PTU Hungry Hill and Susanne Woolcott

This tutorial was written on July 15,2010.

Any similarities to another tutorial is purely coincidental.

All my tutorial are register with My Free Copyright.

Please do not claim as your own.

This tutorial writer assumes you have a working knowledge

of using Paint Shop Pro and Animation Shop

This tutorial was done in Paint Shop Pro9,but can be adapted 

to use in other Paint Shop Pro versions.

                                                                  SUPPLIES NEEDED

                     Tube of Choice: I am using the awesome artwork of Suzanne Woolcott..

You can purchase her tubes HERE 
  Please do not use without a license to do so

Scrapkit or colors of your choice, I'm using Sarah Hungry Hill Puddles PTU kit. 

No longer available  ... thank you Sarah

Mask of Choice: I'm using one of Sunf from Urban Fairytales # 20..You can find it HERE

Put mask in mask folder..Thanks so much for the use of your mask

Template of Choice: I am using one of Sara's from Sinful Pleasures #20..you can get it HERE...Thanks Sara

Font for name is Papyrus and copy write is always done in Pixelette ... Get them HERE

Effects Sqirlz Water Reflections...it's a free filter, you can get it HERE

Drop shadow use throughout H-2/V-2/O-50/B-6.72

Please leave a thank you when you downloading for supplies.

     LET'S BEGIN

Open up Template and ShiftD and close original...delete copyright layer

close all layers except the background layer...the one we'll be working on

Choose a paper of choice(I chose paper #4)/copy/paste...now go to layers/Load/

save mask/load mask from disk/ and find your mask of choice...with these setting

see photo below....go to layers/merge group/resize by 80%

Puddles

now make circle layer active/selection/modify/smooth with these setting(see photo below)

choose paper of choice(I chose paper #6) now resize to 

fit circle go to selection/invert and click ok/go to paper layer and delete/layers

merge/merge down/keep activated...copy/paste the word art on top of circle layer

while still on the circle layer go to selections invert/ then go to word art layer and delete

de-activate/add drop shadow.

now we're going to activate the rectangle layer and copy/paste your paper of choice
while still on the rectangle layer go to selections invert/ then go to paper layer and delete
layers/merge/merge down/add drop shadow

go to the rectangle2 and rectangle3 layer and repeat the same process as you did with the
previous layer...do the same with ribbon1 and ribbon2
make sure you resize all your layers by 80% after each copy/paste

now come the great part....it's time to decorate...you can either follow my tag or you can use
whatever element you chose to use. I used the water,ducks,tree,cloud w/ sun and tag
make sure you add a drop shadow to each element...I used H-1/V-1/H40/B-5.00

To animate or not is up to you..the filter is very easy to follow,but I will try to explain it.

ok because I wanted the water puddle to be animated and have it rain too...I used the
Sqirlz Water Reflections filter...first you need to close off your three ducks if you're
using them. Copy merge your tag and paste as a new layer...now save this tag as a jpg.
Now open up the filter and go to open and find your tag.Once the tag comes up, go to
reflect option/customize rain/snow with these setting

number of raindrops/snowflakes-1967
Length-70   brightness-255    softness-100
Depth of field-10    width-2    speed 0.4
transparency-50   direction variation-0   direction-213

now click on the Y picture and click on rain/snow/ripple combination
next click on the red ring and draw a line around the water area
once that's done click on the animation...if satisfied click on the gif
button and save as a gif...once your tag is saved go back to PSP and
close all layers except the ducks...copy merge/paste as a new layer
remove all the excess surrounding area and copy/paste to animation shop
once in animation shop find your tag that your saved(make sure it's the gif tag)
this tag has 20 frames so you need to duplicate the ducks to 20 frames
copy and paste the ducks into the tag on top of the water...once satisfied
with your animation save as gif.

You're done!!!
Thanks for trying my tutorial
If you use send me a copy so I can show case it...thanks

riggsbee53@gmail.com

PTU Hungry Hill and Pinuptoons - Coffee Date

Coffee Date

I am now a CT for Sarah Hungry Hill 
I've just finish doing a tutorial called Coffee Date.

from the scrap kit of the same name. 
It's a beautiful kit full of beautiful papers and elements.
So this tutorial is the results.

This tutorial was written on July 14 2010. 
Any similarities to another tutorial is purely coincidental.

All my tutorial are register with My Free Copyright. Please do not claim as your own.

This tutorial writer assumes you have a working knowledge of using Paint Shop Pro.

This tutorial was done in Paint Shop Pro9,but can be adapted to use in other

Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Pinuptoons..
 You can purchase his tubes at CDO HERE

Please do not use without a license to do so

Scrapkit of choice: I am using Sarah Hungry Hill PUT kit Coffee Date.
Sorry but this kit is no longer available...
please use another one....Thanks Sarah

Mask of Choice: I'm using mask #31 from Butterfly Nutterby Creations..
You can find it HERE

Put mask in mask folder..Thanks Butter

Template of Choice: I am using Creation by Sanie template#17..
you can get it HERE...Thanks Sanie

Word art by me you can download HERE

Font for name is Poor Richard and copy write is always done in Pixelette ... Get them HERE

Effects use gradient glow (eye candy 4000) get it HERE

Drop shadow use throughout H-2/V-2/O-50/B-6.72

Please leave a thank you when you downloading for supplies.

