versions.


                                                                     SUPPLIES NEEDED


                                Tube of Choice: I am using the awesome artwork of Pinuptoons..
                      You can purchase his tubes HERE...you will need a closeup and regular tube
                                            Please do not use without a license to do so


                     Scrapkit of Choice: I am using a Sarah Hungry Hills PTU Scrapkit- Subtle Autumn .
                                         You can purchase it HERE....Thank you Sarah


                              Template of Choice: I'm using a template by Blissfully Beth #9. 
                                        You can get it HERE. Thank you  for the Share Beth


                                 Mask of Choice: I'm using Creative Misfit Autumn Collection. 
                               Place in your mask folder. You can get it HERE. Thanks Aqua

                              Filter Used:Eye Candy 4000-Gradient Glow...You can get it HERE
                            Gradient: Autumn Gradient from Eleven Sword...You can get it HERE

                                         Font for name is HT Trattona and copy write is always 
                                                   done in Pixelette ... Get them HERE


                                                         animation fallen leaves...Here


                                              Drop shadow use through out H-2/V-2/O-50/B-5.00
                                      Please leave a thank you when you downloading for supplies.

                                       my tag is just a guide...please use your imagination and make
                                    the tag your own you do not have to use any of the supplies I used.

                                                                                LET'S BEGIN
                        Open template/Image resize all layer to 600x600/shiftD/close original template.
                     Remove background and credits.Close out every layer. Choose paper of choice/
                      paste underneath all layers.Go to layers/load/save mask/load mask from disk/
                              find your mask of choice and paste with these setting.merge group


Do the following task to layers 1-7/merge down after each task and add a drop shadow

copy/paste paper of choice/go to the layer/invert/go to paper layer and delete

put the tree behind layer 6/add a drop shadow.

add any other elements you wish to use/make sure you add a drop shadow to each element.
place your main tube where you want it/add drop shadow.(see my tag if needed)

Resize if needed/Add your copyright and watermark-(I put a slight gradient glow on mine)


now it's time to animate

copy merge/paste your tag into animation shop/open up your animation leaves into
animation shop/duplicate your tag with the same number of layers as the animation
you should have 27 layers/edit/select all/animation/frame properties/30
save as gif

thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it...riggsbee53@gmail.com

9/10/11

PTU Sunshine Daze and Suzanne Woolcott

Any Day Now 

This tutorial was written on September 10th 2011. 
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a 
working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,

but can be adapted to use in other
Paint Shop Pro versions.



SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Suzanne Woolcott.
You can purchase her tubes HERE...you will need a 2 images and regular tube
Please do not use without a license to do so

Scrap kit of Choice: I am using a Sunshine Daze PTU Scrap kit- Any Day Now.
 You can purchase it HERE....Thank you Dawn

Template of Choice: I'm using a template by Denz Designs # 14. You can get it HERE.
Thank you  for the Share Denny

Mask of Choice: I'm using Designs by Vaybs #131. Place in your mask folder.
You can get it HERE. Thanks Vaybs

Filter Used:No Filter was used

Font for name is Ms UI Gothic and copy write is always done in Pixelette ...
Get them HERE



  Drop shadow use through out H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.


my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.



     LET'S BEGIN

Open template/Image resize all layer to 650x650/We will resize later/shift D/
close original template/Remove background and credits.Close out every layer.
Choose paper of choice/paste underneath all layers.Go to layers/load/
save mask/load mask from disk/find your mask of choice and paste
with these setting.merge group


activate circle2 back layer/copy/paste image of choice on the part that you
want to show/go to circle2 back layer/invert/go to paper layer and delete/merge down
change blend mode to soft light
do the same thing with circle1 back layer/change blend mode to screen

activate square layer/copy/paste paper of choice/go to square layer/invert/
go to paper layer and delete/merge down/place you main tube on top of the
white frame/add drop shadow

activate small square layer/copy/paste paper of choice/go to small square layer/
invert/go to paper layer and delete/merge down

leave all the frames white and remove the three flower layers
on the circle2 layer/go to present/ellipse/create on vector/width 1/foreground black
background null and draw a circle/new raster layer/type words of choice/convert to raster
delete present layer and blank layer.

add any elements you wish to use/make sure you add a drop shadow to each element.
place your main tube where you want it/add drop shadow.(see my tag if needed)
resize you tag if still to big.

Add your copyright and watermark/now it's ready to give to a friend

thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it... riggsbee53@gmail.com

9/9/11

PTU Mythical Designs and Jennifer Janesko

Autumn Glory

This tutorial was written on September 9th 2011.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright.
Please do not claim as your own.
This tutorial writer assumes you have a
working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.



SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Jennifer Janesko..
You can purchase her tubes
HERE...you will need a closeup and regular tube
Please do not use without a license to do so

Scrapkit of Choice: I am using a Mythical Designs PTU Scrapkit- Autumn Glory.
 You can purchase it
HERE....Thank you Sally

Template of Choice: I'm using a template by Essence of Creativity #38. You can get it HERE.
Thank you  for the share Yvette

Mask of Choice: I'm using Creative Misfit Autumn Collection. Place in your mask folder.
You can get it
HERE. Thanks Tina

Filter Used:Eye Candy 4000-Grandient Glow...You can get it HERE
Font for name is Monika and copy write is always done in Pixelette ...
Get them
HERE

Dropshadow use througout H-2/V-2/O-50/B-5.00
Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.


     LET'S BEGIN

Open template/Image resize all layer to 615x615/shiftD/close original template.
Remove background and credits.Close out every layer. Choose paper of choice/
paste underneath all layers.Go to layers/load/save mask/load mask from disk/
find your mask of choice and paste with these setting.merge group


activate circle layer/copy/paste paper of choice/
go to circle layer/invert/go to paper layer 
and delete/merge down
activate square2 layer/copy/paste paper of choice
go to square2 layer/invert
go to paper layer and delete/merge down
activate square1 layer/copy/paste paper of choice
go to square1 layer/invert
go to paper layer and delete/merge down

keep activated/copy paste your close up
tube on top of square1 layer/add drop shadow 

and change blend mode to hard light.
activate rectangles layer/copy/paste paper of choice
go to rectangles layer/invert
go to paper layer and delete/merge down
add any elements you wish to use
make sure you add a drop shadow to each element.

place your main tube where you want it

add drop shadow.(see my tag if needed)
Add your copyright and watermark-
(I put a slight gradient glow on mine)
for the finish touch I took the sparkles 

and copy/paste on top of the tag
now it's ready to give to a friend

thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it..   
riggsbee53@gmail.com

9/7/11

FTU Bea's Creations and Barbara Jensen

Fukitol

This tutorial was written on August 6th 2011.
Any similarities to another tutorial is purely coincidental.
All my tutorial are register with My Free Copyright. 
Please do not claim as your own.
This tutorial writer assumes you have a 
working knowledge of using Paint Shop Pro.
This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other
Paint Shop Pro versions.


 
SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Barbara Jensen..It was a bonus tube
If it's not available,use anther tube from her. You can purchase her tubes HERE...
Please do not use without a license to do so

Scrapkit of Choice: I am using a Bea's Creations FTU Scrapkit -Spring.
You can download it HERE....Thank you Bea

Template of Choice: I'm using a template by Just Fi called Fukitol. You can get it HERE.
Thank you Fi for the Share

Mask of Choice: I'm using Insatiable Dreams Mask #2. Place in your mask folder.
You can get it HERE...Thanks Cat

Font for name is Chopin Script and copy write is always done in Pixelette ...
Get them HERE

Dropshadow use througout H-2/V-2/O-50/B-5.00

Please leave a thank you when you downloading for supplies.

my tag is just a guide...please use your imagination and make the tag your own
you do not have to use any of the supplies I used.



LET'S BEGIN

Open template/shiftD/close original template.Remove background and credits.Close
out every layer. Choose paper of choice/paste underneath all layers. Go to layers/
load/save mask/load mask from disk/find your mask of choice and paste with these
setting.merge group.


starting with blur mask layer.Change the color to reflect your tube.I also changed
the mask layer too to the same color.

activate small black circle.Copy/paste paper of choice.go to selection/ invert circle
layer and then go to paper layer and delete/ merge down.leave small striped layer as is.

leave pink circles/pink glitter circles as is.On large black circle/activate.
Copy/paste paper of choice.go to selection/ invert circle layer and then
go to paper layer and delete/ merge down.

leave blur circle and blue glitter circle as is.I change the color on the word art to
purple/left the rectangle black and merge visible the whole thing to place it lower.
(see my tag for ference)


place your main tube on top of large circle/place it where you want it activate
large circle/I used the top part of the tube/go to selection/ invert circle layer and then
go to tube layer and delete/add drop shadow.

add any elements you wish to use/make sure you add a drop shadow to each element.
place your main tube where you want it/add drop shadow.(see my tag if needed)

Add your copyright and watermark-(I put a slight gradient glow on mine)
and give your tag to a friend
thank you for trying my tutorial..please send me a copy of what you did
so I can showcase it...riggsbee53@gmail.com