     LET'S BEGIN

Open up Template and ShiftD and close original...delete copyright layer

close all layers except the background layer...the one we'll be working on

Choose a paper of choice( I chose paper#12 )/copy/paste...now go to layers/Load/

save mask/load mask from disk/ and find your mask of choice...with these setting

see photo below....go to layers/merge group

now make circle layer active/go to selections/modify/smooth with these setting

see photo below/click ok/choose a paper of choice ( I chose paper 10 )/copy/paste and resize to fit

circle layer...go to selection invert/go back to paper layer and hit delete/layers/merge/merge down.

deactivate/add drop shadow.

now active rectangle layer/repeat smooth process/choose a paper of choice
 ( I chose paper 10 )/copy/

paste and resize to fit rectangle layer...go to selection invert/go back to paper layer and hit delete

layers/merge/merge down/de-activate. Activate frame layer and either use a paper of choice or color

(I chose #523100)repeat smooth process/flood fill frame with color/add drop shadow.

repeat the same process (noted above) with the second rectangle as you did with the first one.

Also repeat for the second frame too, don't forget to add drop shadow to frame.

now go back to your first rectangle layer and activate/copy and paste your tube of choice/position

the tube where just part of it is showing on the left side of the frame/go to selections/invert/delete

add drop shadow.

now for the square,square1 and square2 we are going to repeat the copy/paste paper process (see above)

Once that is done , we'll going to color the three frames for the squares. I used #a2793e..add dop shadow

Now comes the fun part. decorate you tag to your liking using the elements from the scrap kit.

I chose the table,chair,candle cup of java,teddy bear,both coffee jars.(see my tag for reference)

add a light shadow to these elements H-0/V-0/O-40/B-5...

now add your tube to the right side and give it the original drop shadow.

Add the word art and on the word Wanna/highlight it and go to Eye candy4 gradient 

glow with these setting

Basic-glow width 3.00/soft corners 25/overall opacity 100

Color-color #a2793e opacity 100 and apply to the word.

Add your copyright and watermark and gift to a friend!!!!

You're done!!!

Thanks for trying my tutorial

If you use send me a copy so I can show case it...thanks

Hot Kisses

Here's another tutorial I wrote.This is a very simple but elegant tutorial.

Any similarities to another tutorial is purely coincidental.All my tutorial are register
with My Free Copyright. Please do not claim as your own.This tutorial writer assumes you
have a working knowledge of using Paint Shop Pro. This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Joe Cano..You can purchase his tubes HERE

Please do not use without a license to do so

Scrap kit of Choice: I'm using one of my own called Hot Kisses...you can download HERE

Template of Choice: I'm using one of Missy templates#160..You can find it HERE

Please do not share with other,direct them to her site...Thanks Missy

Mask of Choice: I am using mask WSL207 ..you can get it HERE...Thanks Chelle

Font for name is Copper Penny dtp and copy write is always done in Pixelette ... Get them HERE

Drop shadow use throughout H-2/V-2/O-50/B-6.72

Filter used Alien Skin Eye Candy5-Nature- Fire get it HERE

     LET'S BEGIN

Open up Template and ShiftD and close original...delete copyright layer

close all layers except the background layer...the one we'll be working on

Choose a paper from the kit/copy and paste paper n top of background layer/resize to fit layer/

Go to layers/Load/save mask/load mask from disk/ and find your mask of choice...with these setting: create mask from source luminance..../orientation: fit to layer.../Options: Hide all masks/load /Layers/merge/merge group.

Now open up thin rectangle layer/activate the layer /choose paper of choice/copy paste paper/go to rectangle

layer and invert/go to paper layer and delete.

Repeat process with the second thin rectangle and the square layer

Now I deleted the large rectangle layer and used a heart frame/ Place heart frame over top of square layer

activate heart frame layer/selections/select all/float/defloat/modify/expand by 1

select another paper from kit and after resizing place on top of heart frame layer

Go to frame layer and invert/then to paper layer and delete/merge frame layer and paper layer

Now it's time to have fun with your imagination. Use whatever elements you want to make your tag your own.

I used the bow,heart charm and the lips

I changed the word art to Hot Kisses /selections/select all/float defloat/copy and paste with paper of

choice/go to word art layer and invert/go to paper layer and delete

Duplicate the word art 2 times for a total of three layers/ closed top two layers

go to effects/plug in and find the filter/use filter with these setting below

and random seed 0f 11/apply to first layer

close first layer and open 2nd layer and apply filter with random seed at 629

close 2nd layer and open 3rd layer and apply filter with random seed 1006

put drop shadow on all your layers except the word art layer

add your copyright and watermark and you're done

Now let's go to animation shop

closed top 2 layers of word art and copy-merge all layer and paste in animation

closed 1st word art layer and open 2nd layer and copy-merge layers and paste after current frame

in animation

closed 2nd layer and open 3rd layer of word art and copy-merge layers and paste after current frame

in animation/select all/ view animation..if ok saved as gif.

Thanks for trying my tutorial

If you use send me a copy so I can show case it...thanks

I'd like to thank Vicky over at The North Wing for this fabulous tag...

No Scrap Tutorial - Rac Babes Rocks

Here's another tutorial I wrote.This tutorial uses no scrap kit and is very easy to do..

This one is great for a beginner tagger.
Any similarities to another tutorial is purely coincidental.All my tutorial are register
with My Free Copyright. Please do not claim as your own.This tutorial writer assumes you
have a working knowledge of using Paint Shop Pro. This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Ismael Rac..You will need at least three tubes.
You can purchase his tubes HERE  Please do not use without a license to do so
Mask of Choice: I am using Mask #11 from MB Creations..unfortunately I can't remember where I got this from.If it is yours please contact me so I may give credit...Thanks
Font for name is Phatt Phreddy and copy write is always done in Pixelette ... Get them HERE
Drop shadow use throughout H-2/V-2/O-50/B-6.72


     LET'S BEGIN

Open up New Template 500x500/flood filled with white
Go to layers/Load/save mask/load mask from disk/ and find your mask of choice...with these setting

create mask from source luminance..../orientation: fit to layer.../Options: Hide all masks/load
Layers/merge/merge group.../re done mask again with a different color from one of your tubes
merge both groups together

Add your three tubes and position where you want them...add drop shadow...add some musical notes
chose a font and write Rac Babes Rocks and place on tag (see my tag)...resize all layers

Add your copyright and watermark and you are done...

Thanks for trying my tutorial
If you use send me a copy so I can show case it...thanks

No Scrap Tutorial - Brat With An Attitude

Here's another tutorial I wrote.This tutorial uses no scrap kit and is very easy to do..
Any similarities to another tutorial is purely coincidental.All my tutorial are register
with My Free Copyright. Please do not claim as your own.This tutorial writer assumes you
have a working knowledge of using Paint Shop Pro. This tutorial was done in Paint Shop Pro9,
but can be adapted to use in other Paint Shop Pro versions.

SUPPLIES NEEDED

Tube of Choice: I am using the awesome artwork of Ismael Rac..You can purchase his tubes HERE

Please do not use without a license to do so

Template of Choice: I'm using one of Kristin templates #58 from Wicked Dreams..You can find it HERE  Please do not share with other,direct them to her site

Mask of Choice: I am using Mask #27 from Sue's Creations..I'm sorry but Sue has closed her blog

I can not give this but please find another

Font for name is Riesling and copy write is always done in Pixelette ... Get them HERE

Drop shadow use throughout H-2/V-2/O-50/B-6.72

Filter used Mura Filter Meister- Copies..Please Google it.

     LET'S BEGIN

Open up Template and ShiftD and close original...delete copyright layer

close all layers except the background layer...the one we'll be working on

Choose a colors from your tube...I chose bc1517/go to layers new raster layer and flood fill with that

color/Go to layers/Load/save mask/load mask from disk/ and find your mask of choice...with these setting:

create mask from source luminance..../orientation: fit to layer.../Options: Hide all masks/load

Layers/merge/merge group...

open flower layer/selection/select all/float/defloat...color bc1517

using pixelette font size 8 type the word brat on top of the flower layer

go to Mura Filter Meister-copies with the following settings

Go to the flower layer/selections/select all/float/defloat/then invert
now to the word art layer and delete... brat word art should now be within the flower
Go to word art layer and duplicate/on original layer change  the color to white and close
and on copy layer flood fill with color from tube...I used C11318
Give bottom layer a drop shadow. On the heart layer/selections/select all/float/defloat
/modify/smooth...with smoothing amount-10/corner scale-10/anti-alias / preserve corners checked
flood-fill with white/ select none


0n the word layer change color to match your tag/ add your tube of choice/bring your tube down
until it  lays on the bottom of the brat word( see my tag )...add a drop shadow to tube
on the stars layer change the color to white...now add drop shadow to layers that were not done
previously.


Add your copyright and watermark and you are done...resize if needed


Thanks for trying my tutorial
If you use send me a copy so I can show case it...thanks

***************************************************************

Sky Blue over at The North Wing made this awesome tag using this
tutorial...thanks Sky

Looking for A Tutorial To Do

Looking For A TutThere are so many tutorial sites out there that you just can't seem to find them all. Looking for a special tutorial...or maybe you want something different...Well look no further. There's a new spot in town called THE TUT STOP...where you can post your tutorial for advertisement and shop for a new tutorial to do.So come on over and join us, we would love to have you....When you stop by tell them that Always Creations Tut Too sent you.